Hi,
A newbie here trying to learn Asterisk. I've installed PiAF v.1.3(PBX in A
Flash) and trying to set up the TDM808E card as a test. For now I only have one
analog line. I went into the FreePBX interface and created a ZAP trunk with 1
as the Zap Identifier.
When I try to call out, I get the error "CHANUNAVAIL" and the
"All Circuits are busy" message. If I try to call in, Asterisk
doesn't pick up.
What am I doing wrong?? I been at this for days now and I don't see where
the issue is at!
TIA!
------------------------------
Output from Asterisk CLI
------------------------------
-- Executing [s at macro-dialout-trunk:19]
Dial("SIP/5134-088a9c90", "ZAP/1/7593548|300|") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s at macro-dialout-trunk:20]
Goto("SIP/5134-088a9c90", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:1]
GotoIf("SIP/5134-088a9c90", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL at macro-dialout-trunk:3]
NoOp("SIP/5134-088a9c90", "TRUNK Dial failed due to CHANUNAVAIL
(hangupcause: 0) - failing through to other trunks") in new stack
-- Executing [7593548 at from-internal:5]
Macro("SIP/5134-088a9c90", "outisbusy|") in new stack
-- Executing [s at macro-outisbusy:1]
Playback("SIP/5134-088a9c90",
"all-circuits-busy-now|noanswer") in new stack
-- <SIP/5134-088a9c90> Playing 'all-circuits-busy-now'
(language 'en')
== Spawn extension (macro-outisbusy, s, 1) exited non-zero on
'SIP/5134-088a9c90' in macro 'outisbusy'
== Spawn extension (macro-outisbusy, s, 1) exited non-zero on
'SIP/5134-088a9c90'
--------------------------------------------
root at pbx:/etc/asterisk $ ztcfg -vvvvv
--------------------------------------------
Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
8 channels to configure.
-------------------------------------
root at pbx:/etc $ cat /proc/zaptel/*
--------------------------------------
Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
IRQ misses: 1
1 WCTDM/0/0 FXSKS
2 WCTDM/0/1 FXSKS RED
3 WCTDM/0/2 FXSKS RED
4 WCTDM/0/3 FXSKS RED
5 WCTDM/0/4 FXSKS RED
6 WCTDM/0/5 FXSKS RED
7 WCTDM/0/6 FXSKS RED
8 WCTDM/0/7 FXSKS RED
--------------------------------
/etc/asterisk/zapata.conf
----------------------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-channels.conf
;Include AMP configs
#include zapata_additional.conf
------------------------
/etc/zaptel.conf
------------------------
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
fxsks=1
fxsks=2
fxsks=3
fxsks=4
fxsks=5
fxsks=6
fxsks=7
fxsks=8
# Global data
loadzone = us
defaultzone = us