Displaying 20 results from an estimated 900 matches similar to: "connection to siemens hipath"
2009 Feb 04
3
siemens hipath 4000
I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4
and asterisk 1.4.23 using a Te210P card.
the phone guy is saying that the lines are reporting always BUSY.
however on my end the status shows OK.
Anyone seen this? Is there something different about connecting PRI to
siemens hipath?
system.conf shows:
loadzone=us
defaultzone=us
span=1,1,6,esf,b8zs
bchan=1-5
dchan=24
2007 Mar 01
0
Siemens HiPATH 3700 with Asterisk
Hi,
I will like to know if anyone would guide me about how I can to interconnect
one SIEMENS HiPATH 3700 with Asterisk.
HiPATH have VoIP card and my idea is to do one un IP trunk between them so
we would to transfer calls and services (voicemail, IVR,..) between both.
We havent PRI ports unused in HiPATH so cheapest method of interconnection
is one IP trunk.
Any help or comment about will be
2004 Jun 08
2
Integration with a Siemens HiCom 150E / HiPath 3750
Hi * :-)
I found in the online WiKi docs some information on how to integrate
Asterisk with "old PBX"...
http://www.voip-info.org/wiki-Asterisk+legacy+integration
...but I couldn't find anything on integration with a Siemens HiCom
150E. Later on we'll migrate to a HiPath 3750 so information covering
this model would be nice too...
Do you know if any of the PBX listed
2011 Mar 10
1
Connecting Asterisk to Siemens Hipath 3750
Hello all,
I am trying to connect asterisk to a Siemens Hipath 3750 PBX system.
I have a physical connection issue. I know that I should use a crossover
RJ48 cable to link the two systems. The problem however is that the physical
interface of the Siemens system is very unfamiliar. From my digging around,
I think that this is an S2M interface.
http://www.mail-archive.com/asterisk-users at
2010 Nov 25
0
Siemens HiPath 1120
Hi all,
I want to use asteriks with my siemens hipath 1120 hardware.
Is it possible?
Thanks
--
/**
* @AUTHOR At?f CEYLAN
* Software
Developer & System Admin
* http://www.atifceylan.com
*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101125/a5b9e9f6/attachment.htm
2006 Jun 26
2
Asterisk x Siemens HiPath 4000
Hello all. I have installed and functioning asterisk-1.2.9.1 where I
effected one upgrade in asterisk-1.0.9, is interconnected with a PABX
Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is
happening he is that the calls originated for PABX Siemens and
destined to SIP phones asterisk are being without audio, nor Ring, is dumb.
They could help in this case me?
Best Regards
Josu?
2006 Jun 23
3
Asterisk-1.2.9.1 with Siemens HiPath 4000
Hello all.
I have installed and functioning asterisk-1.2.9.1 where I effected one
upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000
in ISDN PRI with protocol QSIG, the one that is happening he is that the
calls originated for PABX Siemens and destined to SIP phones asterisk are
being without audio, nor Ring, is dumb. They could help in this case me?
Best Regards
Josu?
2009 Feb 12
5
Siemens Hipath PRI to Asterisk Call Routing?
Hi all,
I have a connect between a siemens hipath & Asterisk system over PRI
The connection works perfectly I can call from the Hipath to an Asterisk
Extension.
I want to allow the hipath extensions to dial out over a SIP trunk on
asterisk but I keep getting "The number you have dialed is not in service"
In this CLI I'm dialing from hipath extension 9 (prefix for sip trunk)
2005 Aug 16
0
Help Asterisk -> Hipath 1500 V3.0
Hi,
I saw your posting on Hipath and Asterisk.I have some doubts on the same.it would be really nice of you if you can help me out.My Doubt is as follows
Currently I am using Hipath HG1500 V3.0 with Opticlient4.0. But i am not satisfied with the performance of Opticlient. I wanted to use SJPhone. Regarding this i had a talk with Seimens guys out here but they talk something ilogical. They told
2006 Feb 27
1
Asterisk and Hipath interconnections
Hi Stephen,
You said that PRI works great. We are using HiPath 3550 and Siemens
digital phone which using *11, *97 etc for function keys. However
Asterisk uses the the * key plus one or two digits for function keys as
well(it is common key combination for functions). So is it any way to
disable *11, *97 keys in HiPath system and pass this keys to Asterisk?
Thanks and regards,
Isaac
>Hi
2005 Dec 21
4
[offtopic] Asterisk <-IP-> Siemens HiPath 4000
Hello!
Is it possible to connect Siemens HiPath 4000 to Asterisk? What
equipment required on Siemens side? I mean IP not E1.
Sorry for asking here. Siemens-related websites use "salesperson
language". There is no technical information.
2006 Oct 19
1
siemens hipath interoperability - PRI/Q.SIG - card recommendation
Hello, if somebody using this scenario in production successfully,
please send me info, which ISDN card for asterisk server is usefull for
me (Digium, Sangoma)?
my crucial requirement is "caller id name" transfer/display between ISDN
(Siemens PBX) and IP phone connected to asterisk
I'm using PRI interface and Q.SIG signaling.
thank you
PJ
2003 Jun 30
1
Asterisk against 3 Com NBX 100 and Siemens HiPath 3700/3750
My new company is going to enter a bid competing with 3Com and Siemens
solutions from others.
Voice service is a PRI T-1 with a block of 100 DID numbers, a second T1 that
will carry Integrated voice/data, 12 voice/768K for redundency.
I asked this a week or two ago, now I have more details.
Best/$ channel banks that work with Asterisk and Best deal on phones... 16
business, 34 basic IP
2005 May 25
2
HiPath 4000 and Asterisk
Hi all,
I'm trying to setup Asterisk trunk to Siemens HiPath 4000 V2.01
What would be the best way to do so? I am a bit confused because as far
as I've understand this PBX doesn't support H323, but I saw somewhere
someone who created a cornet trunk and it worked using H323.
So if anyone knows what I need to configure I would appreciate it.
I've read some information
2006 Jun 29
0
hipath 3750 + hg1500 + asterisk
Has anyone here successfully tried this?
hipath 3750 --> hg1500 --> asterisk
i'm not sure with the flowlines though.
Thanks.
Lito
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060629/11f85674/attachment.htm
2014 Jan 09
2
How to read IRQs and timing slips values
Hi,
On a Asterisk 1.8.12 system working OK for months (>100k calls proceed),
users are complaining for bad audio.
My setup is:
PSTN <--E1/PRI ---> Asterisk <--- E1/PRI---> Siemens HiPath <---E1/PRI
---> PSTN
asterisk -rx "dahdi show version"
DAHDI Version: SVN-trunk-r10414 Echo Canceller: HWEC
asterisk -rx "pri show version"
libpri version: 1.4.12
A
2006 Mar 14
0
help required configuring card
Hii,
I've a Digium TE205P card and I'm running asterisk@home in a box.I want to configure this card in that box.But as it is a dual port card I'm not sure how to configure it in my box.By searching diffrent site I could able to make a sample configuration bellow I'm giving.Basically I want to connect one T1 connection in one port and in anather port of the card I'll
2005 Sep 15
0
Siemens Hi-Path help
hi all, anybody have a siemens hipath 3500 with a sm2/pri card? because
i need to connect to my box TE110P (e1) and i dont know how is the mode
in the pbx to change it.
thanks
--
.-
Pablo Allietti
LACNIC
2009 Oct 04
3
After call into console/dsp hangup hear ringing
I am running asterisk 1.4.26.1 and using ALSA not oss
dahdi 2.2.0
and libpri-1.4.10
I am calling into console/dsp I hear the audio just fine then after the
hangup I hear ringing
on the console/dsp.
Why would that be?
I found this bug for OSS https://issues.asterisk.org/view.php?id=13686
Does the same thing exist in ALSA???
some traces below
Jerry
== Parsing
2008 Dec 27
2
help with DAHDI hangup on calling out.
I installed DAHDI (2.1.0.3) on a machine with asterisk 1.4.22 and libpri
1.4.7
and I am getting the error:
-- Requested transfer capability: 0x00 - SPEECH
-- Called 23/317506XXXX
-- Channel 0/23, span 1 got hangup, cause 99
-- Hungup 'DAHDI/23-1'
on DIALING out. Calling in seems to work just fine.
Seems like everything is configured fine...
system.conf