search for: multip

Hi all, I am very new to wine and was able to successfully install it from the rpmforge repository. I was able to install multiping and ping plotter but when I try to use these programs to ping, they show 100% packet loss. Has anyone been able to setup these ping utilities to work in wine?

I need to generate output files as .csv file in a loop: let's say, I want to generate a sequence of files according to the loop number "i". the first file genearted should be file1.csv the second should be file2.csv I use: write.csv(temp, "file$i$.csv") in the loop but it did not work. can anyone give suggestions? thanks a lot. Jack

>From the fedora 19 host: [root@fedora ~]# sg_inq /dev/sdc standard INQUIRY: PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 length=36 (0x24) Peripheral device type: disk Vendor identification: MacroSAN Product identification: LU Product revision level: 1.0 Unit serial number: fd01ece6-8540-f4c7-0000-fe170142b30...

Hi, How can I read multiple files(in a loop like manner) within a single code of R ? For example, I need to run the same code for different datasets (here list of companies) and since individual files are quite large, appending the files into one file is not a desirable option. Can this be done through a macro or sql kind o...

...#39;'t seem to work. I get an error like this: "File source /srv/puppet/dist/config/apps/sudo/sudoers.config/apps/ sudo/sudoers does not e exist" It seems like puppet concatenates the two files after dumping the variable "${host}". Shouldn''t it possible to use multiple sources when using a defined remotefile...? -- Med venlig hilsen Juri Rischel Jensen Fab:IT ApS Vesterbrogade 50 DK-1620 København Tlf: 70 202 407 / Fax: 33 313 640 www.fab-it.dk / juri@fab-it.dk

...ER and a \\samba\nobody. So it seems that the Samba isn't able to handle more the one user per XP machine. Our setup is a little bit trocky but not too much. We are using Samba 2.2.8a and a XP machine as password server. Does anybody knows about restrictions/problems regarding this setup or multiple user logged into an XP machine? Under native XP file sharing it is possible to change the user and to connect to the same XP-share from different accounts on the same machine. Thanks in advance. Sven Hahlbrock --

On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: > These two phones are not using the same extension, are they? If you shut down the softphone, does the hardware phone then ring? Antony. > On 2/6/2019 8:49 AM, basti wrote: > > both phones are registered. and the hardware phone can also make calls. > > but an incoming call is not displayed and also not hearing.

Hello, I have some user that had have a hardwarephone and an softphone. I use pjsip driver and set "Max Contacts = 2" to have register both at the same time. But Only the softphone is ring. the hardware phone is mute. How can i fix this?

that was my first idea. and how should an other user know which number he should dial? user a: soft phone extension 100 hardware phone extension 101 On 06.02.19 15:25, Mitch Claborn wrote: > You can do this in the dial plan. Register the devices separately and > include both addresses in the Dial() command. > > > Mitch > > On 2/6/19 8:16 AM, basti wrote: >> In

Hi r-helpers, When I issue the command latex(anova(raw1.lmer0, raw1.lmer, raw1.lmerI), file = 'raw1.tex', rownamesTexCmd = c('baR', 'addit', 'multip'), longtable = F, dcolumn = T, booktabs = T, t able.env = F, colheads = NULL, colnamesTexCmd = c ('', 'df', 'aic', 'bic', 'logl', 'chisq', 'chisqdf', 'prchisq')) I get: % latex.default(anova(raw1.lmer0, raw1.lmer, raw1.lmerI),...

...fficial list of the SIP servers :-( By some reverse engineering I found out that all SIP servers are within a specific subnet. Is there any way to match peers by subnet(s) instead of FQDNs or single IP addresses? If not, it would be a feature really needed to be able to cope with telcos running multiple or tons of SIP servers. cu, Markus -- / Markus Reschke \ / madires at theca-tabellaria.de \ / FidoNet 2:240/1661 \ \ / \ / \ /

...host: > > [root@fedora ~]# sg_inq /dev/sdc > > standard INQUIRY: > > PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] > > [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 > > SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] > > EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 > > [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 > > length=36 (0x24) Peripheral device type: disk > > Vendor identification: MacroSAN > > Product identification: LU > > Product revision level: 1.0 > &...

In other words. I there a way that both phones are ring with only one extension? On 06.02.19 15:05, basti wrote: > both phones are in the same net. > when the soft phone is shut down, on hardware phone only an led is > flashing to show an incoming call but no sound. > > both phones use the same extension. that is the reason why I use pjsip. > > On 06.02.19 14:59, Antony

.../]# sg_inq /dev/VM-IMAGES-BACKUP-DO-NOT-REMOVE/q_disk >> standard INQUIRY: >> PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] >> [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 >> SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] >> EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 >> [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 >> length=36 (0x24) Peripheral device type: disk >> Vendor identification: MacroSAN >> Product identification: LU >> Product revision level: 1.0 >> U...

I have read multipe messages here from people upgrading from 5.0 to 5.1, presumably using "yum update" to do the deed. When I do "yum update" on my (I think) fully updated Centos 5 system I get no updates. Am I just being impatient (i.e., the updates haven't yet been pushed out) or am I some...

hi, I have json string in json request. i want to update the database using that string. how can i do that? There would be a multipal object in this string. sample string is: [{"product":{"amt":300,"created_at":"2011-03-28T05:46:52Z","id":1,"prodnm":"maruti","qty":1,"rate":12,"updated_at":"2011-03-28T05:46:52Z"}},{&qu...

...itto: > From the fedora 19 host: > [root@fedora ~]# sg_inq /dev/sdc > standard INQUIRY: > PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] > [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 > SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] > EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 > [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 > length=36 (0x24) Peripheral device type: disk > Vendor identification: MacroSAN > Product identification: LU > Product revision level: 1.0 > Unit serial number: fd01e...

...t@fedora ~]# sg_inq /dev/sdc >> > standard INQUIRY: >> > PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] >> > [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 >> > SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] >> > EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 >> > [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 >> > length=36 (0x24) Peripheral device type: disk >> > Vendor identification: MacroSAN >> > Product identification: LU >> > Product revisi...

Hello R folks. 1) The question that generated the data, which I call Qx: Which of the following 5 items have you performed in the past month? (multipe response) 2) How the data is coded in my current dataframe: The first item that a person selected is coded under a field called Qxfirst; the second selected under Qxsecond, etc. For the first Person, the NAs mean that that person only selected two of the five items. Hypothetical data is shown...

hello, i am trying to have multiple server instances on different ports on the same debian server. i thought if i had (along side the standard server files): /etc/icecast2/icecast+.xml config file (with changed port number) /etc/default/icecast+ pointing to new config file new log files with 777 permissions (for the sake of...