Hiya all, I have had no end of trouble trying to get my A101 E1 card working on a new asterisk installation. The sangoma tech people have ignored my emails about this. All the installation of wanpipe seems to go ok, and zaptel. it all installed compiled and does all the wanpipe hwprobe exactly as documented. Asterisk compiled ok, but when I run it give me Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10614 setup_zap: Unknown signalling method 'pri_cpe' Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10239 setup_zap: Signalling must be specified before any channels are. Am I right in thinking that's it's something to do with libpri? Mark
On 6/29/06, Mark Ackroyd <mark.ackroyd@cencion.com> wrote:> > Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10614 setup_zap: Unknown > signalling method 'pri_cpe' > Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10239 setup_zap: Signalling > must be specified before any channels are. > > Am I right in thinking that's it's something to do with libpri? >You probably did not build/install libpri before building asterisk, so it will be built without PRI support. Cheers, Steve
Benjamin J. Bawkon
2006-Jun-29 08:52 UTC
[Asterisk-Users] Sangoma card A101 Card troubles.
Yes, You are. Libpri$ make clean Libpri$ make install Zaptel$ make Zaptel$ make install Asterisk$ make Asterisk$ make install In that order. All should be well. Ben Bawkon Varion, Inc. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mark Ackroyd Sent: Thursday, June 29, 2006 5:20 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Sangoma card A101 Card troubles. Hiya all, I have had no end of trouble trying to get my A101 E1 card working on a new asterisk installation. The sangoma tech people have ignored my emails about this. All the installation of wanpipe seems to go ok, and zaptel. it all installed compiled and does all the wanpipe hwprobe exactly as documented. Asterisk compiled ok, but when I run it give me Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10614 setup_zap: Unknown signalling method 'pri_cpe' Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10239 setup_zap: Signalling must be specified before any channels are. Am I right in thinking that's it's something to do with libpri? Mark _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users