Nut upsuser - Nov 2014 - Eaton-9130 (usbhid-ups) no battery.voltage parameter!

My windows version is 2.6.5-3, latest on NUT site.
"upsc ups" shows many ups parameters such as ups.load, battery.charge
etc. but there is no battery.voltage, which I need (ups - is the name of my
device in config).
If I load driver usbhid-ups in debug mode (-DD), I see something like
Ups.summary.bla-bla (sorry, don't remember exactly it's name) parameter
with the value, which looks like real battery.voltage, but there is no such
value in upsc output at all.

Any suggestions?

---
Valeri Linchevski
> 10 ????. 2014 ?., ? 22:32, Charles Lepple <clepple at gmail.com>
???????(?):
> 
>> On Nov 9, 2014, at 9:35 AM, ??????? ?????????? <v.linch at
icloud.com> wrote:
>> 
>> I've installed latest NUT under Windows XP, all works fine, but
when I run "upsc ups" command I don't see the battery.voltage
parameter, which I most need.
> 
> Can you provide a few more details? The latest version of NUT (2.7.2 at the
moment) has not been ported to Windows. Also, what does "upsc ups"
show?
> 
> -- 
> Charles Lepple
> clepple at gmail
> 
> 
>

On Nov 10, 2014, at 9:10 AM, ??????? ?????????? <v.linch at icloud.com>
wrote:
> My windows version is 2.6.5-3, latest on NUT site.
> "upsc ups" shows many ups parameters such as ups.load,
battery.charge etc. but there is no battery.voltage, which I need (ups - is the
name of my device in config).
> If I load driver usbhid-ups in debug mode (-DD), I see something like
Ups.summary.bla-bla (sorry, don't remember exactly it's name) parameter
with the value, which looks like real battery.voltage, but there is no such
value in upsc output at all.
> 
> Any suggestions?
> 
As hinted below, the (actual) output of "upsc ups" would be useful.

If you want, we can take a look at the debug output - let the driver run for at
least a minute, then gzip the output before posting to the list.
>> 10 ????. 2014 ?., ? 22:32, Charles Lepple <clepple at gmail.com>
???????(?):
>> 
>>> On Nov 9, 2014, at 9:35 AM, ??????? ?????????? <v.linch at
icloud.com> wrote:
>>> 
>>> I've installed latest NUT under Windows XP, all works fine, but
when I run "upsc ups" command I don't see the battery.voltage
parameter, which I most need.
>> 
>> Can you provide a few more details? The latest version of NUT (2.7.2 at
the moment) has not been ported to Windows. Also, what does "upsc ups"
show?
>> 
>> -- 
>> Charles Lepple
>> clepple at gmail
>> 
>> 
>> 
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
-- 
Charles Lepple
clepple at gmail

An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141111/7dd98eaa/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: usbhid.zip
Type: application/zip
Size: 5991 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141111/7dd98eaa/attachment-0001.zip>