search for: southbridge

...I bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0c) 0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 0c) 0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 0c) 0000:00:1c.0 PCI bridge: Intel Corp. Enterprise Southbridge Hublink PCI-X Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. Enterprise Southbridge USB 1.1 UHCI (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. Enterprise Southbridge USB 1.1 UHCI (rev 02) 0000:00:1d.4 System peripheral: Intel Corp. Enterprise Southbridge Watchdog Timer (rev 02) 00...

Dear, I''m looking to get Xen running on a system that (afterwards) seems a bit too new. The board has the Intel G33 chipset with the Intel ICH9 southbridge. This chipset is NOT supported by kernel 2.6.18 which ships with Xen 3.1.2 (and Debian Etch). So the question is: * What version of Xen to install to get going? Should I choose unstable? * What distribution will be the easiest to get started? (I got a custom Debian Etch with 2.6.23 kernel working)...

Does anyone have any experience with Super-Micro brand motherboards // dual Xeon cpu's? Had to swap out my Tyan piece of junk and going back with the S-M board. I believe it has similar north/southbridge chips on it -- at least they are the intel MCH ICH5R and PXH plus the 82546GB. One area that the Tyan board was seriously lacking in was in the hardware monitoring department. The S-M board uses a winbond 83627HF chip. Another area I'm wondering about is with the SATA controller. Suppo...

Hi All, I have a thin cliente here that i want to run asterisk: - National Semicondudor Geode GX1 266MHz Geode 266MHz single chip - NS Cx5530a Southbridge National Semiconductors SC2200 - NS PC97317 in chipset - 32MB Compact Flash - 64MB Ram - 10/100Mbps, Autosense 10/100Mbps, Autosense Realtek 8139C National DP83815 / DP83816 Some tip? I have a ide>flash adaptor to make the install... I need recomendations in Linux dist...

...me, I cloned the hard drive... The machine that is working fine is a Asus M5A97 R.20 + Zogis GeForce GT210 The machine that is with blank screen after Xorg is loaded is ASRock 980DE3/U3S3 + Point of View GeForce GT210. What can I do to solve this problem? ASRock has: Northbridge: AMD RX881/760G; Southbridge: AMD SB710 And Asus has: Northbridge: AMD 970; Southbridge: AMD SB950 Tnx for your help! *Other outputs:* *-core description: Motherboard product: M5A97 LE R2.0 vendor: ASUSTeK COMPUTER INC. physical id: 0 version: Rev 1.xx serial: 130207833100091 slot:...

...n run fsck_ufs on them. so this way I can have the box running again. as I can't count on no power outage till the end of days, what can I do ? i just recompiled stable to make it stop this, but no go here ... this is an AthlonXP as said, running on EPoX kt600 based board, sata I is from via southbridge and 1GB of RAM. just another 40GB disk to the system. thanks, matheus -- We will call you cygnus, The God of balance you shall be

I have a Lite-On 24102B burner on an Epox 7KXA (VIA 686A southbridge) together with a few SCSI disks. I recently upgraded from FreeBSD 4.5 to 4.7 then almost immediately to 4.8. I've had trouble with the burner since. With FreeBSD 4.5, I used "sysctl hw.atamodes=---,---,dma,---" to set the burner to DMA. Everything then worked fine. As far as I k...

...the SB (00:14.0). As currently configured by the BIOS, the NB IOAPIC is _entirely_ disabled, with only the SB IOAPIC enabled and configured. From 48693.pdf, it would seem that the NB is improperly configured, as 6.4.1 recommends that "The IOAPIC should be enabled by the system BIOS and the southbridge routing feature should be switched on. This will allow the interrupts to be forwarded to the PIC in the southbridge. This way, if the system boots in DOS, interrupts will still work. Once the system boots an ACPI OS (where IOAPIC is assumed to be supported), the system BIOS will disable the southbr...

Hi! From other people posting to this list, I know that there has been a bug related to the issue described in Xen Security Advisory 36 that disables iommu for some AMD users like me. However, even when passing "iommu=no-amd-iommu-perdev-intremap" it still disables i/o virtualisatoin. Related Xen dmesg output: (XEN) IVHD Error: Invalid IO-APIC 0 (XEN) AMD-Vi: Error initialization

...dn't find a valid partition table, and the geometry is way off. My SATA disk is a WD740GD, a 74GB drive. Fdisk thinks it is 30MB, 255 heads, 63 sector/track, 3 cylinders. Have I done something wrong, or is the VIA SATA support in this kernel just not gonna hack it? The SK8V uses the VIA VT8237 southbridge chipset if anyone knows about this. Thanks for any help. -- C. Linus Hicks <lhicks at nc.rr.com>

Hello, since applying the patches related to XSA-36 Xen recognizes a broken IVRS ACPI table and disables I/O virtualisation. I contacted the manufacturer of the mainboard/BIOS and they want to help me by providing a patched BIOS - so far so good. However, they need details about what to fix, which I don''t know either. Could you pls. give me some hints which I can forward to the

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

...> a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: > http://preview.tinyurl.com/3knjrp ) which utilizes the intel ICH7 > southbridge for sata devices. I am currently running FreeBSD > 7.0-STABLE. The issue is that although the sata controller is > apparently detected correctly (It shows up by name in dmesg) the > devices attached to it do not show up when running 'atacontrol list'. > There are no errors prod...

Anyone out there ever overclocked core 2 duo on centos 5 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080204/9d7f29ec/attachment-0001.html>

...Gtalk: [8]revanth.recruiter at gmail.com | Yahoo: [9]revanthg90 at yahoo.com [10]http://www.linkedin.com/in/revanthkgudimalla [11]https://www.facebook.com/CodeForce360 [12]http://twitter.com/codeforce360 [13]http://www.linkedin.com/company/codeforce-360 Office Location: 11381 Southbridge Pkwy, Alpharetta, GA 30022 [14]Click here to unsubscribe from our mailing list and your name will be removed immediately. _________________________________________________________________ This email is generated using [15]CONREP software. [16][8011234857.jpg] G5540 R...

Hello, I found a strange problem with allocationg big files on drive. For example in guestfish I allocate large disk image for example: $ guestfish ><fs> allocate test.img 20G When an image allocating, there is a big slowdown of guest OSes, launched on host machine, and on different drives. For Linux guests with virtio drivers, there is no so big performance penalty, but for FreeBSD

Hello, I found a strange problem with allocationg big files on drive. For example in guestfish I allocate large disk image for example: $ guestfish ><fs> allocate test.img 20G When an image allocating, there is a big slowdown of guest OSes, launched on host machine, and on different drives. For Linux guests with virtio drivers, there is no so big performance penalty, but for FreeBSD

...pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xe000-0xe00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec00-0xec1f mem 0xd8000000-0xd80fffff,0xd8100000-0xd8100fff irq 11 at device 8.0 on pci0 fxp0: Eth...

...rocessor and multi-processor platforms; it is supported for 7th-generation processors only on uni-processor platforms. STPCLK-throttling reduces the power consumption of the entire platform by dividing down the clock rate of all processor cores in all processors on the platform. The southbridge initiates a STPCLK-throttling message to all processors based on external temperature sensors, timers, or other external events that have been designed into the platform. Platform vendors typically use STPCLK-throttling as a safeguard to quickly cool a platform due to abnormal therma...

Hello, I've got an EPIA-M series motherboard in a system that has locked up twice under random conditions. Nothing is logged to the console or logs, the system just hangs. The system is installed with CentOS 4.4 and running the 2.6.9-42.0.8.EL i686 kernel. I am aware that older C3 processors had the CMOV problem, but that is resolved in the later boards (procinfo below). I've seen a