search for: aex800

Hello I purchased an AEX800 card to replace the ageing cheap channel bank/T1 card solution a few months ago, assuming that it would be a more robust solution for my small scale phone system. However, it appears to be anything but that. Originally implemented as a XEN dom-u virtual machine on a large server class machine, usi...

I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express. (or AEX844 - 4FXS & 4FXO) I downloaded Asterisk Now - and have got this loaded on a new motherboard (Intel with 3 PCI, 3 PCI Express - etc). (Downside on PCI-Express is the physical support the express slot gives (very little) compared with...

Hi All, I have installed asterisk 1.6.2.8 Dahdi: 2.4.0 Digium card: Digium, Inc. Wildcard AEX800 8-port analog card I have configured this card properly and it is working for calls too, But there is issue of one way audio on this outbound routes only, My voice is going to outside pstn number but i am not able to get their audio, I have disabled firewall, selinux is also off. If I am applying...

I am running Asterisk 1.16.2.13, dahdi 2.4.0 and libpri 1.4.11.4 on an HP ML110 G6 using Ubuntu Linux 10.04 LTS. I have two Digium TE121 single T1 port cards and a Digium AEX800 8-port FXS card. All PCI Express cards. Co-workers are hearing hissing sounds on some calls, and I am getting IRQ errors when running "dahdi show status". I see that sharing IRQs for Digium cards isn't recommended, so I'm trying to set it so each card gets its own. From the fe...

Hi dears, I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor command. Where I am able to see and hear caller-id dtmf tones. Pl tell me the procedure to upload recorded file if you needed. Something I want to dig...

i have this card installed Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) following the steps below found on freepbx site cd /usr/src/dahdi-linux-complete-2.2.0.2+2.2.0 make make install make config /sbin/ztcfg echo "/sbin/ztcfg" >> /etc/rc.d/rc.local cd /usr/src/libpri-1.4.10.2 make clean make make in...

I'm trying to install both a Sangnoma A102 (with echo cancellation) card and a Digium 8 port analog card with echo cancellation (Digium AEX800E) in the same server. I know I probably shouldn't have mixed vendors - lesson learned for next time. That said, I have everything working fine...except Native Bridging between the Sangnoma and Digium cards. When I do native bridging, I get a very distorted sound (unusable, not just bad sound...

Has anyone used this board as an Asterisk server? http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE.cfm?typ=H&IPMI=Y I'm mostly interested about the possible compatibility issues this board may have with the AEX800 card.

Running Asterisk 1.6.2.9, DAHDI 2.3.0.1, CentOS 5.5 (update to date as of a week ago), I've installed a Digium AEX800P with 2 X400M FXO Modules and 1 VPMADT032 Module, hooked up to 5 analog lines. I get the error message referenced in the subject in my dmesg output everytime I load / reload DAHDI using the command "system dahdi start/restart". When I make an outbound call over these analog lines, I'...

Just noticed this today: Digium TE220B Dual Span T1/E1 PCI Express Card with Octasic DSP-based Echo Cancellation Module<http://www.voipsupply.com/product_info.php?products_id=3352> It's about time Digium got on the ball and made PCI-e cards. What are people's experiences with this card? Anyone know if there are plans for a PCI-e analog card for FXO use? -------------- next part

Hi All, This is a request for testing for users of Asterisk 1.4 or 1.6 with any of the following Digium VoiceBus based cards: TDM2400P, AEX2400, AEX800, TDM800P, TDM410, TE120P, TE121, and/or TE122. From a practical standpoint, this branch should allow these boards to work in more systems / configurations where IRQ misses caused problems in the past. The updated wctdm24xxp and wcte12xp drivers are based on Zaptel 1.4 and work by dynamically...

Hi - I had a client recently move their asterisk system (asterisk 1.4.26, dahdi 2.2.0.1, aex800 w/vpm module) to a "new" location, a building that's nearly 150 years old. I was not personally able to go there, but the person who did the move said the building's demarc room was "scary"-- water leaks, jumbled and frayed wiring, and all sorts of other fun. The echo...

...but do not know of how to "tune" the DAHDI settings on the Asterisk side. The options looked limited. Or, conversely, what settings does Asterisk expect to see? If I knew that, I could tune on the Fujitsu side of the equation. BTW, the telephony hardware we are using is a Digium Wildcard AEX800 Board 1. Thanks for any help any of you can provide. - Will

...0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) 04:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID (rev 01) 05:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 06:08.0 Ethernet controller: Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) (rev 11) 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) da...

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.