search for: hwprobe

Hiya all, I have had no end of trouble trying to get my A101 E1 card working on a new asterisk installation. The sangoma tech people have ignored my emails about this. All the installation of wanpipe seems to go ok, and zaptel. it all installed compiled and does all the wanpipe hwprobe exactly as documented. Asterisk compiled ok, but when I run it give me Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10614 setup_zap: Unknown signalling method 'pri_cpe' Jun 27 11:12:18 ERROR[10528]: chan_zap.c:10239 setup_zap: Signalling must be specified before any channels are. Am I ri...

...he past 3 weeks complaining no inbound/outbound calls can be made through PSTN. When I log in to the server if I do a "wanrouter hwprove" I only see one of the units. If I ask them to disconnect and reconnect the U100 that is flashing (which is the one that failed) and do "wanrouter hwprobe" now it shows again. So, I can do a wancfg_dahdi and it brings it up. Sometimes, I have to recompile the whole wanpipe. But more or less I think it's the USB that fails or it could also be the wanrouter itself that fails. Sangoma is closed today but maybe others from here can shed some li...

...n be found on Caldera's FTP site at: ftp://ftp.caldera.com/pub/updates/eDesktop/2.4/current/RPMS The corresponding source code package can be found at: ftp://ftp.caldera.com/pub/updates/eDesktop/2.4/current/SRPMS 6.2 Verification 1a36056ca0abe8942fa78b5358e7a613 hwprobe-20000214-5.i386.rpm a7e75d7133ee094e1c30695b58382414 iBCS-2.1-11.i386.rpm fd002d7ec09fc9acea25db34d4f440aa linux-kernel-binary-2.2.14-8.i386.rpm 6a8e1752508e78e75d5ba0cc885aeeb5 linux-kernel-doc-2.2.14-8.i386.rpm a59bbd344ce23efbca734f66b98dba9c linux-kernel-include-2.2.14-8.i386.rp...

...found on Caldera's FTP site at: ftp://ftp.caldera.com/pub/updates/eDesktop/2.4/current/RPMS The corresponding source code package can be found at: ftp://ftp.caldera.com/pub/updates/eDesktop/2.4/current/SRPMS 6.2 Verification 3274fe3fbb7b302d6d0bee7186820fef hwprobe-20000214-6.i386.rpm 064ebec44665beb14eaa85ad4ecfc838 iBCS-2.1-12.i386.rpm d87d3c6f0cb937a0e51e68c6984b2c62 iBCS-extras-2.1-12.i386.rpm 7fd4443b17bc58f072572548b3c54886 iBCS-module-2.1_2.2.14-12.i386.rpm 4366e46e2ff02f9dadde291a483f1cf2 linux-kernel-binary-2.2.14-9.i3...

...CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces. I ran through the wanpipe install instructions and configured it, now I can run [root@altpbx asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A101u : SLOT=1 : BUS=1 : IRQ=209 : CPU=A : PORT=PRI Card Cnt: S508=0 S514X=0 S518=0 A101-2=1 A104=0 A300=0 So I know the card is there OK. My /etc/zaptel.conf looks like: span=1,1,0,es...

...Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:4383 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:177 Memory:f8c50000-f8c51fff root at pbx:~ $ wanrouter hwprobe verbose ----------------------------------------- | Wanpipe Hardware Probe Info (verbose) | ----------------------------------------- 1 . AFT-A101-SH : SLOT=4 : BUS=4 : IRQ=9 : CPU=A : PORT=1 : HWEC=32 : V=36 +01:DS26521: PCIe: PLX2 Card Cnt: A101-2=1 root at pbx:~ $ wanrouter status Devices cu...

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Hi Guys, Running the following with a Sangoma A101D PRI card: *Asterisk 1.4.21.2* *LibPRI version: 1.4.10* No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show any activity. Problem goes away on restart of the system or maybe asterisk. I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even that didn't work. Anyone can weigh in this please?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This seems to be an old problem, but I haven't found much about it. SuSE mentions "hwprobe=-pci" but, as far as I know, CentOS doesn't use it. This does stop the machine from booting (mounting /) quite a few times. Logs: SCSI subsystem initialized sym0: <895> rev 0x2 at pci 0000:00:13.0 irq 177 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ...

hi group , i am working on dahdi_monitor for measuring voice quality , so i want to know that on which data i can tell that this PRI lines are working properly, is there any measurement on basis of that i can make MOS. i am working from last 2-3 days but i only get idea about making .raw file and making .wav file and visulal mode of RX and TX of PRI line. what i want is measurement of voice

...sterisk 1.8 and i didn't found dahdi command in CLI everything seem fine. am i missing something ? campbx2*CLI> dahdi <tab tab> No such command 'dahdi' (type 'core show help dahdi' for other possible commands) campbx2*CLI> root at campbx1:/etc/wanpipe# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A102-SH : SLOT=2 : BUS=7 : IRQ=3 : CPU=A : PORT=1 : HWEC=64 : V=37 2 . AFT-A102-SH : SLOT=2 : BUS=7 : IRQ=3 : CPU=A : PORT=2 : HWEC=64 : V=37 Card Cnt: A101-2=1 root at campbx2:/etc/asterisk...

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device