Nut upsuser - Jan 2016 - Not getting nut to work with Eaton 5115

Following the instructions a following site I can not get nut to work with
my UPS.

http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups

Hope that you can find out what is wrong by the provided info in the email

Best Regards,
Magnus Karlsson


# lsusb -s 001:005 -v

Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x06da Phoenixtec Power Co., Ltd
  idProduct          0x0002 UPS
  bcdDevice            1.00
  iManufacturer           4 Powerware
  iProduct               24 Powerware UPS
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               60mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              20
Device Status:     0x0000
  (Bus Powered)


************************************
/etc/udev/rules.d/90-nut-ups.rules

# Eaton 5115
ACTION=="add", SUBSYSTEM=="usb",
ATTR{idVendor}=="06da",
ATTR{idProduct}=="0002", MODE="0660", GROUP="nut"
************************************


************************************
Issuing command
root at laptux:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.6.4
Network UPS Tools - Generic HID driver 0.37 (2.6.4)
USB communication driver 0.32
This Liebert device (06da:0002) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
this does not fix the problem, try running the driver with the
'-x productid=0002' option. Please report your results to the NUT
user's
mailing list <nut-upsuser at lists.alioth.debian.org>.

No matching HID UPS found
Driver failed to start (exit status=1)
*******************************************



**********************************************
/etc/nut/nut.conf


MODE=standalone

***********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160122/66c2ded0/attachment.html>

On Friday 22 January 2016 21.35.16 Magnus Karlsson wrote:

Hi Magnus,
> Following the instructions a following site I can not get nut to work with
> my UPS.
> 
OK.
>
http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monito
> r-eaton-ups
> 
> Hope that you can find out what is wrong by the provided info in the email
> 
8<------------snip-----------------
> # lsusb -s 001:005 -v
> 
> Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               1.10
>   bDeviceClass            0 (Defined at Interface level)
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         8
>   idVendor           0x06da Phoenixtec Power Co., Ltd
>   idProduct          0x0002 UPS
>   bcdDevice            1.00
>   iManufacturer           4 Powerware
>   iProduct               24 Powerware UPS
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
8<----------------snip-------------

Yes this is the first 5115 model that uses a type of serial over usb.
You need to use the bcmxcp_usb driver for this one.

Add bcmxcp_usb to your ups.conf and test.
> ************************************
> /etc/udev/rules.d/90-nut-ups.rules
> 
> # Eaton 5115
> ACTION=="add", SUBSYSTEM=="usb",
ATTR{idVendor}=="06da",
> ATTR{idProduct}=="0002", MODE="0660",
GROUP="nut"
> ************************************
> 
> 
> ************************************
> Issuing command
> root at laptux:~# upsdrvctl start
> Network UPS Tools - UPS driver controller 2.6.4
> Network UPS Tools - Generic HID driver 0.37 (2.6.4)
> USB communication driver 0.32
> This Liebert device (06da:0002) is not (or perhaps not yet) supported
> by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
> this does not fix the problem, try running the driver with the
> '-x productid=0002' option. Please report your results to the NUT
user's
> mailing list <nut-upsuser at lists.alioth.debian.org>.
> 
So it's not a hid ups.

Regards
Kjell Claesson