Displaying 20 results from an estimated 282 matches for "fxo_ks".
2003 Nov 20
4
T1 / Channel Bank Configuration
...-----
| Asterisk |
| |
| 2 T1 Cards |
| |
| |
| |
--------------
With this setup what should the zaptel & zapata configs look like.....
zaptel.conf -
span=1,0,0,esf,b8zs
E&M=1-24 (I am going to be doing DID/DOD Lines)
zapata.conf -
signalling=fxo_ks
context=blah
group=1
channel => 1-24
Here is where my confusion comes in. Under Zaptel.conf it appears that
you are just configuring the first card. If this is so, do you not need
to configure the second card with any type of signaling? Then on the
channel bank what type of signaling is con...
2005 Sep 12
1
chan_zap.c:8050 pri_dchannel: Ring requested on unconfigured channel 255/255 span 2
...nguage=be
callerid=asreceived
immediate=no
switchtype=euroisdn
;
; Port 1-2 to PBX
;
context=isdn-pbx
signalling=bri_net
group=2
channel => 1-2,4-5
echocancel = yes
;
; Port 3-4 to Telco
;
context=isdn-public
signalling = bri_cpe
group=1
channel => 7-8,10-11
;
; TDM40B kanalen
;
signalling=fxo_ks
language=be
context=analog
channel => 13
signalling=fxo_ks
language=be
context=analog
channel => 14
signalling=fxo_ks
language=be
context=analog
channel => 15
signalling=fxo_ks
language=be
context=analog
channel => 16
part of extensions.conf, relevant for calls from PBX to Telco
[i...
2010 May 18
1
Callerid with DAHDI
...aultzone=es
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
inmediate=no
; DGB - 20100322
busydetect=yes
busycount=3
;Sangoma AFT-A200 [slot:8 bus:1 span:1] <wanpipe1>
context=from-internal
group=1
echocancel=yes
signalling = fxo_ks
channel => 1
mailbox=300 at voicemail
callerid="Jane Doe" <300>
context=from-internal
group=1
echocancel=yes
signalling = fxo_ks
channel => 2
context=from-zaptel
group=0
echocancel=yes
signalling = fxs_ks
channel => 3
context=from-zaptel
group=0
echocancel=yes
signalling...
2011 Apr 07
0
Asterisk 1.8.x Skips DTMF Digits on a First DAHDI Initiated Call
...erid=asreceived
echocancel=512
echocancelwhenbridged=yes
echotraining=800
group=0
context=from-dahdi
faxbuffers => 12,half
faxdetect=incoming
;;rxgain=5.0
;;txgain=0.0
channel => 3
; Span 2: WCTDM/4 "Wildcard TDM400P REV I Board 5"
;;; line="5 WCTDM/4/0 FXOKS"
signalling=fxo_ks
callerid="Channel 5" <4025>
mailbox=4025
echocancel=512
echocancelwhenbridged=yes
echotraining=800
group=5
context=from-internal
channel => 5
;;; line="6 WCTDM/4/1 FXOKS"
signalling=fxo_ks
callerid="Channel 6" <4026>
mailbox=4026
echocancel=512
echocanc...
2010 Dec 07
3
Dahdi issue with Asterisk 1.8.0
...my config but I don't see what the
issue is.
Is there anything I am missing, or can you suggest some additional things to
look at?
Tim
chan_dahdi.conf
grep -v "^;" /etc/asterisk/chan_dahdi.conf | grep -v "^$"
[trunkgroups]
[channels]
language=en
context=phones
signalling=fxo_ks
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
group=1
callgroup=1
pickupgroup=1
dahdi-channels.conf:
; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F...
2004 Aug 24
0
How can i configure extensions.conf.
...;;;;
/etc/asterisk/zapata.conf
[channels]
relaxdtmf=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
immediate=no
context=bell
signalling=fxs_ks
channel=1-4
signalling=fxo_ks
callerid="Anolag 1"<801>
channel=5
signalling=fxo_ks
callerid="Anolag 2"<802>
channel=6
signalling=fxo_ks
callerid="Anolag 3"<803>
channel=7
signalling=fxo_ks
callerid="Anolag 4"<804>
channel=8
;;;;;;;;;;;;;;
extensions.conf
exten =&...
2004 Nov 26
1
Which is the best signalling for FXS
Hi All,
Which is the best signalling to use when connecting an FXS inteface on a
TDM400 to a standard telephone. I see that all examples use fxo_ks, but it
is my understanding that kewl start is really designed for connections to
the CO so that hangup etc. can be detected. So does it make any sense to
configure a telephone for fxo_ks? Or should it be configured for fxo_ls?
Regards
Garry Taylor
2006 Jan 31
1
Asterisk 1.2.1 + TDM400P + fax machine unreliable ?
...OKS (In use)
15 WCTDM/0/2 FXOKS (In use)
16 WCTDM/0/3 FXOKS (In use)
Part of /etc/asterisk/zapata.conf:
[channels]
; Default language
language=be
callerid=asreceived
immediate=no
switchtype=euroisdn
<cut the ISDN (bristuff) part of it..>
;
; TDM40B kanalen
;
signalling=fxo_ks
language=be
context=analog
echocancel=no
channel => 13
signalling=fxo_ks
language=be
context=analog
echocancel=no
channel => 14
signalling=fxo_ks
language=be
context=analog
echocancel=no
channel => 15
signalling=fxo_ks
language=be
context=analog
echocancel=no
channel => 16
# Part o...
2009 Oct 02
1
Creating a clear channel on zaptel
...a clear channel to a
recorder which starts recording certain message. Currently the channel which
is created by zaptel requires the other end to answer the call, and the
recorded can't answer, so the channel get hung up after a certain number of
rings.
Zaptel hardware is a Rhino R4T1 card with fxo_ks signalling, esf framing and
b8zs encoding. zapata.conf settings are as follows:
[channels]
group = 0,11
context = zaptel
signalling = fxo_ks
channel => 1-24
group =
context = default
Any help would be highly appreciated.
--
Zeeshan A Zakaria
-------------- next part --------------
An HTML at...
2009 Nov 28
1
DAHDI/1-2 v. DAHDI/2-1 ??
I've got a single TDM 400P board with two internal ports and 1 external.
chan_dahdi.conf:
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks not auto Use FXO signalling for FXS
group=0
channel => 1 ; Telephone attached to port 1
channel => 2 ; Telephone attached to port 2
context=incoming-pstn-line ; Incoming calls go to [incoming-pstn-line]
signalling=fxs_ks ; fxs_ks not auto Use FXS signalli...
2009 Mar 17
0
Weird issue with outbound calls and MOH
...All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
;;;;;;[5020]
signalling=fxo_ks
pickupgroup=
mailbox=5020 at device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
context=from-internal
callprogress=no
callgroup=
callerid=device <5020>
busydetect=no
busycount=7
accountcode=5020
channel=>131
;;;;;;[5021]
signalling=fxo_ks
pickupgroup=
mailbox=502...
2005 May 30
2
Error in Zapata Config?
...O Kewlstart signalling
May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring
signalling
-- Reconfigured channel 3, FXS Kewlstart signalling
-- Reconfigured channel 4, FXS Kewlstart signalling
Here is my config
/etc/asterisk/zapata.conf
[channels]
context=internal
signalling=fxo_ks
rxgain=0
txgain=20
channel => 1
context=analog2
signalling=fxo_ks
rxgain=0
txgain=0
channel => 2
context=pstn
signalling=fxs_ks
faxdetect=incoming
echotraining=800
echocancel=128
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=10
txgain=0
immediate=no
busydetect=no
callprogress=no
musiconhol...
2007 Jan 09
1
Caller Id problem
...he first ("normal") call.
Any idea is welcome.
Thanks!
AF.
--
*zapata.conf*
usecallerid=yes
usecallingpres=yes
callerid=asreceived
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
treewaycalling=yes
transfer=yes
useincomingcalleridonzaptransfer=yes
...
context=home
signalling=fxo_ks
channel => 1
context=office
signalling=fxo_ks
channel => 2
context=freebox
signalling=fxs_ks
callerid=asreceived
channel => 3
context=francetelecom
signalling=fxs_ks
callerid=asreceived
channel => 4
*extensions.conf*
exten => s,1,Dial(${HOME},,otw)
2003 May 03
2
Error working with X101P and S400P cards (fwd)
...(ast_load_resource): chan_zap.so:
load_module failed, returning -1
WARNING[8192]: File loader.c, Line 368 (load_modules): Loading module
chan_zap.so failed!
this is my /etc/zaptel.conf
fxoks = 1 #X101P
fxsks =2 #S400P
zapata.conf
signalling = fxs_ks
context =incoming
channel=1
signalling =fxo_ks
context= internal
channel2
extensions.conf
[incoming]
exten=>s,1,Dial,Zap/1|20
[outgoing]
exten => 125,1,Dial,Zap/2|20
[internal]
include=incoming
include=outgoing
i am running this on RH8.0. Someone Please assist.
--
Olaifa Augustine
General Data Engineering Services Ltd
2009 May 14
2
Problem with Asterisk + TDM410 FXO
...4)
4 channels to configure.
# cat /etc/zaptel.conf
fxsks=4
fxoks=1,2,3
loadzone=au
defaultzone=au
/etc/asterisk/zapata.conf
========================
# grep -v '^ *;' /etc/asterisk/zapata.conf | grep -v '^$'
[trunkgroups]
[channels]
context=default
switchtype=national
signalling=fxo_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgr...
2008 Sep 05
1
dahdi & tdm400p: no luck
...uld figure it out, I've installed dahdi and rc4.
My TDM400P doesn't answer fxo or fxs.
/etc/dahdi/system.conf:
loadzone = us
defaultzone=us
fxoks=1,2
fxsks=4
/etc/asterisk/chan_dahdi.conf:
[house-phones]
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel
dahdichan => 1 ; Telephone attached to port 1
dahdichan => 2 ; Telephone attached to port 2
[pstn]
context=incoming-pstn-line ; Incoming calls go to [incoming-pstn-line]
in extensions.conf
signalling=fxs_ks ; fxs_ks Us...
2008 Jan 02
5
Missing "zap" command in Asterisk 1.4.16
...ngcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;Sangoma A400 [slot:4 bus:16 span:1]
context=from-internal
group=1
signalling = fxo_ks
channel => 1
context=from-internal
group=1
signalling = fxo_ks
channel => 2
context=from-zaptel
group=0
signalling = fxs_ks
channel => 3
context=from-zaptel
group=0
signalling = fxs_ks
channel => 4
context=from-zaptel
group=0
signalling = fxs_ks
channel => 5
context=from-zaptel...
2006 Mar 20
1
How to make caller groups ???
Hello All !!!
I have 4 PSTN lines in the PBX server 1,2,3,4.
First line will be used by only one extension (i.e. for the boss) for incoming and outgoing. This line is dedicated for him only.(
The remaining lines will be shared by the employees
1) Group A have access to lines 2 , 3 & 4.
2) Group B have access to lines 3 & 4
3) Group C have access to line 4
2003 Aug 25
4
T100P/ TSU 600 installation problem
I have just received a T100P and an Adtran TSU 600 in
the mail.
I seem to be having a problem with the T100P card. So
far I have done the following:
vi zaptel.conf
fxoks=1-22
fxsks=23-24
...
vi zapata.conf
...
signalling=fxo_ks
...
channel => 1-22
...
signalling=fxs_ks
...
channel => 23-24
I then run
modprobe zaptel
modprobe wct1xxp
ztcfg -vv
There are no errors to report. In /proc/zaptel/1 all
of the configured channels are listed.
However, I do not have an LED lit up on the T100P. To
me, it makes sense that...
2006 Feb 19
3
Asterisk start errors with TDM2413E
...Kewlstart (Default) (Slaves: 14)
Channel 15: FXS Kewlstart (Default) (Slaves: 15)
Channel 16: FXS Kewlstart (Default) (Slaves: 16)
16 channels configured.
zaptel.conf
fxoks=1-4
fxsks=5-16
defaultzone=us
loadzone=us
zapata.conf
[channels]
signalling=fxo_ks
echocancel=yes
echocancelwhenbridged=yes
usecallerid=yes
context=outstation
channel=> 1-4
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
usecallerid=yes
group=2
context=incomingpstn
channel=> 5-16
Best regards,
Duane...