asterisk users - Nov 2007 - AEX800 (TDM800 Express) - not detected

I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express.
(or AEX844 - 4FXS & 4FXO)
I downloaded Asterisk Now - and have got this loaded on a new
motherboard (Intel with 3 PCI, 3 PCI Express - etc).

(Downside on PCI-Express is the physical support the express slot gives
(very little) compared with an 'old' standard PCI slot!!!)

With only this card in the box.... "Asterisknow" gives me...

"no functional digium card found in /proc/zaptel" - or words to that
effect.


lspci gives me:
07:08.0 Ethernet controller: Digium, Inc.: Unknown device 8002 (rev 11)

# lsmod
Module                  Size  Used by
...
ztdummy                 5320  0
wctdm                  36032  0
wctdm24xxp             84672  0
zaptel                190184  6 zttranscode,ztdummy,wctdm,wctdm24xxp
crc_ccitt               3328  1 zaptel
...

-rw-r--r--  1 root root 119920 Jun 12 01:26
/lib/modules/2.6.19.7-0.4.smp.gcc3.4.x86_64/misc/wctdm24xxp.ko

# uname -a
Linux astnow.posix.co.za 2.6.19.7-0.4.smp.gcc3.4.x86_64 #1 SMP Tue May 1
12:07:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux


OK - so this is a Dual Core CPU, running in 64bit mode  :-) 

..but is this card not supported in the OS that Digium release in their ISO
image?

Also - the e1000 is not detected, so we added an old e100 card -and-
neither is the Marvel IDE controller - attached to the ICH9 SATA disk controller
- which makes installation fun (we used a USB Flash stick with the ISO image).

The Motherboard is an Intel Dragon-tail Peak (P35 chip set) - too bleeding
edge???

Help? (Clues - etc)

-- 
  .  .     ___. .__      Posix Systems - Sth Africa
 /| /|       / /__       mje at posix.co.za  -  Mark J Elkins, SCO ACE, Cisco
CCIE
/ |/ |ARK \_/ /__ LKINS  Tel: +27 12 807 0590  Cell: +27 82 601 0496

Mark J Elkins wrote:
> I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express.
> (or AEX844 - 4FXS & 4FXO)
It's not 'sort of', it *is* a TDM800 with a PCI Express bus
interface.
> With only this card in the box.... "Asterisknow" gives me...
> 
> "no functional digium card found in /proc/zaptel" - or words to
that effect.
This is a new card, and is probably not included in the version of
Zaptel included in the most recently distributed AsteriskNOW ISO
available from asterisknow.org. However, if you go to the rPath website
and follow the links to the AsteriskNOW project, you can download an ISO
image of 'beta 6.5', which includes updated components and likely will
recognize your AEX800 card.

-- 
Kevin P. Fleming
Director of Software Technologies
Digium, Inc. - "The Genuine Asterisk Experience" (TM)