----- Original Message -----
From: "Kurt Weiss" <input.maillists@kwnet.at>
To: "j2" <spamfilter2@mupp.net>
Sent: Sunday, February 09, 2003 11:47 AM
Subject: Re: [Samba] "Incorrect function"?
>
>
> j2 schrieb:
> > I upgrade from 2.2.3 -> 2.2.7a using the debian packages. Now, i
have a
big> > problem.
>
> how about a few details?
> e.g.:
> 1) which access rights has the directory in linux/unix?
> 2) how about the relevant parts in your smb.conf file?
>
> >
> > Help... Please :)
> >
>
> everytime (if we can), but only if u help us helping ;-)
Here we go, conf and dir listing below
cookiemonster:/var/log/samba# ls -la /mnt/
total 20
drwxr-xr-x 9 root root 4096 Oct 29 08:44 .
drwxr-xr-x 21 root root 4096 Aug 8 2002 ..
drwxr-xr-x 2 root root 4096 Aug 20 22:48 samba
drwxr-xr-x 2 root root 4096 Oct 29 08:44 samba2
drwxrwxr-x 7 root data 146 Feb 9 01:15 silo-1
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
# $Id: smb.conf,v 1.2.4.6 2002/03/13 18:56:16 peloy Exp $
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#
#======================= Global Settings ======================
[global]
#log level = 9
# Change this for the workgroup/NT-domain name your Samba server will part
of
workgroup = MUPPNET
# server string is the equivalent of the NT Description field
server string = %h server (Samba %v)
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# You may wish to override the location of the printcap file
; printcap name = /etc/printcap
# 'printing = cups' works nicely
; printing = bsd
; guest account = nobody
invalid users = root
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to log though syslog only then set the following
# parameter to 'yes'. Please note that logging through syslog in
# Samba is still experimental.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smb,nmb} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# "security = user" is always a good idea. This will require a Unix
account
# in this server for every user accessing the server. See
# security_level.txt for details.
security = user
# You may wish to use password encryption. Please read ENCRYPTION.txt,
# Win95.txt and WinNT.txt in the Samba documentation. Do not enable this
# option unless you have read those documents
encrypt passwords = yes
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# --- Browser Control Options ---
# Please _read_ BROWSING.txt and set the next four parameters according
# to your network setup. The defaults are specified below (commented
# out.) It's important that you read BROWSING.txt so you don't break
# browsing in your network!
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 65
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# --- End of Browser Control Options ---
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
# Name mangling options
; preserve case = yes
; short preserve case = yes
# This boolean parameter controlls whether Samba attempts to sync. the Unix
# password with the SMB password when the encrypted SMB password in the
# /etc/samba/smbpasswd file is changed.
; unix password sync = false
# For Unix password sync. to work on a Debian GNU/Linux system, the
following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr>
for
# sending the correct chat script for the passwd program in Debian Potato).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f"
"%m" %s; rm %s' &
obey pam restrictions = yes
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; winbind uid = 10000-20000
; winbind gid = 10000-20000
; template shell = /bin/bash
#
#Settings
nt smb support = no
change notify timeout = 60
#======================= Share Definitions ======================
[homes]
comment = Home Directories
browseable = no
public = no
only user = no
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
writable = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want
to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700
# Un-comment the following and create the netlogon directory for Domain
Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
[printers]
comment = All Printers
browseable = no
path = /tmp
printable = yes
public = no
writable = no
create mode = 0700
# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; writable = no
; locking = no
; path = /cdrom
; public = yes
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
[silo-1]
comment = silo-1
browseable = yes
path = /mnt/silo-1
create mode = 770
force user = nobody
force group = data
public = yes
writable = yes
[peep]
comment = peep
browseable = yes
path = /mnt/silo-3/gefu
public = no
writable = yes
force user = gefu
force group = gefu