asterisk users - Jul 2007 - Problem

i am have x100P clone, and install asterisk 1.4 and out call normaly and
hangup in xlite to zap but call to asterisk for zap channel nop pass to
xlite and the caller hangup the asterisk not detect.

what is the problem ???
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/39d4c1e8/attachment.htm

On Fri, 2007-07-20 at 15:33 -0500, Walter Willis wrote:
> i am have x100P clone, and install asterisk 1.4 and out call normaly
> and hangup in xlite to zap but call to asterisk for zap channel nop
> pass to xlite and the caller hangup the asterisk not detect.
The X100P (and it's numerous clones) don't support far-end disconnect
supervision.  This means they can't tell when the far end has hung up
the call.  I suggest you might want to try a more modern telephony card,
such as the Digium TDM400P card.  The X100P cards are just more headache
than they're worth (and have been since I started using Asterisk over 5
years ago).

-- 
Jared Smith
Community Relations Manager
Digium, Inc.

On Fri, Jul 20, 2007 at 07:45:32PM -0500, Walter Willis
wrote:
> look my zapata.conf
> 
> [channels]
> context=default
> switchtype=national
> signalling=fxs_ks
Power denial will be identified as a hangup.
> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=1.0
> txgain=1.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> busydetect=yes
> busycount=3
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
Those two are meaningless, as your cards will not send polarity reversal
events.
> polarityonanswerdelay=1
> callprogress=no
> musiconhold=default
> channel => 1,2
> 
> add to line:
> busydetect=yes
> busycount=3 but the situation is iqual
Where have you added those lines? Before the "channel" line, I hope.
> 
> have much that it is a clon x100p ???
> 
> # ztcfg -vvvvv
> 
> Zaptel Version: 1.4.4
> Echo Canceller: MG2
> Configuration
> =====================> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 
> 2 channels configured.
> 
> 
> it is in debian.
-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir