similar to: Query about tdm410 cards

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Hi I am having some problem forcing my tdm410 to alaw over ulaw, I have 1.6.1.0 asterisk (debian i486) dahdi 1:2.2.0 built with the hardware echo canceller firmware /etc/asterisk/chan_dahdi.conf alaw=1-4 but I have this in the general section, before any channel definition dahdi show channel 1 Default law: ulaw even when i have a call going it is still ulaw Thanks Alex

Hello, I have a current asterisk 1.8.13.0 asterisk-addons 1.6.24 asterisk-sounds 1.2.1 dahdi-linux-complete 2.6.1+2.6.1 libpri 1.4.12 and asterisk-gui 2.1.0.rc1 (not trying to use the gui, want to do everything by hand) with a TDM410 with 2FXO and 2FXS. I have my POTS (PTNS) line plugged into port 1 (FXO) and a analog phone connected to port 3 (FXS). I compiled asterisk with asterisk

Hi I am in the middle of move a small business over from legacy PABX + PSTN lines to VOIP infrastructure. I borrowed a spa9000 to place between the PABX and the PSTN lines. I have had this going for a while (>5 months) and it has been working fine (some issues with echo and other minor things), which is why I am moving to asterisk. I bought a tdm410 with 3 fxo + fxs. The fxs is connected to

Hi I have a site that has asterisk install with a tdm410 one port is connected to a pstn that is used as a backup outbound line when/if the internet/voip is unavailable. Currently my dial plan for this line is to ignore it, I just basically do a s,1,noop s,n,wait (60) s,n,hangup what I would like to do is if I call from a certain number be given an option to run some commands or for the

Hi I had a working system, until recently - its asterisk 1.6.1 from debian - not the lastest as the last doesn't seem to work. but somebody who rang me said my voice mail announcement was all stuttery. so i dialed my voicemail box and its really stuttery... so I have done a reboot and its just as bad, now I am not sure what to check to try and get this working again ..... Alex

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

Hi I was wondering if any one has used these cards, I am looking at this as a replacement for the tdm410, I have some issues with installing the tdm410 in a small case because of the power plug being at the end of the board. I am in australia seems like we have a different setup for out fxs voltage, any one in oz using this card ? Thanks Alex -------------- next part -------------- A non-text

I am having a issues with adding a analog card to my dell 2800. I already have a t1 card installed and running fine but when I install the analog card asterisk will not start (ztcfg fails). I have determined it is because of a IRQ problem and have decided to get a new server. Can anyone suggest a server grade setup that supports this? I would rather not buy a machine that will be unstable. I

I didn't see this answered in the FAQ, and it's important to one of my application owners. How does RSYNC handle open or write in process files? Thank you! J jadams@molex.com john.adams@molex.com CONFIDENTIALITY NOTICE: This message (including any attachments) may contain Molex confidential information, protected by law. If this message is confidential, forwarding it to

Hi I am in the process of move a company from pstn to an asterisk setup. They had 2 pstn lines - only really needed a max of 2 previously. Now I have installed a tdm410 to handle the cross over from pabx to voip handset. this has been done, the tdm is now just used to provide a backup pstn line - only used as a last resort for outgoing calls - as its shared with a fax line. I use 2 voip

Hi I have a fxs (tdm410 ) connected to a pstn that is primarily used for faxing, it is meant to be a just in case line. How do I tell asterisk to ignore the line completely - ie don;t pick up when it rings ? Alex -- "I will have a foreign-handed foreign policy." - George W. Bush 09/27/2000 Redwood, CA -------------- next part -------------- A non-text attachment was scrubbed...

Hi I have an account with mynetphone (australia), which gives me two voip (sip) accounts, which i used to have connected to a spa9000. this is behind a firewall, so on the spa9000 I would listen on another port apart from 5060. so on the firewall 5060 would go to voip1 and 5061 to voip2. I moved to asterisk (+tdm410) and the machine was also the firewall and I had no problem - well atleast it

Hi I am trying to setup asterisk at home, I have 1 in bound VSP (I have a register cmd setup for that in asterisk). At home I have a cordless phone with 2 line capability - I currently have 2 spa3102's in place to handle the 2 lines ( I am in the process of buying tdm410 to handle to handle this and the backup pstn line). I also have 2 laptops setup with soft sip phones. What I would like

Howdy. I've been having trouble finding a fairly modern server that meets the following requirements: - Molex power connectors (don't want to use the Digium FXS power supply) - 4 PCI slots, one full-length (TDM2400P, 2xT100P, additional NIC) - dual power supplies - preferably dual CPUs >= 1GHz - preferably rack-mountable (3-4RU) - CentOS-friendly We'd also like to stay away from

Hello! In the near future, I'll be deploying an asterisk system that will have (in addition to many SIP handsets) four FXS handsets. Is there a known limitation to the length of cabling that can be used between a Digium/Openvox/Sangoma FXS card and the end station? I understand the card will need a molex power connector plugged in to provide extra voltage. With traditional phone systems, I

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came

I am looking for any assistance on a issue I am currently experience with Samba and Kerberos. We have kerberos and LDAP client software on UNIX (HPUX 11.11), which authenticates with AD (Windows 2000) using SFU 3.0. All samba users are stored on Active Directory. The HP newest version of samba I do believe is 3.0.2 which from HP is a beta version. I have worked with HP for several weeks to

Hi, I'm relatively new to Asterisk, and I'm looking to build a tiny system for home use. For context, at home I've got a line from Vonage (last I heard, they won't give out SIP credentials and let you use random hardware/software), which comes out as an analog line with a dialtone, and I'll be treating that as if it were a regular PSTN connection. I also work from home,