Philippe Lindheimer
2006-Jun-22 20:13 UTC
Subject: [Asterisk-Users] Passing DID to external number?
For the DID's the easiest way for you to trasmit the incoming DID is to create custom extensions for the external numbers that access the external trunk directly. (e.g. they should NOT go to Loca/xxxx. or it will not retain the orignal CID in freepbx- which is effectively how it is being sent when you put xxxxx# in the ring list). As far as why it is only ringing one of your external numbers, I can only guess (with the limited information) that you may only have a single outbound channel available on your trunk so the second number is getting rejected? (Look in the log and see if it tells you that or if not provides additonal clues). p From: "Brian McCarey" <brian_mccarey@hotmail.com> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com> Date: Thu, 22 Jun 2006 18:40:25 +0100 Subject: [Asterisk-Users] Passing DID to external number? Hi, We run a small switchboard using Asterisk and Free PBX. We have two main extensions and two ring groups. The first ring group rings the two internal extensions. If the internal extensions do not pick up the call after 15 seconds then the second ring group kicks in which should ring the two internal extensions plus two external numbers. Firstly, how do I pass the DID number of an incoming call to the external number so that the external number sees the incoming number and not the voip dial out number? Secondly, when the second ring group kicks in only one of the external numbers dials when both internal extensions and both external numbers should ring according to the ring group setting. Any ideals what's going wrong? Kind regards Brian. UK --------------------------------- How low will we go? Check out Yahoo! Messenger?s low PC-to-Phone call rates. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060622/3baf9002/attachment.htm