Hi all, I am trying to add a TigerJet usb adapter to my asterisk
installation
I have the 1.2.4 asterisk bristuffed version, holding two zaphfc (ISDN)
cards
If I connect the TigerJet adapter to my linux box (Suse 10) i see:
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 003: ID 06e6:831c Tiger Jet Network, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
and in warning log:
Feb 22 15:46:12 asterisk01 kernel: zaptel: module not supported by Novell,
setting U taint flag.
Feb 22 15:46:12 asterisk01 kernel: wcusb: module not supported by Novell,
setting U taint flag.
Feb 22 15:46:12 asterisk01 kernel: Wildcard USB FXS Interface driver
registered
So everything seems to be OK.
Then I modify to the /etc/zaptel.conf file:
# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=it
defaultzone=it
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,1,3,ccs,ami
bchan=4-5
dchan=6
# fxsks=7
fxoks=7
according to
http://www.voip-info.org/tiki-pagehistory.php?page=Asterisk+config+zaptel.conf&diff=13
I think that I should consider this card as
a Wildcard S100U (hence the fxoks line)
but if I type ztcfg -vvv i see :
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
7 channels configured.
Changing signalling on channel 7 from Clear channel to FXO Kewlstart
ZT_CHANCONFIG failed on channel 7: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
nothing changes if I modify fxoks=7 to fxsks=7. What am I doing wrong ?
does exist any incompatibilty between bristuff and S100U ?
Thanks in advance,
Andrea
Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.
Visitate il sito http://www.frameweb.it
