search for: multipe

Hi all, I am very new to wine and was able to successfully install it from the rpmforge repository. I was able to install multiping and ping plotter but when I try to use these programs to ping, they show 100% packet loss. Has anyone been able to setup these ping utilities to work in wine?

I need to generate output files as .csv file in a loop: let's say, I want to generate a sequence of files according to the loop number "i". the first file genearted should be file1.csv the second should be file2.csv I use: write.csv(temp, "file$i$.csv") in the loop but it did not work. can anyone give suggestions? thanks a lot. Jack

>From the fedora 19 host: [root@fedora ~]# sg_inq /dev/sdc standard INQUIRY: PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 length=36 (0x24)

Hi, How can I read multiple files(in a loop like manner) within a single code of R ? For example, I need to run the same code for different datasets (here list of companies) and since individual files are quite large, appending the files into one file is not a desirable option. Can this be done through a macro or sql kind of command? Thanks and Regards, Rahul S Menon Research Associate ISB,

Hi, I''m trying to use several sources to pick from in a remotefile statement: remotefile { "/etc/sudoers": mode => 0440, source => [ "config/apps/sudo/sudoers.${host}", "config/apps/sudo/sudoers" ], sourceselect => first } But it doesn''t seem to work. I get an error like this: "File source

Hi, I have a problem reg. the interconnection of Samba and XP und the "Fast User switching" facility of XP. Problem occurs like this: If there are more than one user logged into a XP machine (i.e via remotedesktop/fast user switching) only the last logged in user is able to access the samba shares. The other ones are getting a window which prompts for username and password, but

On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: > These two phones are not using the same extension, are they? If you shut down the softphone, does the hardware phone then ring? Antony. > On 2/6/2019 8:49 AM, basti wrote: > > both phones are registered. and the hardware phone can also make calls. > > but an incoming call is not displayed and also not hearing.

Hello, I have some user that had have a hardwarephone and an softphone. I use pjsip driver and set "Max Contacts = 2" to have register both at the same time. But Only the softphone is ring. the hardware phone is mute. How can i fix this?

that was my first idea. and how should an other user know which number he should dial? user a: soft phone extension 100 hardware phone extension 101 On 06.02.19 15:25, Mitch Claborn wrote: > You can do this in the dial plan. Register the devices separately and > include both addresses in the Dial() command. > > > Mitch > > On 2/6/19 8:16 AM, basti wrote: >> In

Hi r-helpers, When I issue the command latex(anova(raw1.lmer0, raw1.lmer, raw1.lmerI), file = 'raw1.tex', rownamesTexCmd = c('baR', 'addit', 'multip'), longtable = F, dcolumn = T, booktabs = T, t able.env = F, colheads = NULL, colnamesTexCmd = c ('', 'df', 'aic', 'bic', 'logl', 'chisq', 'chisqdf',

Hi! My telco is Deutsche Telekom and they got about 30 SIP servers right now. Currently I've set up a template for incoming calls in sip.conf and added each SIP server by it's IP address like this: [DTAG-in-1](DTAG-in-template) host=217.0.16.103 ... [DTAG-in-30](DTAG-in-template) host=217.0.20.99 I've done that to improve security and to be able to assign all calls coming in

On Wed, 2013-08-21 at 11:09 +0200, Paolo Bonzini wrote: > Il 21/08/2013 04:11, Timon Wang ha scritto: > > From the fedora 19 host: > > [root@fedora ~]# sg_inq /dev/sdc > > standard INQUIRY: > > PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] > > [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 > > SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0

In other words. I there a way that both phones are ring with only one extension? On 06.02.19 15:05, basti wrote: > both phones are in the same net. > when the soft phone is shut down, on hardware phone only an led is > flashing to show an incoming call but no sound. > > both phones use the same extension. that is the reason why I use pjsip. > > On 06.02.19 14:59, Antony

Thanks, the whole iSCSI LUN have been passed to the VM. But I test it with scsicmd, and found that the driver may be not support SPC-3, but if i use this by microsoft iscsi initiator, I can pass all the scsi3_test tests. Tool can be found here: http://www.symantec.com/business/support/index?page=content&id=TECH72086 It's this means that the scsi passthrough windows driver does not

I have read multipe messages here from people upgrading from 5.0 to 5.1, presumably using "yum update" to do the deed. When I do "yum update" on my (I think) fully updated Centos 5 system I get no updates. Am I just being impatient (i.e., the updates haven't yet been pushed out) or am I someh...

hi, I have json string in json request. i want to update the database using that string. how can i do that? There would be a multipal object in this string. sample string is:

Il 21/08/2013 04:11, Timon Wang ha scritto: > From the fedora 19 host: > [root@fedora ~]# sg_inq /dev/sdc > standard INQUIRY: > PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] > [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 > SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] > EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 > [RelAdr=0]

Thanks Nicholas. I found that scsicmd can't pass all the scsi3_test but the result of sg_inq is the same as it in the host. I am absolutely confused about this situation. Am I missed some information about it? On Wed, Aug 21, 2013 at 5:40 PM, Nicholas A. Bellinger <nab@linux-iscsi.org> wrote: > On Wed, 2013-08-21 at 11:09 +0200, Paolo Bonzini wrote: >> Il 21/08/2013 04:11,

Hello R folks. 1) The question that generated the data, which I call Qx: Which of the following 5 items have you performed in the past month? (multipe response) 2) How the data is coded in my current dataframe: The first item that a person selected is coded under a field called Qxfirst; the second selected under Qxsecond, etc. For the first Person, the NAs mean that that person only selected two of the five items. Hypothetical data is shown...

hello, i am trying to have multiple server instances on different ports on the same debian server. i thought if i had (along side the standard server files): /etc/icecast2/icecast+.xml config file (with changed port number) /etc/default/icecast+ pointing to new config file new log files with 777 permissions (for the sake of testing) and an /etc/init.d/icecast2+ file to start it all up