Hey all, posted this the other day, but re-read it & realized I didn't
give enough info to be useful.. so I thought I'd try again.. I'm using
AAH 2.0 (* 1.2.0) and am unable to transfer a call when I initiate the outgoing
call. In AMPs general settings, I've tried changing the Dial command using
tT but transfers are only available when I'm the recipient of the call, not
when I'm the originator. I've tried all possible combos of t T and still
get the same behaviour, unable to transfer a call I placed.. any leads would be
greatly appreciated. Tons of Thanks in advance. Here's some info from my
zapata.conf:
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
;T1
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
language=en
context=from-pstn
signalling=em_w
rxwink=300 ; Atlas seems to use long (250ms) winks
group=12
channel=>1-24
;channel bank
;
;FXO channel bank channels
signalling=fxs_gs
group=0
rxgain=2.0 ;4
txgain=10.0 ;-2 what you say
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
channel=>37-48
;
;FXS Channels at the end of doc
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
jitterbuffers=32
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
echotraining=800
;rxgain=24.0 ;4
;txgain=0.0 ;-2 what you say
group=0
callgroup=1
pickupgroup=1
immediate=no
faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;FXS Channels
context=from-internal
signalling=fxo_ks
rxgain=0.0
txgain=0.0
group=60
;adsi=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
channel=>25-36
context=from-internal
signalling=fxo_ks
rxgain=0.0
txgain=0.0
group=60
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ; allows flash transfers
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
;adsi=yes
channel=>49-144
;Inclue genzaptelconf configs
#include zapata-auto.conf
;Include AMP configs
#include zapata_additional.conf
