I am connecting 1.4.22 and dahdi 2.1.0.3+2.1.0.2 to a siemens hipath 300
and siemens hipath 4000. (2 channels to each switch)
with a TE210p card setup as T1 with em_w.
When the call is initiated to either switch the phone rings, when its
answered then nothing...
I hear no audio etc... After the timeout period the call is hung up.
The phone switch 300 needs the T1 reset as the channel is not freed up.
Anyone ever ran into this? What might be going on? Its installed on a
new dell poweredge 860.
Incoming calls I never see the "starting simple switch"...
----------------------
loadzone=us
defaultzone=us
span=1,1,6,esf,b8zs
e&m=1-2
span=2,1,6,esf,b8zs
e&m=25-26
----------------------- the card is on its own interrupt.
CPU0 CPU1
0: 92977641 0 IO-APIC-edge timer
1: 9 0 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 133 0 IO-APIC-edge i8042
14: 39 0 IO-APIC-edge ide0
50: 7629 2403996 IO-APIC-level uhci_hcd:usb1,
ehci_hcd:usb4, libata
66: 9326 92941584 IO-APIC-level wct2xxp
169: 294 1012573 IO-APIC-level eth0
177: 0 0 IO-APIC-level uhci_hcd:usb2
185: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 3066 4650
LOC: 91316250 91316178
ERR: 0
MIS: 0
----------------------------- chan_dahdi.c
[channels]
switchtype=national
signalling=em_w
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=smvoice-incoming
group=1
channel => 1-2
switchtype=national
signalling=em_w
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=smvoice-incoming
group=1
channel => 25-26
yes they are just using channels 1,2 on both T1's
Any thoughts?
Jerry
