search for: fxo_k

...----- | Asterisk | | | | 2 T1 Cards | | | | | | | -------------- With this setup what should the zaptel & zapata configs look like..... zaptel.conf - span=1,0,0,esf,b8zs E&M=1-24 (I am going to be doing DID/DOD Lines) zapata.conf - signalling=fxo_ks context=blah group=1 channel => 1-24 Here is where my confusion comes in. Under Zaptel.conf it appears that you are just configuring the first card. If this is so, do you not need to configure the second card with any type of signaling? Then on the channel bank what type of signaling is co...

...nguage=be callerid=asreceived immediate=no switchtype=euroisdn ; ; Port 1-2 to PBX ; context=isdn-pbx signalling=bri_net group=2 channel => 1-2,4-5 echocancel = yes ; ; Port 3-4 to Telco ; context=isdn-public signalling = bri_cpe group=1 channel => 7-8,10-11 ; ; TDM40B kanalen ; signalling=fxo_ks language=be context=analog channel => 13 signalling=fxo_ks language=be context=analog channel => 14 signalling=fxo_ks language=be context=analog channel => 15 signalling=fxo_ks language=be context=analog channel => 16 part of extensions.conf, relevant for calls from PBX to Telco [...

...aultzone=es usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes inmediate=no ; DGB - 20100322 busydetect=yes busycount=3 ;Sangoma AFT-A200 [slot:8 bus:1 span:1] <wanpipe1> context=from-internal group=1 echocancel=yes signalling = fxo_ks channel => 1 mailbox=300 at voicemail callerid="Jane Doe" <300> context=from-internal group=1 echocancel=yes signalling = fxo_ks channel => 2 context=from-zaptel group=0 echocancel=yes signalling = fxs_ks channel => 3 context=from-zaptel group=0 echocancel=yes signallin...

...erid=asreceived echocancel=512 echocancelwhenbridged=yes echotraining=800 group=0 context=from-dahdi faxbuffers => 12,half faxdetect=incoming ;;rxgain=5.0 ;;txgain=0.0 channel => 3 ; Span 2: WCTDM/4 "Wildcard TDM400P REV I Board 5" ;;; line="5 WCTDM/4/0 FXOKS" signalling=fxo_ks callerid="Channel 5" <4025> mailbox=4025 echocancel=512 echocancelwhenbridged=yes echotraining=800 group=5 context=from-internal channel => 5 ;;; line="6 WCTDM/4/1 FXOKS" signalling=fxo_ks callerid="Channel 6" <4026> mailbox=4026 echocancel=512 echocan...

...my config but I don't see what the issue is. Is there anything I am missing, or can you suggest some additional things to look at? Tim chan_dahdi.conf grep -v "^;" /etc/asterisk/chan_dahdi.conf | grep -v "^$" [trunkgroups] [channels] language=en context=phones signalling=fxo_ks usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=no echocancelwhenbridged=no group=1 callgroup=1 pickupgroup=1 dahdi-channels.conf: ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F...

...;;;; /etc/asterisk/zapata.conf [channels] relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 immediate=no context=bell signalling=fxs_ks channel=1-4 signalling=fxo_ks callerid="Anolag 1"<801> channel=5 signalling=fxo_ks callerid="Anolag 2"<802> channel=6 signalling=fxo_ks callerid="Anolag 3"<803> channel=7 signalling=fxo_ks callerid="Anolag 4"<804> channel=8 ;;;;;;;;;;;;;; extensions.conf exten =...

Hi All, Which is the best signalling to use when connecting an FXS inteface on a TDM400 to a standard telephone. I see that all examples use fxo_ks, but it is my understanding that kewl start is really designed for connections to the CO so that hangup etc. can be detected. So does it make any sense to configure a telephone for fxo_ks? Or should it be configured for fxo_ls? Regards Garry Taylor

...OKS (In use) 15 WCTDM/0/2 FXOKS (In use) 16 WCTDM/0/3 FXOKS (In use) Part of /etc/asterisk/zapata.conf: [channels] ; Default language language=be callerid=asreceived immediate=no switchtype=euroisdn <cut the ISDN (bristuff) part of it..> ; ; TDM40B kanalen ; signalling=fxo_ks language=be context=analog echocancel=no channel => 13 signalling=fxo_ks language=be context=analog echocancel=no channel => 14 signalling=fxo_ks language=be context=analog echocancel=no channel => 15 signalling=fxo_ks language=be context=analog echocancel=no channel => 16 # Part...

...a clear channel to a recorder which starts recording certain message. Currently the channel which is created by zaptel requires the other end to answer the call, and the recorded can't answer, so the channel get hung up after a certain number of rings. Zaptel hardware is a Rhino R4T1 card with fxo_ks signalling, esf framing and b8zs encoding. zapata.conf settings are as follows: [channels] group = 0,11 context = zaptel signalling = fxo_ks channel => 1-24 group = context = default Any help would be highly appreciated. -- Zeeshan A Zakaria -------------- next part -------------- An HTML a...

I've got a single TDM 400P board with two internal ports and 1 external. chan_dahdi.conf: context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks not auto Use FXO signalling for FXS group=0 channel => 1 ; Telephone attached to port 1 channel => 2 ; Telephone attached to port 2 context=incoming-pstn-line ; Incoming calls go to [incoming-pstn-line] signalling=fxs_ks ; fxs_ks not auto Use FXS signall...

...All modifications to ; ; this file must be done via the web gui. There are alternative files to make ; ; custom modifications, details at: http://freepbx.org/configuration_files ; ;--------------------------------------------------------------------------------; ; ;;;;;;[5020] signalling=fxo_ks pickupgroup= mailbox=5020 at device immediate=no echotraining=800 echocancelwhenbridged=no echocancel=yes context=from-internal callprogress=no callgroup= callerid=device <5020> busydetect=no busycount=7 accountcode=5020 channel=>131 ;;;;;;[5021] signalling=fxo_ks pickupgroup= mailbox=50...

...O Kewlstart signalling May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring signalling -- Reconfigured channel 3, FXS Kewlstart signalling -- Reconfigured channel 4, FXS Kewlstart signalling Here is my config /etc/asterisk/zapata.conf [channels] context=internal signalling=fxo_ks rxgain=0 txgain=20 channel => 1 context=analog2 signalling=fxo_ks rxgain=0 txgain=0 channel => 2 context=pstn signalling=fxs_ks faxdetect=incoming echotraining=800 echocancel=128 echocancelwhenbridged=yes relaxdtmf=yes rxgain=10 txgain=0 immediate=no busydetect=no callprogress=no musiconho...

...he first ("normal") call. Any idea is welcome. Thanks! AF. -- *zapata.conf* usecallerid=yes usecallingpres=yes callerid=asreceived hidecallerid=no callwaiting=yes callwaitingcallerid=yes treewaycalling=yes transfer=yes useincomingcalleridonzaptransfer=yes ... context=home signalling=fxo_ks channel => 1 context=office signalling=fxo_ks channel => 2 context=freebox signalling=fxs_ks callerid=asreceived channel => 3 context=francetelecom signalling=fxs_ks callerid=asreceived channel => 4 *extensions.conf* exten => s,1,Dial(${HOME},,otw)

...(ast_load_resource): chan_zap.so: load_module failed, returning -1 WARNING[8192]: File loader.c, Line 368 (load_modules): Loading module chan_zap.so failed! this is my /etc/zaptel.conf fxoks = 1 #X101P fxsks =2 #S400P zapata.conf signalling = fxs_ks context =incoming channel=1 signalling =fxo_ks context= internal channel2 extensions.conf [incoming] exten=>s,1,Dial,Zap/1|20 [outgoing] exten => 125,1,Dial,Zap/2|20 [internal] include=incoming include=outgoing i am running this on RH8.0. Someone Please assist. -- Olaifa Augustine General Data Engineering Services Ltd

...4) 4 channels to configure. # cat /etc/zaptel.conf fxsks=4 fxoks=1,2,3 loadzone=au defaultzone=au /etc/asterisk/zapata.conf ======================== # grep -v '^ *;' /etc/asterisk/zapata.conf | grep -v '^$' [trunkgroups] [channels] context=default switchtype=national signalling=fxo_ks rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callg...

...uld figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ; Telephone attached to port 1 dahdichan => 2 ; Telephone attached to port 2 [pstn] context=incoming-pstn-line ; Incoming calls go to [incoming-pstn-line] in extensions.conf signalling=fxs_ks ; fxs_ks U...

...ngcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A400 [slot:4 bus:16 span:1] context=from-internal group=1 signalling = fxo_ks channel => 1 context=from-internal group=1 signalling = fxo_ks channel => 2 context=from-zaptel group=0 signalling = fxs_ks channel => 3 context=from-zaptel group=0 signalling = fxs_ks channel => 4 context=from-zaptel group=0 signalling = fxs_ks channel => 5 context=from-zaptel...

Hello All !!! I have 4 PSTN lines in the PBX server 1,2,3,4. First line will be used by only one extension (i.e. for the boss) for incoming and outgoing. This line is dedicated for him only.( The remaining lines will be shared by the employees 1) Group A have access to lines 2 , 3 & 4. 2) Group B have access to lines 3 & 4 3) Group C have access to line 4

I have just received a T100P and an Adtran TSU 600 in the mail. I seem to be having a problem with the T100P card. So far I have done the following: vi zaptel.conf fxoks=1-22 fxsks=23-24 ... vi zapata.conf ... signalling=fxo_ks ... channel => 1-22 ... signalling=fxs_ks ... channel => 23-24 I then run modprobe zaptel modprobe wct1xxp ztcfg -vv There are no errors to report. In /proc/zaptel/1 all of the configured channels are listed. However, I do not have an LED lit up on the T100P. To me, it makes sense that...

...Kewlstart (Default) (Slaves: 14) Channel 15: FXS Kewlstart (Default) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Slaves: 16) 16 channels configured. zaptel.conf fxoks=1-4 fxsks=5-16 defaultzone=us loadzone=us zapata.conf [channels] signalling=fxo_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes context=outstation channel=> 1-4 signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes usecallerid=yes group=2 context=incomingpstn channel=> 5-16 Best regards, Duan...