I just bought an TDM400P card with one FXS port and a X101P FXO card to try and put together the beginnings of a PBX here. The computer they are going in should arrive in a week. So I thought I would start learning how to config the card in an IBM Aptiva we have here, an old 400Mhz P2 box. However when I put the TDM400P in the box the machine won't POST. Does this mean that the card is bad or that the machine can't handle this new PCI hardware? If it matters the cards were purchased online at voipdepot.ca just this week and arrived this morning. Mike
Take a look on the Digium site for the requirements of the card. Most likely the old computer can't handle the card. M.Hockings wrote:> I just bought an TDM400P card with one FXS port and a X101P FXO card > to try and put together the beginnings of a PBX here. The computer > they are going in should arrive in a week. So I thought I would start > learning how to config the card in an IBM Aptiva we have here, an old > 400Mhz P2 box. However when I put the TDM400P in the box the machine > won't POST. Does this mean that the card is bad or that the machine > can't handle this new PCI hardware? > > If it matters the cards were purchased online at voipdepot.ca just > this week and arrived this morning. > > Mike > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >