asterisk users - May 2007 - ZAP Error: Unable to create channel of type 'Zap'

Hi Group,
I have a problem with my FXO interface. It seems that asterisk cannot 
see any configured channels, only pseudo. Pls see the error and my 
config below.
Rgrds
Markus


-----
May  2 15:09:00 NOTICE[17327]: app_dial.c:1010 dial_exec_full: Unable to 
create channel of type 'Zap' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'IAX2/ctalk-7' status is
'CHANUNAVAIL'
------


Specs:
===SuSE Linux 9.1 (x86-64)
2.6.5-7.202.7-smp
asterisk-1.2.1
zaptel-1.2.1


lspci
==0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0c)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express 
Port A0 (rev 0c)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express 
Port B0 (rev 0c)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express 
Port C0 (rev 0c)
0000:00:1c.0 PCI bridge: Intel Corp. Enterprise Southbridge Hublink 
PCI-X Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. Enterprise Southbridge USB 1.1 
UHCI (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. Enterprise Southbridge USB 1.1 
UHCI (rev 02)
0000:00:1d.4 System peripheral: Intel Corp. Enterprise Southbridge 
Watchdog Timer (rev 02)
0000:00:1d.5 PIC: Intel Corp. Enterprise Southbridge IOxAPIC (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. Enterprise Southbridge USB 2.0 
EHCI (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 0a)
0000:00:1f.0 ISA bridge: Intel Corp. Enterprise Southbridge ISA Bridge 
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. Enterprise Southbridge PATA (rev 02)
0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL 
(rev 27)
0000:01:04.0 System peripheral: Compaq Computer Corporation: Unknown 
device b203 (rev 01)
0000:01:04.2 System peripheral: Compaq Computer Corporation: Unknown 
device b204 (rev 01)
0000:02:01.0 RAID bus controller: Compaq Computer Corporation: Unknown 
device 0046 (rev 01)
0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 
Gigabit Ethernet (rev 10)
0000:02:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 
Gigabit Ethernet (rev 10)
0000:06:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:06:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:07:01.0 Communication controller: Individual Computers - Jens 
Schoenfeld Intel 537


lsmod
===...
wcfxo                  23072  0
zaptel                212008  1 wcfxo
...


zztool
===Zapata Telephony Interfaces
Alarms          Span
OK              Wildcard X101P Board 1
Current Alarms:     No alarms.
Sync Source:        Internally clocked
IRQ Misses:               0
Bipolar Viol:             0
Tx/Rx Levels:         0/  0
Total/Conf/Act:       1/  1/  1   
  1
TxA -
TxB -
TxC -
TxD -
RxA -
RxB -
RxC -
RxD -


ztcfg
==Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.


/etc/zaptel
======loadzone=uk
defaultzone=us
fxsks=1


/etc/asterisk/zapata.conf
===============[trunkgroups]
[channels]
; context=default
switchtype=national
; signalling=fxo_ls
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=4
signalling=fxs_ks
context=incoming
group = 1
channel => 1


zap show channels
===========   Chan Extension  Context         Language   MusicOnHold
 pseudo            default


zap show status
==========Description                              Alarms     IRQ        
bpviol     CRC4
Wildcard X101P Board 1                   OK         0          0          0