search for: fxsks

...chan_zap.c:7489 mkintf: Unable to get span status: Inappropriate ioctl for device [Nov 18 10:30:44] ERROR[5557]: chan_zap.c:10466 build_channels: Unable to register channel '1-24' here's my zaptel and zapata config zaptel.conf: # Span 1: WCTDM/0 "Wildcard TDM2400P Board 1" fxsks=1 fxsks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxsks=9 fxsks=10 fxsks=11 fxsks=12 fxsks=13 fxsks=14 fxsks=15 fxsks=16 fxsks=17 fxsks=18 # Global data loadzone = us defaultzone = us zapata.conf: ; Span 1: WCTDM/0 "Wildcard TDM2400P Board 1" ;;; line="1 WCTDM/...

...7) zaptel.conf ---------------- # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: WCTDM/0 "Wildcard TDM2400P Board 1" fxsks=1 fxsks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxsks=9 fxsks=10 fxsks=11 fxsks=12 fxsks=13 fxsks=14 fxsks=15 fxsks=16 fxsks=17 fxsks=18 fxsks=19 fxsks=20 # channel 21, WCTDM, no module. # channel 22, WCTDM, no module. # channel 23, WCTDM, no module. # channel 24, WCTDM, no module. # Gl...

...dahdi.conf) * ; * ; This is not intended to be a complete chan_dahdi.conf. Rather, it is * intended * ; to be #include-d by /etc/chan_dahdi.conf that will include the global * settings * ; * * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 1 * callerid= * group= * context=default * * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel...

...hannel => 12 ############# END ZAPATA.CONF ###### ############# BEGIN ZAPTEL.CONF ###### # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A400 [slot:4 bus:16 span:1] fxoks=1 fxoks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxsks=9 fxsks=10 fxsks=11 fxsks=12 ############ END ZAPTEL.CONF ####### -- Raul Linux Counter #156439 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080103/199...

What is involved in provisioning Asterisk to use a multiline analog service from our local telco? I will only have one twisted pair entering in on a OpenVox card but am not sure how Asterisk interprets and deals with two incoming calls and/or two outgoing calls? Thanks! jlc

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different signaling options, I am left wondering what is the advantage of one over the other. Obviously fxsks has remote disconnect support, however if I were to go with gs or ls, what functionality would I re...

...gh on dynamic spans & bridged calls? And is there a way to verify this? Thanks! --------------------------------------------------------------------------------------------------------- /etc/zaptel.conf (16 channels on each PRI): loadzone=us defaultzone=us #Sangoma A400 [slot:7 bus:1 span:1] fxsks=1 fxsks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxoks=11 fxoks=12 dynamic=eth,eth1/00:50:c2:65:d0:3c/0,24,1 dynamic=eth,eth1/00:50:c2:65:d0:3c/1,24,0 # bchan=25-47 bchan=25-40 dchan=48 # bchan=49-71 bchan=49-64 dchan=72 -------------------------------------------------------------------...

...) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. cat /proc/zaptel/* says: Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" 1 WCTDM/0/0 FXOLS 2 WCTDM/0/1 FXSKS 3 WCTDM/0/2 FXSKS 4 WCTDM/0/3 FXSKS /etc/zaptel.conf is: # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" fxols=1 fxsks=2 fxsks=3 fxsks=4 # Global data loadzone = au defaultzone = au I have Googled for help but not found anything. Does anyone have any suggestions? TIA...

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

...t been many sleepless night by googling around trying to get the right answers. The digium card running on Intel 915G chipset. Below are my zaptel configurations. asterisk version: 1.2.9.1 Zaptel Version: 1.2.6 Echo Canceller: KB1 # Span 1: WCTDM/0 "Wildcard TDM2400P Prototype Board 1" fxsks=1 fxsks=2 fxsks=3 fxsks=4 fxsks=5 | | fxsks=21 fxsks=22 fxsks=23 fxsks=24 # Global data loadzone = us defaultzone = us [root#] lspci -vb 06:00.0 Ethernet controller: Digium, Inc. Wildcard TDM2400P (rev 11) Subsystem: Digium, Inc. Wildcard TDM2400P Flags: bus ma...

...00 Phones ================================================================= *zaptel.conf* *# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A400 [slot:4 bus:16 span:1] fxoks=1 fxoks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxsks=9 fxsks=10 fxsks=11 fxsks=12* ================================================================= *zapata.conf* *;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata opt...

...================== > *zaptel.conf* > /# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not > hand edit > # Zaptel Channels Configurations (zaptel.conf) > # > loadzone=us > defaultzone=us > > #Sangoma A400 [slot:4 bus:16 span:1] > fxoks=1 > fxoks=2 > fxsks=3 > fxsks=4 > fxsks=5 > fxsks=6 > fxsks=7 > fxsks=8 > fxsks=9 > fxsks=10 > fxsks=11 > fxsks=12/ > > > ================================================================= > *zapata.conf* > /;autogenerated by /usr/local/sbin/config-zaptel do not hand edit >...

...=> 11 context=from-zaptel group=5 signalling = fxs_ks channel => 12 *zaptel.conf:* # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A400 [slot:4 bus:16 span:1] fxoks=1 fxoks=2 fxsks=3 fxsks=4 fxsks=5 fxsks=6 fxsks=7 fxsks=8 fxsks=9 fxsks=10 fxsks=11 fxsks=12 -- Nacho Linux Counter #156439 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080227/0b29f4b5/attachment.htm

...There are 2 lines configured by the Telco as a rollover group (rings the line that is not busy) and they feed into a Digium AEX410 on the server. The most recent time this happened, I did a /etc/init.d/dahdi status and saw this: ### Span 4: WCTDM/1 "Wildcard AEX410" *53 FXO FXSKS (EC: VPMOCT032 - INACTIVE) RED* 54 FXO FXSKS (EC: VPMOCT032 - INACTIVE) 55 FXO FXSKS (EC: VPMOCT032 - INACTIVE) RED 56 FXO FXSKS (EC: VPMOCT032 - INACTIVE) RED 55 and 56 are always red - there is nothing plugged into those ports. 53 and 54 ar...

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing as...

hi every body; i installed zaptel 1.4,libpri 1.4, asterisk 1.4, asterisk-addons 1.4 succefuly, but i can't find the command "genzaptelconf, so i tink to install "handy zaptel toolset" please can someone tell me whitch package goes with zaptel 1.4, i consult "http://updates.xorcom.com/rapid/pool/main/z/zaptel/" but ????????????

Hello all. I am trying to get my second x100p card set up and am having some troubles. My zaptel.conf reads: fxsks=1-2 fxoks=3-4 defaultzone=us loadzone=us before adding this card my zaptel.conf read: fxsks=1 fxoks=2-3 defaultzone=us loadzone=us But now that I've made the change I am getting the following error when running modprobe wcfxo and of course the same error if I use /sbin/ztcfg...

I have Asterisk working with one FXO card (clone x100P card PCI card). I am trying to add 2 more cards so my question is - do I just increase the channel count on the zaptel.conf and zapata.conf files? [original] /etc/zaptel.conf fxsks=1 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] language=en context=from-pstn signalling=fxs_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no ;echotraining=yes echotraining=800 group=0 channel=1 [new] /etc/zaptel.conf fxsks=1-3 loadzone = us def...

Hey everybody, Is it alright to run two TDM400s on the same machine? If it is, how would one differentiate between the channels on each card? So, if I'm running strait FXS and my first card is fxsks 1-4, would the second be fxsks 5-8? Would there be any interrupt problems? Any help would be great! Thanks! Tj -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060628/36df49b3/attachment.h...

Hi, I've seen this USB product from Sangoma : http://www.sangoma.com/products_and_solutions/hardware/analog_telephony/usb_fxo.html Is it working ok ? Is it easy to integrate it with Asterisk ? How would you rate your experience with it ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: