search for: 2wire

Here is Mexico the phone company uses a DSL router from 2Wire which in my opinion is quite bad. I am having problems getting PAP2T adapters connected to Asterisk using these routers. They connect fine but after about 5 minutes I get a message on the Asterisk console that the ATA is unreachable. So far the only way I have found for the ATA to stay connected...

Jon, I actually had some more discussions with Tim on this issue, and it seems that the channel bank would still be a good option to choose for internal purposes. I would not see any other solution than a channel bank to connect many 2wire phones into one asterisk box. I had a talk today with Carrier Access, and it seems that the adit would do us fine. The fxs cards of the adit 600 are actually reprogrammable for uk phones (dip switches). We have requested a test platform from CAC which I hope would arrive here shortly, and we wou...

...> into pension. > > > > At present the plans are: > > * The IP phones are connected to a switch and the switch is connected to > the asterisk box via a network card. The asterisk box would be a > standard PC with Asterisk running on SuSE Linux 9.0. > > * The 2wire phones are connected to a channel bank and the channel bank > has got a T1 port which is connected to the asterisk box via a T1 card. > > My question concerns the channel bank. We would like to use a Carrier > Access ADIT 600 with > > * 1 dual T1 controller card > * 1 230 V...

My daughter has a BT account, with a BT supplied single-port router. I'd like to replace it with a standard router, but the settings appear to be totally hidden. If anyone reading uses BT, could you please tell me where to find the info? Maybe off-list, to save bandwidth for others/ Thanks Anne

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the pwr2400b - ie how it connects to the cards. The web site is a bit devoid of the information and all the photo's are not clear. this would make my life rath...

I just bought a new cheap compaq presario sr5010nx and so far have been unable to get my dsl up and running on Centos5. pppoeconf on Ubuntu works just fine -- same machine -- same harddrive. I've run adsl-setup and system-config-network? (separately) numerous times without success. So far I suspect a missing driver but suppose it could also be a detection issue. Suggestions or workarounds

Hi! I have this little problem here and i really don't know how to solve it. This is the scenario: I've setup a IVR, using my mobile phone I call my asterisk server and after pressing "1" the call is directed to my softphone at extension 100. The phone at extention 100 will ring until a certain time, and my mobile phone will cut off due to no one picking up my call. However,

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same firewall (same LAN). If eyebeam is configured to use asterisks internal ip, everything works fine, and of course, same LAN, no problems. The firewall external interfa...

...ndwidth for upload as for download. I am stuck I think in understanding speeds I connect to the internet through a router modem which gets the real IP and assigns me a private ip through dhcp. So this router can handle a private network, and route it to the internet, pressumably with nat. It is a 2wire ruter-modem I have come up with the next small script, which doesn''t works as I expected: ------------ #!/bin/sh DEV=eth0 NET="172.16.0.1/16" # Internal network works at 100mbps, which is also supported by the router. I don''t understand burst that much, I used that va...

A couple days ago I started having this problem where I am able to play wow for only a few minutes before it disconnects. Then I must restart the wow client in order to login again or I just get automatically disconnected from server. This happens on both of my Ubuntu machines and started happening at the same time. I can reboot to my Windows Vista partition and everything runs smooth. Ventrilo

...RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10) 00:0c.0 Ethernet controller: Qualcomm Atheros AR2413/AR2414 \ Wireless Network Adapter [AR5005G(S) 802.11bg] (rev 01) ]$ so, card is seen and readable. maybe needs drivers? also, not mentioned before; eth0 = xfinity modem eth1 = 2Wire 2701HG-B -- The important thing is not to stop questioning. - Albert Einstein CentOS GNU/Linux 6.8 KDE 4.3.4 peace out. tc,hago. g . =+= Tired of having your microsoft os hacked? Change to Linux os, used by microsoft hackers. =+= If Bill Gates got a dime for every time Windows crashes......

...nmbd, through logging on from the windows machine (amito) and and attempt to browse the network from it. I have also attached my smb.conf file. The network is very small. It consists of only 3 machines: # Gateway to the Internet and name server for the local net 192.168.0.1 homeportal.gateway.2wire.net # Windows client 192.168.1.34 amito.localdomain amito # Linux Samba server 192.168.1.35 claremont.localdomain claremont What's going on? -------------- next part -------------- # Samba config file created using SWAT # from 127.0.0.1 (127.0.0.1) # Date: 2005/04/07 17:33:00 # Global...

2 weeks ago, i had my internet service changed from copper DSL to fiber DSL. now, every time i reboot, internet connection is automatically connecting on boot. before last update to 6.6, i could configure connection, now i can not bring up configuration window to disable auto connect. because of uneasy feelings about leaving computer up when i leave home, i disconnect 'bell line' so

Dear all, Has anyone experienced this whilst running DRBD over eth1 between two CentOS 5.7 servers? eth1 is a private IP address, unroutable. eth0 is the public address. CentOS will reply sometimes once every 3 days or every 14mins~ saying "My public IP is on eth1" to arp requests when it's not, it's eth0. This freezes traffic and causes issues. We've looked at arp*

On 12/22/2016 12:44 PM, Fred Smith wrote: > On Thu, Dec 22, 2016 at 12:38:28PM -0600, geo.inbox.ignored wrote: >> On 12/22/2016 08:04 AM, Fred Smith wrote: >>> On Thu, Dec 22, 2016 at 03:06:12AM -0600, geo.inbox.ignored wrote: >>>> >>>> in not so distant past, 5.x, iirc, right clicking network connection >>>> icon in task bar brought up a

Hi, i am from Germany, so excuse my School English. I use Asteriks 1.2.12.1, zaptel 1.2.9 and mISDN Rc25 - since my update of Asterisk 2 wooks ago, Echos accure in my SIP Calls. I use SNOM 360, sometimes there is no echo (for example if i call myself via SIP->Asterisk->SIPProvider->TELEKOM->ISDN) but if i call other people there occures Echo many times. The Routing is always the

...4096 platform_params : virt_start=0xffff800000000000 xen_changeset : Wed Apr 07 12:37:57 2010 +0100 21089:484179b2be5d xen_commandline : dom0_mem=1024M cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1) cc_compile_by : root cc_compile_domain : gateway.2wire.net cc_compile_date : Wed Jun 23 04:06:21 IST 2010 xend_config_format : 4 mw-xen:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1a:a0:fc:9e:b1 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.255 inet6 addr: fe80::21a:a0ff:fefc:9eb1/64 Scope:Link...

I''ve finally started a blog. I really didn''t want to go public with it until I was sure I keep it up, but DHH posted a entry to his blog that I feel compelled to comment on. You can read about it on my blog: http://www.bloglines.com/blog/CurtHibbs Curt