Charlie Grosvenor
2007-Jan-22 13:08 UTC
[asterisk-users] X100P how do i recieve incomming calls?
I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get: "Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured." My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with asterisk? I assume I need to make some sort of change to /etc/asterisk/zapata.conf in order to tell asterisk about the card? Thanks
Charlie Grosvenor
2007-Jan-22 15:56 UTC
[asterisk-users] X100P how do i recieve incomming calls?
Dmesg reports: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.0 Echo Canceller: MG2 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 185 wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Wildcard X100P Capability LSM initialized When I run zttool it says that alarms: red. The card is connected to the phone line. Anybody any idea what the problem is? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Charlie Grosvenor Sent: 22 January 2007 20:08 To: asterisk-users@lists.digium.com Subject: [asterisk-users] X100P how do i recieve incomming calls? I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get: "Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured." My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with asterisk? I assume I need to make some sort of change to /etc/asterisk/zapata.conf in order to tell asterisk about the card? Thanks _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<html><div style='background-color:'><DIV class=RTE> <P><FONT style="FONT-SIZE: 11px; FONT-FAMILY: tahoma,sans-serif">From: <I>"Charlie Grosvenor" <charlie@cgrosvenor.co.uk></I><BR>>I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get:<BR>><BR>...</FONT></P> <P><FONT style="FONT-SIZE: 11px; FONT-FAMILY: tahoma,sans-serif">>Channel 01: FXS Kewlstart (Default) (Slaves: 01)<BR>><BR>>1 channels configured."<BR>><BR>>My understanding of the above is that the zaptel driver has detected the<BR>>card. What do I now need to do, in order to get an incoming call to work<BR>>with asterisk?<BR>><BR>>I assume I need to make some sort of change to /etc/asterisk/zapata.conf<BR>>in order to tell asterisk about the card?<BR></P></FONT><FONT style="FONT-SIZE: 11px; FONT-FAMILY: tahoma,sans-serif"></FONT></DIV> <DIV class=RTE>You want to define a context to use with this channel, match the signaling with your channel driver (see examples in zapata.conf); if you create a new context, you'll need to also create a dial plan for it.</DIV> <DIV class=RTE> </DIV> <DIV class=RTE>Yuan Liu</DIV> <DIV class=RTE><FONT style="FONT-SIZE: 11px; FONT-FAMILY: tahoma,sans-serif"><BR>>Thanks<BR></DIV></FONT></div></html>
Tzafrir Cohen
2007-Jan-22 16:39 UTC
[asterisk-users] X100P how do i recieve incomming calls?
On Mon, Jan 22, 2007 at 08:08:16PM -0000, Charlie Grosvenor wrote:> I have just purchased a 2nd hand X100P,Is there another X100P card in the same system?> if I do a ztcfg -vv I get: > > "Zaptel Version: 1.4.0 > Echo Canceller: MG2 > Configuration > =====================> > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > 1 channels configured." > > My understanding of the above is that the zaptel driver has detected the > card. What do I now need to do, in order to get an incoming call to work > with asterisk? > > I assume I need to make some sort of change to /etc/asterisk/zapata.conf > in order to tell asterisk about the card?-- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir
Charlie Grosvenor
2007-Jan-23 01:08 UTC
[asterisk-users] X100P how do i recieve incomming calls?
There is only one x100p card in the system thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir Cohen Sent: 22 January 2007 23:40 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] X100P how do i recieve incomming calls? On Mon, Jan 22, 2007 at 08:08:16PM -0000, Charlie Grosvenor wrote:> I have just purchased a 2nd hand X100P,Is there another X100P card in the same system?> if I do a ztcfg -vv I get: > > "Zaptel Version: 1.4.0 > Echo Canceller: MG2 > Configuration > =====================> > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > 1 channels configured." > > My understanding of the above is that the zaptel driver has detectedthe> card. What do I now need to do, in order to get an incoming call towork> with asterisk? > > I assume I need to make some sort of change to/etc/asterisk/zapata.conf> in order to tell asterisk about the card?-- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users