Hi Dieter,
There are several things you need to set up on the samba server for AD
user to have access to it.
* To be in the AD/domain
- smb.conf with the proper security mode, password server and realm
- net join the AD
- make sure the samba machine shows up in the list of trusted
computers and is properly accessible (DNS and that kind)
- make sure smbd, nmbd and winbind run
you can than check the list of users with the command
$ getent passwd
* To let users access unix services
- set up nsswitch.conf so passwd and group also use winbind
- set up pam properly, ie let it use winbind too.
I think this should work. At least that's what the doc says.
I am not really familiar with the error you're getting but it might be
because you're not using winbind.
Quote from the doc:
"If winbindd is not running, smbd (which calls winbindd) will fall back to
using purely local information from /etc/passwd and /etc/group and no
dynamic mapping will be used."
So make sure winbind is running, the HOWTO explains how to add it to you
/etc/init.d/samba.
It might vary depending on where you got samba from (official package or
distribution package).
Chapter 21 is on winbind.
I hope it works out for you.
Denis
Dieter Wilkens wrote:
>Hi Denis,
>
>I just tried this but still I can't log on the samba server with a
domain user!
>
>If I try to do so I get the error:
>
>[2003/10/29 08:48:37, 0] auth/auth_util.c:make_server_info_info3(1017)
> make_server_info_info3: pdb_init_sam failed!
>
>in the log file of the client on samba server...
>
>Is there anytihng else I have to adjust on the samba server?
>I sucessfully joined the domain with ADS and can see the server from my
windows machine - but as soon as I try to connect I get the error (exept with
one user that I created on the linux server....)!
>
>Any ideas?
>
>Here is my smb.conf
>
>**********************************************************************
>
>#======================= Global Settings ======================>[global]
> log file = /var/log/samba/log.%m
> server string = %h server (Samba %v)
> socket options = TCP_NODELAY
> encrypt passwords = yes
> security = ads
> realm = <MYREALM>
> workgroup = <MYDOMAIN>
> password server = <MYWINPDC>
> syslog = 0
>
>#====================== Shares ================================>[daten]
>comment = Daten auf Debian
>path = /daten
>browsable = yes
>guest ok = yes
>
>**********************************************************************
>
>
>
>-----Urspr?ngliche Nachricht-----
>Von: Denis M.J. [mailto:m21@altern.org]
>Gesendet: Dienstag, 28. Oktober 2003 21:52
>An: Dieter Wilkens
>Cc: samba@lists.samba.org
>Betreff: Re: [Samba] Help for Samba 3 and Win ADS
>
>
>If you're joining the AD you can use the mode ADS with the lines #
smb.conf:
> security = ADS
> realm = your.kerberos.realm
> encrypt passwords = yes
> password server = MYWINPDC
>
>please refer to section 7.4 (Domain Membership - Samba ADS Domain
>Membership) in the HOWTO.
>
>
>
>Dieter Wilkens wrote:
>
>
>
>>Thanks for that hint.
>>I downloaded the HOTO and tried to make everything like descibed there
>>but it is still not working ;-(
>>
>>I set the 'security = domain" the 'workgroup =
MYDOMAIN' and the
>>'password server = MYWINPDC' in the smb.conf and restartet
samba. After
>>that I tried the 'net join -S MYWINPDC -UMyAdmin%MyPassword' and
get
>>the following result:
>>
>>'realm must be set in smb.conf for ADS join to succeed.
>>ADS join did not work, faling back to RPC...
>>Joined domain MYDOMAIN'
>>
>>
>>
>>
>>
>>>>>From the PDC I can see the sambe server in ADS and in the
network
>>>>
>>>>
>>>
>>>
>>>
>>>
>>neighborhood. If I try to connect samba asks for a username and
>>password (should be OK with the DOMAIN-Admin.....). So I type in the
>>Admin and PAssword but without getting a connection. In the logfile on
>>the samba server there are the following lines in
>>'log.MYWINPDC':
>>
>>'[2003/10/28 10:18:50, 0]
auth/auth_util.c:make_server_info_info3(1017)
>> make_server_info_info3: pdb_init_sam failed!
>>[2003/10/28 10:18:50, 0] auth/auth_util.c:make_server_info_info3(1017)
>> make_server_info_info3: pdb_init_sam failed!
>>[2003/10/28 10:19:28, 0] auth/auth_util.c:make_server_info_info3(1017)
>> nake_server_info_info3: pdb_init_sam failed!'
>>
>>Any ideas wahts going wrong here?
>>
>>Regards
>>
>> Dieter
>>
>>"Adam Williams" <adam@morrison-ind.com> schrieb im
Newsbeitrag
>>news:Lgei.6Tu.1@gated-at.bofh.it...
>>
>>
>>
>>
>>>>Just started to play around with Samba 3 (on debian 3.0) and a
>>>>win2000 domain. Can anyone help me to integrate the Samba server
into
>>>>the win domain? It should act as a file server for the useres
and
>>>>groups from
>>>>
>>>>
>>>>
>>>>
>>win
>>
>>
>>
>>
>>>>and therefor I need different rights and permissions for the
>>>>shares... Any help is appreciated ;-)
>>>>
>>>>
>>>>
>>>>
>>>See the Samba-HOWTO-Collection available on the Samba website. It
>>>covers this in detail.
>>>
>>>--
>>>To unsubscribe from this list go to the following URL and read the
>>>instructions: http://lists.samba.org/mailman/listinfo/samba
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>