hi,
i have the following situation. my host system is running debian lenny
and kvm. i have 2 ethernet interfaces of which i like to use eth0 for
administration of the server itself without traffic from any guest
systems. eth1 is connected to a different switch where i have numerous
vlans. i have successfully setup a guest running virt-install using a
bridge interface on the host system. here the debian config for br1
which i used:
auto eth1.700
iface eth1.700 inet manual
auto br1
iface br1 inet manual
bridge_ports eth1.700
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
i was now looking into the xml file for the guest hoping to find a way
to use 2 ethernet interfaces for the guest one on br1 and another on br2
where br2 would be configures as br1 above on the host, just in a
different vlan. how can i do that ? the network section of the xml fine
lookes like this:
<interface type='bridge'>
<mac address='54:52:00:xx:xx:xx'/>
<source bridge='br1'/>
<model type='virtio'/>
</interface>
is there possibly a way of installing a guest with virt-install to give
the guest eth0 and eth1 which are in different vlans on the hosts eth1 ?
thanks for your help !
Jan
