Hi all, For a while now I've been using Asterisk together with HFC-PCI cards (Cologne chipset) for Euro-ISDN BRI support. However, I do not consider this to be the most reliable solution and believe that the most stubborn problems have always been software related. If my clients are willing to spend a bit more money on different hardware, what do you think the best solution would be? I might even be willing to try out a more expensive PRI card if I knew it also supported BRI: just as long as I would no longer have to worry about the software support for it -- for both Asterisk 1.4 and 1.6. Thanks, Jaap
> > I might even be willing to try out a more expensive PRI card if I knew > it also supported BRI: just as long as I would no longer have to worry > about the software support for it -- for both Asterisk 1.4 and 1.6. > > Thanks, > > JaapYou can use Sangoma Media Gateway along with Asterisk ( http://wiki.sangoma.com/sangoma-wanpipe-smg-asterisk-bri-installation) That is known to work pretty well for lots of people. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy at sangoma.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090805/f7c5a957/attachment.htm
We use Patton BRI gateways. No problems so far. If possible, we prefer to keep telephony interfaces out of Asterisk box. Regards Jorge Jaap Winius wrote:> Hi all, > > For a while now I've been using Asterisk together with HFC-PCI cards > (Cologne chipset) for Euro-ISDN BRI support. However, I do not > consider this to be the most reliable solution and believe that the > most stubborn problems have always been software related. > > If my clients are willing to spend a bit more money on different > hardware, what do you think the best solution would be? > > I might even be willing to try out a more expensive PRI card if I knew > it also supported BRI: just as long as I would no longer have to worry > about the software support for it -- for both Asterisk 1.4 and 1.6. > > Thanks, > > Jaap > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
On Wed, Aug 5, 2009 at 5:28 PM, Jorge Mendoza <mendoza at tcc.com.pe> wrote:> We use Patton BRI gateways. No problems so far. > If possible, we prefer to keep telephony interfaces out of Asterisk box. > Regards > Jorge >Just for the record, Sangoma Media Gateway does exactly that, leave all your PSTN interfaces (BRI, SS7, PRI) in another box and communicates with Asterisk through the Woomera protocol. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy at sangoma.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090805/41a1bbd3/attachment.htm