asterisk users - May 2011 - Asterisk + Patton ISDN2e gateway (UK)

I know I asked this some time back, and I got no response then, and 
neither did someone who asked at the start of 2009 either by the looks of 
it (other than a reply from me to use a PCI card!!!)

However I now have a client who'd bought one of these boxes and installed 
ISDN2e - against my advice (because I got no feedback here, therefore 
they're junk with asterisk, right?)

However I'm currently stuck with it and it's a right royal PITA to
program
up by the look of it - I've done all the obvious stuff, and am now wading 
through their 600+page manual, but ugh...

So if anyone has used one with asterisk as a bridge to ISDN2e in the UK, 
would you mind sharing a config with me?

I have it registering (it pretends to be a SIP phone, it registers with 
Asterisk), but when I try to send a call to it, it times out - I do see 
debug on it's console though - same when I send a call into it from the 
PSTN side - I see ISDN debug messages, but no SIP activity.

And I thought Mediatrix units were bad - but at least they are relatively 
easy to program...

Bah.

Any clues appreciated,

Thanks,

Gordon

2011/5/24 Gordon Henderson <gordon+asterisk at drogon.net>
>
> I know I asked this some time back, and I got no response then, and neither
> did someone who asked at the start of 2009 either by the looks of it (other
> than a reply from me to use a PCI card!!!)
>
> However I now have a client who'd bought one of these boxes and
installed
> ISDN2e - against my advice (because I got no feedback here, therefore
> they're junk with asterisk, right?)
>
> However I'm currently stuck with it and it's a right royal PITA to
program
> up by the look of it - I've done all the obvious stuff, and am now
wading
> through their 600+page manual, but ugh...
>
> So if anyone has used one with asterisk as a bridge to ISDN2e in the UK,
> would you mind sharing a config with me?
>
> I have it registering (it pretends to be a SIP phone, it registers with
> Asterisk), but when I try to send a call to it, it times out - I do see
> debug on it's console though - same when I send a call into it from the
PSTN
> side - I see ISDN debug messages, but no SIP activity.
>
> And I thought Mediatrix units were bad - but at least they are relatively
> easy to program...
>
> Bah.
>
> Any clues appreciated,
>
Hi,

I don't have any specific knowledge of ISDN2e in the UK, but I can configure
patton devices (through embedded web server) to work with Asterisk.

Do not hesitate to contact me off-list if I can be of any help.

Regards

> Thanks,
>
> Gordon
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20110525/81a220ed/attachment.htm>