Hi, We run a small switchboard using Asterisk and Free PBX. We have two main extensions and two ring groups. The first ring group rings the two internal extensions. If the internal extensions do not pick up the call after 15 seconds then the second ring group kicks in which should ring the two internal extensions plus two external numbers. Firstly, how do I pass the DID number of an incoming call to the external number so that the external number sees the incoming number and not the voip dial out number? Secondly, when the second ring group kicks in only one of the external numbers dials when both internal extensions and both external numbers should ring according to the ring group setting. Any ideals what's going wrong? Kind regards Brian. UK -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060622/785d1c9e/attachment.htm
How can I get the external caller id to show on the polycom 501 phones. Currently, when someone calls our office, we only see the word "asterisk" in the caller id. This is our set up: VOIP(polycom)<--------------->Asterisk 1.2.4<--------------->PSTN Thanks --------------------------------- Yahoo! Groups gets better. Check out the new email design. Plus there?s much more to come. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060622/a6c34524/attachment.htm
Do you have the Caller ID feature with your telephone service package? sdgesa gaeharth wrote:> How can I get the external caller id to show on the polycom 501 > phones. Currently, when someone calls our office, we only see the word > "asterisk" in the caller id. > > This is our set up: > > VOIP(polycom)<--------------->Asterisk 1.2.4<--------------->PSTN > > Thanks > > ------------------------------------------------------------------------ > Yahoo! Groups gets better. Check out the new email design. > <http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=41142/*http://groups.yahoo.com/local/newemail.html> > Plus there?s much more to come. > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Joshua West Linux Infrastructure Engineer Boston Engineering Corporation http://www.boston-engineering.com
Hi, We run a small switchboard using Asterisk and Free PBX. We have two main extensions and two ring groups. The first ring group rings the two internal extensions. If the internal extensions do not pick up the call after 15 seconds then the second ring group kicks in which should ring the two internal extensions plus two external numbers. Firstly, how do I pass the DID number of an incoming call to the external number so that the external number sees the incoming number and not the voip dial out number? Secondly, when the second ring group kicks in only one of the external numbers dials when both internal extensions and both external numbers should ring according to the ring group setting. Any ideals what's going wrong? Kind regards Brian. UK -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060623/11d921de/attachment.htm
Philippe Lindheimer
2006-Jun-23 08:44 UTC
[Asterisk-Users] Passing DID to external number?
You already posted this. I answered it yesterday also?
p
From: "Brian McCarey" <brian_mccarey@hotmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
<asterisk-users@lists.digium.com>
Date: Fri, 23 Jun 2006 10:27:19 +0100
Subject: [Asterisk-Users] Passing DID to external number?
Hi,
We run a small switchboard using Asterisk and Free PBX.
We have two main extensions and two ring groups. The first ring group rings
the two internal extensions. If the internal extensions do not pick up the call
after 15 seconds then the second ring group kicks in which should ring the two
internal extensions plus two external numbers.
Firstly, how do I pass the DID number of an incoming call to the external
number so that the external number sees the incoming number and not the voip
dial out number?
Secondly, when the second ring group kicks in only one of the external numbers
dials when both internal extensions and both external numbers should ring
according to the ring group setting. Any ideals what's going wrong?
Kind regards
Brian. UK
---------------------------------
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail Beta.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060623/6485d929/attachment.htm