search for: isdn2e

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes - and then Asterisk? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be hon...

Hi! This weekend we had a problem with our Asterisk Box which ran flawlessly for nearly 4 weeks. The Asterisk server sits between the PSTN and a Siemens PBX and bridges 2 BRI lines. No calls, not incoming, not outgoing. The admin rebooted the Dell Box and then everything worked fine again. Now, I'm analyzing log files to find the cause. During the Asterisk outage the logfiles only show

I'm just getting started, and getting quite a strange result. I've been able to mount my (login hal) Linux home directory as E: on my w95 system, but when I try to "smbmount //isdn2/AMDAHL-WORK /mnt/amdahlwork", where /mnt/amdahlwork is an empty directory on Linux, isdn2 is defined in /etc/hosts as 192,168.1.2, the address the W95 box uses, and AMDAHL-WORK is the name under

Can anybody recommend an ISDN2e card that is a reasonable price. Also, does anybody know if the AVM B1 V4 card has the echo problems, I believe I saw somebody mention they had echo problems on the V3 card. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/p...

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm lost as...

I know I asked this some time back, and I got no response then, and neither did someone who asked at the start of 2009 either by the looks of it (other than a reply from me to use a PCI card!!!) However I now have a client who'd bought one of these boxes and installed ISDN2e - against my advice (because I got no feedback here, therefore they're junk with asterisk, right?) However I'm currently stuck with it and it's a right royal PITA to program up by the look of it - I've done all the obvious stuff, and am now wading through their 600+page manual,...

Hello all What I'm looking for is some plain speaking advice on ISDN. Currently using 4 analog lines connecting via a four port TDM400P FXO card. We need to physically move our installations, and on requesting the analog lines be moved - our telco (BT) is suggesting we replace our analog lines with ISDN2. We would have 3 x ISDN2 connections, giving us six voice channels. They've

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across multiple lines the line has to be installed in what they call "system access" using a "T" interface which can be seen here.. http://www.bt.com/isdn/i...

Hello For customers who need a small IP PBX to handle up to four ISDN lines (in France, so I guess that means EuroISDN) instead of a PC + Asterisk and an ISDN gateway box, has someone already played with the Atcom IP-4B? www.atcom.cn/IP-BRIM.html Any feedback appreciated.

Morning Asterikians, I've just got my nice shiny quadBRI card, and it seems to be working very well - except for one little issue - CallerID. The card is currently connected to an ISDN2e line in P2P mode, and an S0 adapter on our existing alcatel PBX. The S0 connection recieves callerID and displays it correctly - the 2e line doesn't, and BT have said that CLID was enabled on the line two days ago. Does anyone have any pointers on this? My configuration is avaliable on req...

Anyone have a quick recomendation for a 2-port (ie. 4 channels) BRI (ISDN2e) card in the UK? My usual source has 1 port and 4 port, but no 2-port cards... Thanks! Gordon

I am trying to send 'codes' over an isdn2 link - such as *#24# - to activate call forwarding. But it doesn't work. I have tried sending it as a straight dial, and also as a DTMF string...but no luck... I spoke to a telco tech and he said I had to send a facility code....huh? Anyone with any ideas on this one? PaulH

Hi, I'm looking for an interface card for termination of Euro-ISDN2 (BRI) lines. That is ISDN lines from the telco into my Asterisk box. Any recommendations, good/bad expiriences ? At present I'm looking at cards from BeroNet and Junghanns. Cheers, John Faroese Telecom

I'm getting a strange error on one of the two controllers on an AVM C2 card under chan_capi-cm-0.6.3. I have two ISDN controllers defined, both in the same group, both connections are UK ISDN2e Point to Point: On the third outbound call (both of the first two calls are handled by the second controller "ISDN2",) I get this error : chan_capi.c conf_error 0x2001 PLCI=0x301 Command=CONNECT_B3_CONF,0x8487 Does anyone have any idea what's going on here ? BT tell me there's...

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

...ow on and off, just SIP to SIP calls, using FWD and suchlike. I'm moving house at the beginning of September and have decided to build an Asterisk based system for my home office. I'm in the UK and wonder if anyone can give me advice on lines and hardware to use. Had planned to go with an ISDN2e line coupled with a BT Speedway ISDN card [1] from eBay for the PSTN side and Cisco 2940 and 2960G devices talking SIP for the internal phones. In addition to this I want to have extra numbers provided to me (MSN??) by BT and then set up Asterisk to handle calls differently depending on what num...

Hi there, quick question...do digium make any BRI cards (ISDN2) or even better a quad port BRI, maybe im going blind, but I cant see any on their website Cheers Gary

Hi :) My employer is looking to move a call centre to a new office, and has been increasingly frustrated with their legacy PBX (call-logging licensing and hardware upgrade costs). So I've stepped forth as the Open Source Pedant and suggested Asterisk so we can do all our own CallerID / call logging / analyses, and make use of IP Phones / teleworking, etc. The problem begins in that I only

Hi, Does anyone have a suggestion how I can analyze the concurrent usage of ISDN channels? A client complains about their clients sometimes getting a busy tone when trying to call them. I suspect they just need to add an additional ISDN2 line but I need some conclusive information that they are indeed maxing out their ISDN channels. Thanks, Patrick

Any one has documented how-tos for making voicetronix openline 4 to work with Asterisk. I have been contacting Australian Digium resellers and Digium cards are not approved in Australia. So I suppose Australian users are interested into putting Voicetronix in use. Any expereience to share will be most appreciated. David Kwok -------------- next part -------------- A non-text attachment was