similar to: Ippon Smart Winner 750/1000/1500/2000/3000

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello 2All. Today I had purchased Ippon Smart Power Pro 1400 UPS for my home PC. It is a higher class device relative to Ippon Back Pro model line. It has one RS232 port and one USB port to connect the monitoring station to. UPS talks with megatec protocol, RS232 works as usual. USB connection is done through Cypress Semiconductor usb-to-serial chip

Hi! I'm having problems connecting Ippon Smart power pro 1000 UPS to nut via usb under FreeBSD 7-stable The UPS uses megatec protocol and works fine via RS232 (UPS has RS232 and USB connectors) When I connect USB /dev/uhid0 is created. Tried port=/dev/uhid0 - doesn't work. Kernel rebuild w/o option uhid. On connect I get 2 devices /dev/ugen1, /dev/ugen1.1. Tried both of them.

Hello, I'm trying to get my UPS working with nut-hal-drivers, and it seems be detected correctly with Megatec protocol, but it provides wrong battery level. I read that I can use battvolts option to fix this problem, but HAL version of nut does not come with any config files. So, I'm guess it should be somehow fixed in sources? Parameters of Ippon Back Comfo Pro 800: VA = 800 max

Hi friends! It is not any answer to my previous letter about problem with nut 2.4.1 and ippon smart power 2000 UPS with megatec_usb driver. Maybe any additional information needed? Please help, any required info i get. -- ? ?????????, vk mailto:vk at union-metall.ru

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Hello Ace, 2007/1/6, ace <ace@ezotop.ru>: > Hello Arnaud, > > Ippon driver with SmartWinner 1000: charge value fix > > nut-2.0.2:ippon.c:line 31: > -- bcharge = ((atof (batvlt) - 10.2) / 3.4) *100.0; > ++ bcharge = ((atof (batvlt) - 24.0) / 3.4) *100.0; > > sorry for no comments, i'm bad in english the ippon driver has just been removed from the nut trunk,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day to all. In one of the offices I'm administering there are about 15 UPS marked with the brand "Ippon BackPro". This brand is widely popular in Russian Federation, while by itself is a 'Made in PRC' megatec clone. Depending on the model this UPSes have got either one standard serial RS-232C interface (cheaper models like

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hello, i'm trying to use nut with ippon back power pro 700 on FreeBSD 9.1-R with USB driver blazer_usb, and connection with UPS is unstable. I'm starting it: office at root # /usr/local/etc/rc.d/nut start Network UPS Tools - UPS driver controller 2.6.5 addchar: discarding invalid character (0xe2)! addchar: discarding invalid character (0x80)! addchar: discarding invalid character (0xb3)!

On 4/8/06, Dmitry Morozovsky <marck@rinet.ru> wrote: > On Fri, 7 Apr 2006, Mars G. Miro wrote: > > MGM> Greetz! > MGM> > MGM> I have an HP DL145 that I'm having problems with when connecting via > MGM> serial console. I think it's acpi-related. This is on 6.1-BETA4/amd64 > MGM> (5.X is the same also) > > [snip] > > It seems it's

Hi all! I have a ups Ippon smart power pro 2000. And it connects to my FreeBSD 7.2 x86 server throught usb. I'm try to setup it in nut with megatec_usb driver... But it is not recognizes ups. I'm try set productid and vendorid in ups.conf, but this is not help. Nut version 2.4.1 below i'm add output of lsusb, my ups.conf and /usr/local/libexec/nut/megatec_usb -a IPPON -DDD

On Dec 7, 2013, at 5:43 AM, Denis Yantarev wrote: > Ippon Back Power Pro responses are always padded to 64 bytes beyond \r payload terminator. When checking that command was successful (i.e. not echoed back) code relies on the response length reported by blazer_command which will always be 64. To fix this ippon_command should return actual payload length. This change also affects

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

Hi Stefanos, I've forwarded your mail to the nut user mailing list, which is the right place to get support. thanks to subscribe to it (http://alioth.debian.org/mail/?group_id=30602). Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I

Hello. I've been experimenting with the USB connection of an Ippon BackComfoPro 800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The current SVN version of NUT does not work with this device. The megatec_usb driver can't get a proper reply to a Q1 request, failing with an error message about "short read (14 bytes)" instead. I have found the reason for

Hello! I've got an "Ippon Back Power Pro 700 USB" UPS. The system is Gentoo/Calculate. The NUT version is *2.6.0-r1* I've made all necessary instructions to make NUT work properly with my UPS using USB "blazer_usb" driver. But, when I start *upsdrv* it tells me the following: * * Starting UPS drivers ...* *Network UPS Tools - UPS driver controller 2.6.0*

Hi all! I have a nut 2.4.1 on FreeBSD 7.1 i386. UPS model is IPPON smart smart power pro 2000. When i try to see battery charge, in output it have not such variable, and i can't control other servers (Win2k3 + WinNUT) because they not knows about current battery charge. How i can solve that problem? Thanks! upsc IPPON at localhost:54672 --------------------------- battery.voltage: 27.50

Hi, I've being using nut 2.2.2 (Debian Lenny) via megatec_usb driver for IPPON Back UPS 600. Then I upgraded to nut 2.4.3 (Debian Squeeze) with broken megatec_usb. I moved to blazer_usb, it connected IPPON. [myups] driver = blazer_usb port = /dev/usb/hiddev0 desc = "Local UPS" #from megatec.c: batteries[] = {{ 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 },

Hello, I've recently bought Ippon Smart Winner 3000 New (note the "New" in the model name) and I can't make NUT to work with it. Linux gateway 3.17.8-gentoo-r1 #1 SMP Mon Feb 16 13:46:11 MSK 2015 x86_64 Intel(R) Celeron(R) CPU 1037U @ 1.80GHz GenuineIntel GNU/Linux Network UPS Tools 2.7.2 1) USB connection partially works using usbhid-ups driver, the problem is that I