search for: cancallforward

...extensions.conf Thanks Daniel. ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 192.168.11.20 disallow=all allow=g729 allow=alaw allow=ulaw [192.168.11.200] context=MGCP host=192.168.11.200 wcardep=aaln/* callerid = "test" <8000100> callwaiting=no transfer=no cancallforward=no dtmfmode=rfc2833 canreinvite=no singlepath=no slowsequence=yes line => aaln/1 callerid= "test" <8000101> callwaiting=no transfer=no cancallforward=no canreinvite=yes dtmfmode=rfc2833 line => aaln/2 callerid= "test" <8000102> callwaiting=no transfer=no cancal...

...nsfer a call I placed.. any leads would be greatly appreciated. Tons of Thanks in advance. Here's some info from my zapata.conf: ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] ;T1 callwaitingcallerid=yes threewaycalling=yes transfer=yes ; allows flash transfers cancallforward=yes language=en context=from-pstn signalling=em_w rxwink=300 ; Atlas seems to use long (250ms) winks group=12 channel=>1-24 ;channel bank ; ;FXO channel bank channels signalling=fxs_gs group=0 rxgain=2.0 ;4 txgain=10.0 ;-2 what you say callwaitingcallerid=yes threewaycalling=yes tr...

...lay "Asterisk" as the cid name, nothing for number. Here's what I have in my mgcp.conf for the device: [2084728800103] host = dynamic context = westcomllc line => aaln/1 callerid = "Jeremy Jones" <103> nat = no transfer = yes callwaiting = yes threewaycalling = yes cancallforward = yes mailbox = 103@westcomllc When placing outbound calls (out our pstn gateway), I always replace cid name/number w/the main number & name of the company, so that direction it's not an issue -- just internal calls. Anyone seen this & have ideas about what to do with it? Thanks, J...

...w do I make asterisk recognize when the phone is ringing? Thanks in advance lane ;zaptel.conf fxsks=4 fxoks=1 loadzone = us defaultzone=us ; ;zapata.conf [channels] language=en rxwink=300 usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=yes usecallingpres=yes threewaycalling=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no signalling => fxo_ks channel => 1 signalling => fxs_ks channel => 4 ; extensions.conf [globals] CONSOLE=Zap/1 TRUNK=Zap/4 TRUNKMSD=1 [trunklocal] exten => _9NXXX...

...ld it be something about timing of ABCD bits? I'm using: Asterisk 1.2.6 Zaptel 1.2.5 libmfcr2 0.0.3 libunicall 0.0.3 libsupertone 0.0.2 spandsp-0.0.3 And this is my unicall.conf: [channels] loglevel=1023 usecallerid=yes hidecallerid=no callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callerid=asreceived callreturn=yes echocancel=no echocancelwhenbridged=no echotraining=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no musiconhold=default protocolclass=mfcr2 protocolvariant=ar,10,4,15 protocolend=cpe group=1 context=from-zaptel channel => 1-15 channel =>...

Hi, I want to know how I can get a value from a table. Say, I have a table sip_buddies for storing sip user account information. There is a field called 'accountcode' that I want to get its value in the dial plan. As I find that there is no direct way to get the value from the table. Does anyone can tell me how can I get its value in the dial plan? Thanks!

...rid=yes echocancel=yes echocancelwhenbridged=yes ;signalling=fxs_ls;<=== loop start ;signalling=fxs_gs;<=== ground start signalling=fxs_ks;<=== kewl start ;immediate=yes context=x100p1 usedistinctiveringdetection=yes callwaitingcallerid=yes callwaiting=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes channel => 1 ;++++++++++ x100p1 ;++++++++++++ x100p2 language=es usecallerid=yes echocancel=yes echocancelwhenbridged=yes ;signalling=fxs_ls ;signalling=fxs_gs signalling=fxs_ks ;immediate=yes context=x100p2 usedistinctiveringdetection=yes callwaiting=yes callwaitingcalleri...

...lot to work with. The buzzing happens on calls that are routed over both my FXO line and IAX to NuFone, so I'm pretty sure that it's happening on the FXS end. Here's that chunk of zapata.conf: context=inside-analog signalling=fxo_ks callwaiting=yes callwaitingcallerid=yes cancallforward=yes callreturn=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=0 immediate=no musiconhold=yes usecallerid=yes callerid="Analog Phone" <2201> mailbox=2201 channel => 2 Does anyone have any s...

...decallerid=yes ;hidecalleridname=yes ;waitfordialtone=yes ;mwimonitor=no ;mwilevel=512 ;mwimonitornotify=/usr/local/bin/dahdinotify.sh ;mwisendtype=rpas,lrev callwaiting=yes ;restrictcid=no usecallingpres=yes sendcalleridafter = 1 callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=no group=1 callgroup=1 pickupgroup=1 ;immediate=yes immediate=no callerid = asreceived useincomingcalleridondahditransfer = yes callprogress=yes progzone=us faxdetect=both ;faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no...

...39;ve encountered this and what solutions you've devised. zapata.conf [trunkgroups] [channels] language=en group=1 context=from-pbx signalling=em_w relaxdtmf=yes usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=no callwaitingcallerid=no threewaycalling=no transfer=no canpark=no cancallforward=no callreturn=no echocancel=no echocancelwhenbridged=no busydetect=yes rxgain=5.0 txgain=5.0 callgroup=1 pickupgroup=1 immediate=no channel => 1-24 [zaptel.conf] span=1,1,0,esf,b8zs e&m=1-24 -- Anthony D Cennami -------------- next part -------------- An HTML attachment was scrubbed... UR...

...two Astribank-8 units and everyone claims that their calls are dropped several times a day. Any suggestions? Here is my zapata.conf: language=es context=default ;rwink=300 usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echotraining=yes ;echocancelwhenbridged=yes rxgain=-1.0 txgain=0.0 busydetect=yes callprogress=no accountcode=Telmex amaflags=default signalling=fxs_ls group=1 faxdetect=none callerid=asreceived channel => 1-6 -- Telecomunicaciones Abiertas de Mexico S.A. de C...

...st=192.168.0.241 wcardep=* line => * ; ; Line 1 ; callerid = "John" <123> callgroup=0 pickupgroup=0 nat=no threewaycalling=yes transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer callwaiting=yes ; this might be a cause of trouble for ip10s cancallforward=yes line => aaln/1 ; ; Line 2 ; callerid = "Jane" <124> callgroup=0 pickupgroup=0 nat=no threewaycalling=yes transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer callwaiting=yes ; this might be a cause of trouble for ip10s cancallforward=y...

...my zaptel.conf fxsks=1 loadzone = es defaultzone = es and my zapata.conf [channels] language=es context=incoming switchtype=national signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=no rxgain=8.0 txgain=5.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes hanguponpolarityswitch=no faxdetect=incoming channel => 1

...language=en ; include zap extensions defined in AMP #include zapata_additional.conf ; TDM Port #3,4 plugged into PSTN ;AMPLABEL:Zap Channel %c context=from-zaptel signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=yes rxgain=0.0 txgain=0.0 immediate=no busydetect=yes busycount=4 ;busypattern=500,500 ;answeronpolarityswitch=yes ;hanguponpolarityswitch=yes ;callprogress=yes ;progzone=us channel => 3-4 __________________________________...

...number (A-number). Here is an from zapata.conf: [channels] language=se context=from-pstn switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=400 rxgain=1.0 txgain=-4.0 group=0 callgroup=1 pickupgroup=1 immediate=no overlapdial=no channel => 1-15,17-31,63-77,79-93 group=1 channel => 94-108,110-124 group=2 context=from-internal signalling=pri_net channel =>...

...---------------------------------------------------------------- ; Zapata telephony interface ; ; Configuration file [channels] ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=-100.0 txgain=-50.0 callgroup=1 pickupgroup=1 immediate=no musiconhold=default signalling=fxs_ks context=incoming group=1 channel=1-2 ;X100P signalling=fxo_ks context=outgoing group=2 channel=3-4 ;TDM10B -----------------...

...defaultzone=us channels=1-23 And my entries in zapata.conf are: language=en context=telco-incoming switchtype=5ess signalling=pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no group = 1 switchtype = 5ess signalling = pri_cpe group = 1 channel => 1-23 I'm not able to make/receive calls, and the error I'm receiving is: [Jun 10...

..., 63-77, 79-93, 94-108, 110-124 dchan=16, 47, 78, 109 loadzone=it defaultzone=it zapata.conf [channels] ; ; GROUP 1 switchtype=EuroISDN overlapdial=yes usecallerid=yes pridialplan=UnKnown hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no ; group = 1 context=in switchtype=EuroISDN signalling=pri_cpe pridialplan=UnKnown echocancel=yes channel => 1-15, 17-31, 63-77, 79-93 ; ; GROUP 2 - ; switchtype=EuroISDN use...

...l,b703 ... [zap-in] exten => s,1,NoOp(Starting Zap-in) include => office ====================================================================== zapata.conf [channels] usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes context=zap-in group=1 signalling=fxo_ks faxdetect=incoming channel => 1-12 Chris Mason US Number: (646)722-0001 US Fax (815)301-9759 Skype: netconcepts

...pata.conf [trunkgroups] trunkgroup => 1,16 spanmap => 1,1 [channels] language=en context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe ;rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=5.0 txgain=1.0 echotraining=yes group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1-15,17-31 -- Arnar Gestsson <age@trackwell.com>