Afternoon, I was hoping someone could point me in the right direction. I have an asterisk PBX deployed in China using a TDM400P based card. The incoming calls are being picked up correctly, but are not being hung up. I suspect that this might be an issue with the signaling that has been selected. If anyone here has deployed asterisk in china using an analog card, it would be a great help to hear about the configuration used. Best regards, Steven O'Reilly
Hi Steven, I do not live in China but I had the same problem. Try these 2 params inside zapata.conf: busydetect = yes hanguponpolarityswitch = yes It worked for me. Giorgio Incantalupo Steven O'Reilly wrote:> Afternoon, > > I was hoping someone could point me in the right direction. I have an > asterisk PBX deployed in China using a TDM400P based card. The incoming > calls are being picked up correctly, but are not being hung up. I > suspect that this might be an issue with the signaling that has been > selected. > If anyone here has deployed asterisk in china using an analog card, it > would be a great help to hear about the configuration used. > > Best regards, > Steven O'Reilly > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- _________________________________________________ Giorgio Incantalupo, mailto:gincantalupo at fgasoftware.com FG&A srl - http://www.fgasoftware.com - Voice at Work - The Agile PBX http://www.voiceatwork.eu Tel: 02997663.14, Fax: 0291390172
On Thu, Dec 13, 2007 at 11:40:32AM +0100, gincantalupo wrote:> Hi Steven, > I do not live in ChinaIs "live in China" good enough? How big is the variance between different regions, providers(?) etc?> but I had the same problem. > Try these 2 params inside zapata.conf: > > busydetect = yes > hanguponpolarityswitch = yesWhich of the two? busydetect will work almost always. But it is suboptimal: it may sotimes accidentally detect running calls. And it takes a few seconds to detect a hangup. If the provider sends you polarity events, you should be able to see them as debug messages of Asterisk (if debugging is turned on). -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
Rupert Utteridge - Digital Techniques (Asia) Limited
2007-Dec-14 02:50 UTC
[asterisk-users] TDM400 hangup issue in China
Thanks Steven and Giorgio that will work. There are a couple of other solutions depending on which telco you are connecting to and which exchange they are using. E1 offers more issues than PSTN. We are one of Digium's distributors in Asia with full technical support in China either out of our Hong Kong or Beijing offices. We have English and Chinese speaking people. Rupert Utteridge Director - Sales & Marketing Digital Techniques (Asia) Limited Room 0209, Tower 2 Beijing Bright China Chang An Building 7 Jianguomen Nei Avenue Beijing 100005 People's Republic of China Mobile: +86 136 8146 9331 Web: www.dtasia.net Message: 1 Date: Thu, 13 Dec 2007 13:37:12 -0500 From: Steven O'Reilly <soreilly at walled.net> Subject: Re: [asterisk-users] TDM400 hangup issue in China To: gincantalupo <gincantalupo at fgasoftware.com> Cc: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Message-ID: <1197571032.7777.10.camel at tanto> Content-Type: text/plain Thanks very much for the help Giorgio, I will give this a try today =) On Thu, 2007-12-13 at 11:40 +0100, gincantalupo wrote:> Hi Steven, > I do not live in China but I had the same problem. > Try these 2 params inside zapata.conf: > > busydetect = yes > hanguponpolarityswitch = yes > > It worked for me. > > Giorgio Incantalupo > > Steven O'Reilly wrote: > > Afternoon, > > > > I was hoping someone could point me in the right direction. I havean> > asterisk PBX deployed in China using a TDM400P based card. The incoming > > calls are being picked up correctly, but are not being hung up. I > > suspect that this might be an issue with the signaling that has been > > selected. > > If anyone here has deployed asterisk in china using an analog card,it> > would be a great help to hear about the configuration used. > > > > Best regards, > > Steven O'Reilly > > > > > > > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > >-- Best Regards, Steven O'Reilly soreilly at walled.net 647-724-8544:ext 106:Office 647-988-2311::Cell www.walled.net
Hi All; For me, I am in Kuwait and using the TDM22B and I used all the below settings and did not resolve my problem, I do not know if there is any other settings, or if there is a method to detect that no signaling is still existed on the, so we can do Hanup, the below settings used and did not resovle the hangup problem: busydetect=yes busycount=3 hanguponpolarityswitch=yes Any advise? Regards Bilal --------------- Thanks Steven and Giorgio that will work. There are a couple of other solutions depending on which telco you are connecting to and which exchange they are using. E1 offers more issues than PSTN. We are one of Digium's distributors in Asia with full technical support in China either out of our Hong Kong or Beijing offices. We have English and Chinese speaking people. Rupert Utteridge Director - Sales & Marketing Digital Techniques (Asia) Limited Room 0209, Tower 2 Beijing Bright China Chang An Building 7 Jianguomen Nei Avenue Beijing 100005 People's Republic of China Mobile: +86 136 8146 9331 Web: www.dtasia.net --------------- Thanks very much for the help Giorgio, I will give this a try today =) On Thu, 2007-12-13 at 11:40 +0100, gincantalupo wrote:> Hi Steven, > I do not live in China but I had the same problem. > Try these 2 params inside zapata.conf: > > busydetect = yes > hanguponpolarityswitch = yes > > It worked for me. > > Giorgio Incantalupo > > Steven O'Reilly wrote: > > Afternoon, > > > > I was hoping someone could point me in the rightdirection. I have an> > asterisk PBX deployed in China using a TDM400Pbased card. The incoming> > calls are being picked up correctly, but are notbeing hung up. I> > suspect that this might be an issue with thesignaling that has been> > selected. > > If anyone here has deployed asterisk in chinausing an analog card, it> > would be a great help to hear about theconfiguration used.> > > > Best regards, > > Steven O'Reilly____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs