that was my first idea. and how should an other user know which number he should dial? user a: soft phone extension 100 hardware phone extension 101 On 06.02.19 15:25, Mitch Claborn wrote:> You can do this in the dial plan. Register the devices separately and > include both addresses in the Dial() command. > > > Mitch > > On 2/6/19 8:16 AM, basti wrote: >> In other words. >> >> I there a way that both phones are ring with only one extension? >> >> On 06.02.19 15:05, basti wrote: >>> both phones are in the same net. >>> when the soft phone is shut down, on hardware phone only an led is >>> flashing to show an incoming call but no sound. >>> >>> both phones use the same extension. that is the reason why I use pjsip. >>> >>> On 06.02.19 14:59, Antony Stone wrote: >>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>>> >>>>> These two phones are not using the same extension, are they? >>>> >>>> If you shut down the softphone, does the hardware phone then ring? >>>> >>>> >>>> Antony. >>>> >>>>> On 2/6/2019 8:49 AM, basti wrote: >>>>>> both phones are registered. and the hardware phone can also make >>>>>> calls. >>>>>> but an incoming call is not displayed and also not hearing. >>>>>> >>>>>> Call Waiting is also disabled. >>>>>> >>>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>>> Hi, >>>>>>> look at your registrations, is the hardware phone registered? >>>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>>> outgoing calls with hardwarephone? >>>>>>> >>>>>>> BR Cyril >>>>>>> >>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>>> Hello, >>>>>>>> >>>>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>>>> use pjsip driver and set "Max Contacts = 2" to have register >>>>>>>> both at the >>>>>>>> same time. >>>>>>>> >>>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>>> >>>>>>>> How can i fix this? >>>> >>> >> >
Mitch Claborn
2019-Feb-06 14:41 UTC
[asterisk-users] Freepbx / Asterisk PJsip multipe devices
Eric sent you a link of how to do it at the PJSIP level. To do it in the dial plan, something like exten => _6XXX,1,Dial(PJSIP/SoftPhone&PJSIP/HardwarePhone) Mitch On 2/6/19 8:32 AM, basti wrote:> that was my first idea. > > and how should an other user know which number he should dial? > > user a: soft phone extension 100 > hardware phone extension 101 > > > On 06.02.19 15:25, Mitch Claborn wrote: >> You can do this in the dial plan. Register the devices separately and >> include both addresses in the Dial() command. >> >> >> Mitch >> >> On 2/6/19 8:16 AM, basti wrote: >>> In other words. >>> >>> I there a way that both phones are ring with only one extension? >>> >>> On 06.02.19 15:05, basti wrote: >>>> both phones are in the same net. >>>> when the soft phone is shut down, on hardware phone only an led is >>>> flashing to show an incoming call but no sound. >>>> >>>> both phones use the same extension. that is the reason why I use pjsip. >>>> >>>> On 06.02.19 14:59, Antony Stone wrote: >>>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>>>> >>>>>> These two phones are not using the same extension, are they? >>>>> >>>>> If you shut down the softphone, does the hardware phone then ring? >>>>> >>>>> >>>>> Antony. >>>>> >>>>>> On 2/6/2019 8:49 AM, basti wrote: >>>>>>> both phones are registered. and the hardware phone can also make >>>>>>> calls. >>>>>>> but an incoming call is not displayed and also not hearing. >>>>>>> >>>>>>> Call Waiting is also disabled. >>>>>>> >>>>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>>>> Hi, >>>>>>>> look at your registrations, is the hardware phone registered? >>>>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>>>> outgoing calls with hardwarephone? >>>>>>>> >>>>>>>> BR Cyril >>>>>>>> >>>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>>>> Hello, >>>>>>>>> >>>>>>>>> I have some user that had have a hardwarephone and an softphone. I >>>>>>>>> use pjsip driver and set "Max Contacts = 2" to have register >>>>>>>>> both at the >>>>>>>>> same time. >>>>>>>>> >>>>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>>>> >>>>>>>>> How can i fix this? >>>>> >>>> >>> >> >
Adam Goldberg
2019-Feb-06 15:00 UTC
[asterisk-users] Freepbx / Asterisk PJsip multipe devices
I think the question was "how do I do this with FreePBX", and a dialplan suggestion is likely difficult to do that way. I use groups: each phone has a different extension number (e.g., 601, 602, etc), and I created a dial group (600) which contains the phones' extensions. Then, a caller merely needs to dial 600 and it'll ring at several places. I'll leave it as an exercise for the reader to figure out how to dial from extension 601 but supply callerid = 600. -----Original Message----- From: asterisk-users [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mitch Claborn Sent: Wednesday, February 06, 2019 9:42 AM To: asterisk-users at lists.digium.com Subject: Re: [asterisk-users] Freepbx / Asterisk PJsip multipe devices Eric sent you a link of how to do it at the PJSIP level. To do it in the dial plan, something like exten => _6XXX,1,Dial(PJSIP/SoftPhone&PJSIP/HardwarePhone) Mitch On 2/6/19 8:32 AM, basti wrote:> that was my first idea. > > and how should an other user know which number he should dial? > > user a: soft phone extension 100 > hardware phone extension 101 > > > On 06.02.19 15:25, Mitch Claborn wrote: >> You can do this in the dial plan. Register the devices separately and >> include both addresses in the Dial() command. >> >> >> Mitch >> >> On 2/6/19 8:16 AM, basti wrote: >>> In other words. >>> >>> I there a way that both phones are ring with only one extension? >>> >>> On 06.02.19 15:05, basti wrote: >>>> both phones are in the same net. >>>> when the soft phone is shut down, on hardware phone only an led is >>>> flashing to show an incoming call but no sound. >>>> >>>> both phones use the same extension. that is the reason why I use pjsip. >>>> >>>> On 06.02.19 14:59, Antony Stone wrote: >>>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote: >>>>> >>>>>> These two phones are not using the same extension, are they? >>>>> >>>>> If you shut down the softphone, does the hardware phone then ring? >>>>> >>>>> >>>>> Antony. >>>>> >>>>>> On 2/6/2019 8:49 AM, basti wrote: >>>>>>> both phones are registered. and the hardware phone can also make >>>>>>> calls. >>>>>>> but an incoming call is not displayed and also not hearing. >>>>>>> >>>>>>> Call Waiting is also disabled. >>>>>>> >>>>>>> On 06.02.19 14:07, Cyril Alberts wrote: >>>>>>>> Hi, >>>>>>>> look at your registrations, is the hardware phone registered? >>>>>>>> if yes, which phone vendor do you want to connect? can you make >>>>>>>> outgoing calls with hardwarephone? >>>>>>>> >>>>>>>> BR Cyril >>>>>>>> >>>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti: >>>>>>>>> Hello, >>>>>>>>> >>>>>>>>> I have some user that had have a hardwarephone and an >>>>>>>>> softphone. I use pjsip driver and set "Max Contacts = 2" to >>>>>>>>> have register both at the same time. >>>>>>>>> >>>>>>>>> But Only the softphone is ring. the hardware phone is mute. >>>>>>>>> >>>>>>>>> How can i fix this? >>>>> >>>> >>> >> >-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users