In other words. I there a way that both phones are ring with only one extension? On 06.02.19 15:05, basti wrote:> both phones are in the same net. > when the soft phone is shut down, on hardware phone only an led is > flashing to show an incoming call but no sound. > > both phones use the same extension. that is the reason why I use pjsip. > > On 06.02.19 14:59, Antony Stone wrote: >> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >> >>> These two phones are not using the same extension, are they? >> >> If you shut down the softphone, does the hardware phone then ring? >> >> >> Antony. >> >>> On 2/6/2019 8:49 AM, basti wrote: >>>> both phones are registered. and the hardware phone can also make calls. >>>> but an incoming call is not displayed and also not hearing. >>>> >>>> Call Waiting is also disabled. >>>> >>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>> Hi, >>>>> look at your registrations, is the hardware phone registered? >>>>> if yes, which phone vendor do you want to connect? can you make >>>>> outgoing calls with hardwarephone? >>>>> >>>>> BR Cyril >>>>> >>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>> Hello, >>>>>> >>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the >>>>>> same time. >>>>>> >>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>> >>>>>> How can i fix this? >> >
Eric Wieling
2019-Feb-06 14:23 UTC
[asterisk-users] Freepbx / Asterisk PJsip multipe devices
That question was answered long ago.. https://wiki.asterisk.org/wiki/display/AST/Dialing+PJSIP+Channels On 02/06/2019 09:16 AM, basti wrote:> In other words. > > I there a way that both phones are ring with only one extension? > > On 06.02.19 15:05, basti wrote: >> both phones are in the same net. >> when the soft phone is shut down, on hardware phone only an led is >> flashing to show an incoming call but no sound. >> >> both phones use the same extension. that is the reason why I use pjsip. >> >> On 06.02.19 14:59, Antony Stone wrote: >>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>> >>>> These two phones are not using the same extension, are they? >>> >>> If you shut down the softphone, does the hardware phone then ring? >>> >>> >>> Antony. >>> >>>> On 2/6/2019 8:49 AM, basti wrote: >>>>> both phones are registered. and the hardware phone can also make calls. >>>>> but an incoming call is not displayed and also not hearing. >>>>> >>>>> Call Waiting is also disabled. >>>>> >>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>> Hi, >>>>>> look at your registrations, is the hardware phone registered? >>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>> outgoing calls with hardwarephone? >>>>>> >>>>>> BR Cyril >>>>>> >>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>> Hello, >>>>>>> >>>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the >>>>>>> same time. >>>>>>> >>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>> >>>>>>> How can i fix this? >>> >> >-- http://help.nyigc.net/
Mitch Claborn
2019-Feb-06 14:25 UTC
[asterisk-users] Freepbx / Asterisk PJsip multipe devices
You can do this in the dial plan. Register the devices separately and include both addresses in the Dial() command. Mitch On 2/6/19 8:16 AM, basti wrote:> In other words. > > I there a way that both phones are ring with only one extension? > > On 06.02.19 15:05, basti wrote: >> both phones are in the same net. >> when the soft phone is shut down, on hardware phone only an led is >> flashing to show an incoming call but no sound. >> >> both phones use the same extension. that is the reason why I use pjsip. >> >> On 06.02.19 14:59, Antony Stone wrote: >>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>> >>>> These two phones are not using the same extension, are they? >>> >>> If you shut down the softphone, does the hardware phone then ring? >>> >>> >>> Antony. >>> >>>> On 2/6/2019 8:49 AM, basti wrote: >>>>> both phones are registered. and the hardware phone can also make calls. >>>>> but an incoming call is not displayed and also not hearing. >>>>> >>>>> Call Waiting is also disabled. >>>>> >>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>> Hi, >>>>>> look at your registrations, is the hardware phone registered? >>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>> outgoing calls with hardwarephone? >>>>>> >>>>>> BR Cyril >>>>>> >>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>> Hello, >>>>>>> >>>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the >>>>>>> same time. >>>>>>> >>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>> >>>>>>> How can i fix this? >>> >> >
that was my first idea. and how should an other user know which number he should dial? user a: soft phone extension 100 hardware phone extension 101 On 06.02.19 15:25, Mitch Claborn wrote:> You can do this in the dial plan. Register the devices separately and > include both addresses in the Dial() command. > > > Mitch > > On 2/6/19 8:16 AM, basti wrote: >> In other words. >> >> I there a way that both phones are ring with only one extension? >> >> On 06.02.19 15:05, basti wrote: >>> both phones are in the same net. >>> when the soft phone is shut down, on hardware phone only an led is >>> flashing to show an incoming call but no sound. >>> >>> both phones use the same extension. that is the reason why I use pjsip. >>> >>> On 06.02.19 14:59, Antony Stone wrote: >>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>>> >>>>> These two phones are not using the same extension, are they? >>>> >>>> If you shut down the softphone, does the hardware phone then ring? >>>> >>>> >>>> Antony. >>>> >>>>> On 2/6/2019 8:49 AM, basti wrote: >>>>>> both phones are registered. and the hardware phone can also make >>>>>> calls. >>>>>> but an incoming call is not displayed and also not hearing. >>>>>> >>>>>> Call Waiting is also disabled. >>>>>> >>>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>>> Hi, >>>>>>> look at your registrations, is the hardware phone registered? >>>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>>> outgoing calls with hardwarephone? >>>>>>> >>>>>>> BR Cyril >>>>>>> >>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>>> Hello, >>>>>>>> >>>>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>>>> use pjsip driver and set "Max Contacts = 2" to have register >>>>>>>> both at the >>>>>>>> same time. >>>>>>>> >>>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>>> >>>>>>>> How can i fix this? >>>> >>> >> >
Floimair Florian
2019-Feb-11 08:59 UTC
[asterisk-users] Freepbx / Asterisk PJsip multipe devices
Or just do it right using the PJSIP_DIALPLAN_CONTACTS function:
Dial(${PJSIP_DIAL_CONTACTS(${EXTEN})})
With best regards
Florian Floimair
Innovation - Software-Development
COMMEND INTERNATIONAL GMBH
A-5020 Salzburg, Saalachstraße 51
http://www.commend.com <http://www.commend.com/>
Security and Communication by Commend
FN 178618z | LG Salzburg
Am 06.02.19, 15:26 schrieb "asterisk-users im Auftrag von Mitch
Claborn" <asterisk-users-bounces at lists.digium.com im Auftrag von
mitch_ml at claborn.net>:
You can do this in the dial plan. Register the devices separately and
include both addresses in the Dial() command.
Mitch
On 2/6/19 8:16 AM, basti wrote:
> In other words.
>
> I there a way that both phones are ring with only one extension?
>
> On 06.02.19 15:05, basti wrote:
>> both phones are in the same net.
>> when the soft phone is shut down, on hardware phone only an led is
>> flashing to show an incoming call but no sound.
>>
>> both phones use the same extension. that is the reason why I use
pjsip.
>>
>> On 06.02.19 14:59, Antony Stone wrote:
>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote:
>>>
>>>> These two phones are not using the same extension, are
they?
>>>
>>> If you shut down the softphone, does the hardware phone then
ring?
>>>
>>>
>>> Antony.
>>>
>>>> On 2/6/2019 8:49 AM, basti wrote:
>>>>> both phones are registered. and the hardware phone can
also make calls.
>>>>> but an incoming call is not displayed and also not
hearing.
>>>>>
>>>>> Call Waiting is also disabled.
>>>>>
>>>>> On 06.02.19 14:07, Cyril Alberts wrote:
>>>>>> Hi,
>>>>>> look at your registrations, is the hardware phone
registered?
>>>>>> if yes, which phone vendor do you want to connect?
can you make
>>>>>> outgoing calls with hardwarephone?
>>>>>>
>>>>>> BR Cyril
>>>>>>
>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb
basti:
>>>>>>> Hello,
>>>>>>>
>>>>>>> I have some user that had have a hardwarephone
and an softphone. I
>>>>>>> use pjsip driver and set "Max Contacts =
2" to have register both at the
>>>>>>> same time.
>>>>>>>
>>>>>>> But Only the softphone is ring. the hardware
phone is mute.
>>>>>>>
>>>>>>> How can i fix this?
>>>
>>
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at:
https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users