I'm looking for a web GUI to Asterisk that I can run on some small embedded hardware. I've used FreePBX in the past but the overhead is not to my liking and it is entirely too complicated. I do not wish to change my entire OS just for the GUI either (aka AstLinux). Is there anything out there? I'd like to have only a small set of features, primarily the configuration of extensions, routing(in/out), "trunks", and ring groups. I welcome your suggestions. :-) Tim
Hi Tim, On Tue, Jan 12, 2010 at 6:56 PM, Tim Nelson <tnelson at fudnet.net> wrote:> I'm looking for a web GUI to Asterisk that I can run on some small embedded hardware. I've > used FreePBX in the past but the overhead is not to my liking and it is entirely too complicated. I > do not wish to change my entire OS just for the GUI either (aka AstLinux). Is there anything out > there? I'd like to have only a small set of features, primarily the configuration of extensions, > routing(in/out), "trunks", and ring groups. I welcome your suggestions. :-)I work on a project called "AskoziaPBX" which may be what you're looking for. It's for embedded devices (min. 64MB RAM, 200MHz) and aimed at beginners so the GUI is quite simple. We also use different terminology (trunks are 'providers' and extensions are 'phones'). We're not yet into named releases but are nearing release candidates for 2.0 (1.0 was based on FreeBSD and Asterisk 1.4, we've now moved to Linux and Asterisk 1.6.1). There's a Live CD you can try on generic x86 hardware, and firmware distributions for products we've specifically tested. Complete firmwares images are less than 15MB. More info here (incomplete site for 2.0): http://2.askozia.com/ Old 1.0 site: http://www.askozia.com/pbx Regards, -Michael
On Tue, Jan 12, 2010 at 08:56:05PM +0300, Tim Nelson wrote:> I'm looking for a web GUI to Asterisk that I can run on some small embedded hardware. I've used FreePBX in the past but the overhead is not to my liking and it is entirely too complicated. I do not wish to change my entire OS just for the GUI either (aka AstLinux). Is there anything out there? I'd like to have only a small set of features, primarily the configuration of extensions, routing(in/out), "trunks", and ring groups. I welcome your suggestions. :-)http://svn.asterisk.org/svn/asterisk-gui Designed especially for a minimal, embedded system. Runs no extra daemon besides Asterisk. That said, the "no-daemon" approach can be a limitation. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir