Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the pwr2400b - ie how it connects to the cards. The web site is a bit devoid of the information and all the photo's are not clear. this would make my life rather simple, I have 12V + GND to supply the card - seems like people have done this with a TDM400, unfortunately the 410 is longer .... Alex -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc: Digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20090610/6ac0a3e2/attachment.pgp
On Wed, Jun 10, 2009 at 7:17 AM, Alex Samad<alex at samad.com.au> wrote:> Hi > > > recently bought a soekris net5501 and a tdm410 to place in there. > > I am having some issues attaching 12V power to the card via the molex > card - basically the box for the motherboard is too small.You can probably find the extension cable or connector you need here http://www.cyberguys.com/product-search/?keyword=molex
Alex Samad wrote:> I have read up about a PWR2400b and it seems to use 2wire pin, I am > guessing to connect to P8 just behind the molex connector on the tdm410. > > can any one here confirm this, or have any info on the pwr2400b - ie how > it connects to the cards. The web site is a bit devoid of the > information and all the photo's are not clear.No, the PWR2400B includes a PCI bracket with cables that connect to the Molex connectors on the cards. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA skype: kpfleming | jabber: kpfleming at digium.com Check us out at www.digium.com & www.asterisk.org
On Wed, 10 Jun 2009, Alex Samad wrote:> Hi > > recently bought a soekris net5501 and a tdm410 to place in there. > > I am having some issues attaching 12V power to the card via the molex > card - basically the box for the motherboard is too small.I know this mighs sound odd, but do you really need the +12V connection? You only need it if you have analogue phones plugged in and not exchange lines.. I know - this is obvious and you probably do have analogue phones plugged in, but I'm just checking!!! Gordon