Hi everyone, I'm getting roughed up trying a new setup on my server. I tried this with 1.9.18p10 and now with 2.0.3, first I want to see if I'm getting this correctly and then if there's a solution to what I think is happening. I have the following setup: One server with two NICs IP1=130.6.96.2, IP2=130.6.98.2, SM = 255.255.255.0 (BTW, these are internal IPs, not internet ones). The second server handles routing across the two subnets. I have another router that handles traffic to the the corporate WAN. Traffic between subnets flows correctly, as does traffic to other networks. No problem routing. Now, I think I understand BROWSING.txt, but let me write my train of thought here and you guys can correct me. The 2nd server (the one with two NICs) has been configured as follows: preferred master = yes local master = yes domain master = yes browse list = yes os level = 33 wins support = yes dns proxy = yes workgroup = INFORMATICA Now, I have no NT server (fortunately). Clients in workgroup INFORMATICA have no problem seeing members of same workgroup on the other subnet, thanks to the SAMBA WINS server. I can even see a listing of all other workgroups, but when I try to browse the other workgroups that are on the other subnet I can't see any computers in those groups. If I search for a specific PC, I will locate it and be able to access it, no matter on what subnet it is. I believe this is normal behavior, acording to docs. Everyone registers on the WINS server, SAMBA collates browse lists for the workgroup, yadda, yadda... Now, my doubt (question) is this Is there anyway to have SAMBA collate browse lists for ALL workgroups in these 2 subnets? If the answer is no, when SAMBA handles PDC functions, will these be a non-issue? Thanks for your time Ariel R. Orellana