Displaying 20 results from an estimated 549 matches for "devsel".
Did you mean:
devel
2005 Jun 06
5
IRQ Problems
...C-edge keyboard
2: 0 XT-PIC cascade
8: 3 IO-APIC-edge rtc
14: 2 IO-APIC-edge ide0
15: 505440 IO-APIC-edge ide1
21: 150019 IO-APIC-level eth1
22: 63326503 IO-APIC-level t1xxp
-- lspci -bv | grep IRQ
Flags: bus master, medium devsel, latency 0, IRQ 11
Flags: bus master, medium devsel, latency 0, IRQ 10 (USB)
Flags: bus master, fast devsel, latency 0, IRQ 255
Flags: bus master, medium devsel, latency 0, IRQ 7
Flags: medium devsel, IRQ 5
Flags: bus master, 66Mhz, medium devsel, latency 0,...
2006 Apr 04
2
Fax over 2 bridged TE110P channels
...XT-PIC acpi
10: 2531734 XT-PIC eth0
12: 1114121836 XT-PIC t1xxp
14: 306435 XT-PIC ide0
NMI: 0
lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host & Memory &
AGP Controller (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus:...
2008 Apr 08
0
hw question: asus dsbf-de sata ports?
...B Gigabit
Ethernet Controller (rev 06)
0c:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
# lspci -v
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller
Hub (rev b1)
Subsystem: ASUSTeK Computer Inc. Unknown device 81db
Flags: bus master, fast devsel, latency 0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit-
Queue=0/1 Enable-
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express
x8 Port 2-3 (rev b1) (...
2010 Sep 11
0
AHCI and VT-d related problem
...failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
The output of lspci -v from the working Arch Linux system:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: fast devsel
Capabilities: [40] #00 [0000]
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root
Port 1 (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0...
2008 Sep 20
1
kernel message - disabling irq #50
...0MB/s according to
vmstat 1 comand, but with irqpoll the maximum i noticed was like
10MB/s.
here is ouput from lspci -v :
> 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
> Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
> Flags: bus master, 66MHz, fast devsel, latency 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Capabilities: [dc] HyperTransport: MSI Mapping
>
> 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
> Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
> Flags: bus master, 66MHz,...
2008 Oct 22
2
SCSI error: return code = 0x10070000
....For the matter the drive gets mounted under fedora 9 - but i want
to use it with CentOS.
here is my lspci -v
> 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
> Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
> Flags: bus master, 66MHz, fast devsel, latency 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Capabilities: [dc] HyperTransport: MSI Mapping
>
> 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
> Subsystem: ASUSTeK Computer Inc. Unknown device 82b3
>...
2011 Nov 07
2
[Bug 42672] New: NMI SERR with 2 Geforce 310 cards
...sults:
Additional info:
lspci -vvv:
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub
Subsystem: Hewlett-Packard Company Device 280c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: i82975x_edac
Kernel modules: i82975x_edac
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (prog-if 00
[Normal decode])
Control: I/O+ Mem+...
2010 Nov 03
5
wow.exe Wont Run in Wine 1.2.1
...irectory, but no change.
And here's some more specs if they help any:
Dell Latitude D610
Ubuntu 10.10
Code:
lspci -v :
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
Subsystem: Dell Dell Latidude C610
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0...
2008 Feb 25
1
DTMF tone crashes server (Asterisk 1.4.18 with Digium TE120P)
...9061 0 IO-APIC-level wcte12x[p]
NMI: 0 0
LOC: 294996 294975
ERR: 0
MIS: 0
# lspci -v
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub
(rev 02)
Subsystem: IBM Unknown device 02ad
Flags: bus master, fast devsel, latency 0
Memory at d2000000 (32-bit, prefetchable) [size=32M]
Capabilities: [e4] Vendor Specific Information
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA
Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, late...
2006 May 18
3
Centos 4.3 and Card Reader
CentOS 4.3 (fully updated, including CentOS Plus kernel).
Running KDE 3.5.2 (fully updated from redhat.kde repo).
I can't seem to get the OS to recognize my SD card when inserted into my USB
card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing
happening when the card is inserted. USB-STORAGE module is loaded.
2005 Aug 04
1
HELP! X100P IRQ conflict w/ USB
...i -vvv
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Contr)
Subsystem: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controlb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Ste-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort--
Latency: 0
Capabilities: [88] #09 [f104]
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Cont)
Subsystem: Hewlett-Packard Company: Unknown device 1245
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop...
2011 Dec 27
0
[Kernel 3.1.5] [OCFS2] After many write/delete on ocfs2 both servers in cluster kernel oops
...spci -vvv
> 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 22)
> Subsystem: IBM Device 7270
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 11
> Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
> Address: 00000020 Data: 0000
> Masking: 00000000 Pending: 00000000
>...
2016 Apr 18
2
GM108GLM?
Is there anything I can do in this regard?
/smo
On 2016-03-31 23:12, Pierre Moreau wrote:
> Oh, hum, GM108 is NV118 and not NV108 which is Gk208… My bad!
>
> SMF from the bug report seemed to have some working setup, and since he didn't
> pinged back, I guess it's working nicely. But some more checking might still be
> needed?
>
> On 04:59 PM - Mar 31 2016, Ilia
2007 May 14
0
quadbri and bristuff : no answer to isdn setup message
...EACTIVATED (G2)" AMI/CCS
10 ztqoz2/4/1 Clear (In use)
11 ztqoz2/4/2 Clear (In use)
12 ztqoz2/4/3 HDLCFCS (In use)
Lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
Subsystem: Dell Unknown device 019d
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Dell Dimension 3000
Flags: fast devsel, IRQ 20
Memo...
2007 Nov 30
4
[PATCH 0/4] [AMD IOMMU] Enable PCI passthru for HVM guest
Hi,
The following 4 patches enable direct device assignment (PCI passthru)
for HVM guest
on AMD IOMMU platforms. Please apply them against C/S 16491 as the named
order.
To enable AMD IOMMU, please add "enable_amd_iommu" as xen boot
parameter.
1-cleanup.patch: code cleanup, bug fix, minor enhancements to existing
amd-iommu codes.
2-passthru-amd.patch: passthru support, modifications to
2013 Mar 28
6
Does CentOS support dual graphics cards with 2 monitors each?
...-v output below, but
I can't get Xorg to use the second card. Has anyone done this? If so, what is the trick to
get it to work?
Alfred
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04ad
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subord...
2005 Jan 26
3
phone rings when I'm using it over VOIP - WHY?
When I use my phone to make VOIP call and another calls comes from POTS
my phone rings to POTS caller. Why?
Shouldn't it generate busy signal!
--
#Joseph
2010 Apr 11
7
dom0 crash, require assistance interpretting logs and config suggestions
...el: [277248.765416] RAID1 conf printout:
Apr 11 04:24:44 xenserver kernel: [277248.765431] --- wd:1 rd:2
From lspci -v:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:01.0 PC...
2013 Jul 14
1
Cannot VGA Passthrough Intel HD Graphics 4600 IGD
...0-desktop:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
Subsystem: ASRock Incorporation Device 0c00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller
(rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASno...
2009 Jan 26
7
Auto Detect
Which command to run which will auto detect all hardwares present in the
system ?
OS : CentOS
Running Asterisk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm