search for: s100u

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the S100U unit in two different computers both with different USB subsystems. The one it worked the best in used the usb-uhci USB driver. The other system uses the usb-ohci USB driver. To make sure it was not the installation, I used the same hard drive that had asterisk in both systems. And I moved the...

Hi, I have been trying to figure out why the S100U is not performing very well on RH9.. Here is my thinking..( may be totally wide of the mark but here goes anyway) I remember reading somwhere that the sound system used by RH has changed... Does the S100U not depend on the sound subsystem?? So what I think is that the sound subsystem in RH9 and...

We have a S100U which we were using as our sole internal phone extension. Today it died. Picking up the phone now results in a brief dialtone followed by bursts of random static and crackling noises and then a second or two of fast-busy followed by silence and more crackling noises. I've tried the hardware...

I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal. 1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. I did set the phone.conf mode to be dialtone but nothing works. 2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. How...

Hi, I'm trying to get an S100U that came as part of the dev kit light working. I have tried compiled EHCI as modules or directly into the kernel but the same problem happens both times: I connect the S100U and run modprobe wcusb - initially nothing happens (great - no errors, etc). Fairly soon the server will die. It seem to...

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then the phone connected to the S100U rings....

...ve been using Asterisk now for a few months for my small office (which is mostly just me while other guys are always on the road so we rely heavily on telephones) - I'm very excited with Asterisk as it can do everything I've ever wanted to do with a PBX. I'm having a problem with an S100U USB --> Telephone interface. I haven't actually made it work yet but I would like to hang a coreless telephone off this interface if possible. The problem is that when I connect the S100U and then load the wcusb driver (with "modprobe wcusb") my linux server will hang a few se...

Hi folks! I'm using an X100P (connected to my phone line) and an S100U, and when I calls out from the phone connected to the S100U it is a very bad sound quality, it "pops" and "jitters" a lot. But internal calls from for example a SIP client to the phone on the S100U sounds good. Calls from an SIP client to the outside world using the X100P also w...

I have an ATA box on my local LAN, talking to asterisk. On a remote LAN I have another instance of asterisk; that box has an S100U as its primary instrument. I set up an extension to dial between the two, sort of a "private line," and with the exception noted below, things appear to work just fine. That exception is echo. The "ATA" side of the conversation has a horrible echo, which makes the call alm...

Hi, There is someone on this list who has the specification for the IPW driver? I want to provide full support for it in DIAX Phone, but Actiontec does not answer to my mails. There is any windows driver available for the Digium's S100U USB interface? Anyone knows if it can provide full functionality for the connected phone, like callerid, callwaiting callerid, message indication, ring, etc.? Thanks, Dan

Hi, I have got a hissing/humming noise on my handset that is connected to the S100U USB device.. I was running a CVS version of * that was about 2 to 3 weeks old and had perfect quality.. But that HDD died on me so I reinstalled and used the latest CVS, now I have this sound that is best describes as a similar sound to the noise a cpu fan makes.. Like a high piched hissing noise....

After not having time to do anything with Asterisk for 2-3 months, I finally got a chance to get back into it. Unfortunately, I get the feeling that the S100U USB device that I purchased as part of the Developer's Kit (LITE) isn't working right. When I pick up the handset, all I hear is some either some low volume static or nothing at all. Only twice in the last week have I been able to get a dial tone and make a call. After I hang up, it g...

...a PCI card. > > Is that this type of asterisk setup is possible? If > so, what are the hardware that we can use for > connecting analog phones to the PCs (through USB or > PCI)? If this is not possible do you have any > suggestion for alternatives? > > We also heard about S100U, a FXO to USB converter. > Do > you think we can use this for what we need? Is that > S100U is reliable product to buy? Most of the mails > we > could see on S100U are older than 2 years. Is this a > currently supported product? > > Note once again we need this hardware for...

Hello, Where can I find docs/specs about USB FXS device (S100U)? How much does these adapters cost? Thanks in advance, Thomas

Anyone know how many RENs an S100U can drive? Or where I can get some sort of booster? I'm trying to drive 2 gong-type ringers (IE, 2.0A REN). - awh

Hi, I've added an S100U to my * setup. I've tried it using both uhci and usb-uhci USB driver modules. I both cases the audio is occasionally glitchy. In addition, usb-uhci complains Apr 18 19:06:21 bob kernel: usb-uhci.c: iso_find_start: gap in seamless isochronous scheduling uhci.o doesn't log this error, bu...

I have just started developing asterisk, and am trying to start simple. I have a X100P device and an S100U device. I am trying to use the examples provided, where I add a few lines to the /etc/zaptel.conf, /etc/asterisk/zapata.conf, and /etc/asterisk/extensions.conf so that I may connect an analog line to the X100P and an analog phone to the S100U. When I dial the analog line, it should ring the phone...

...you see this again, I am new to this list and accidentally put this message in another thread. What I want to know is, is there any way to send a hook-flash signal from a cell phone (and then have Asterisk pass it up to the PSTN?) I suspect we need an example. I have an X100P to the PSTN and an S100U to an Analog Phone (ext. 3100) Let's say my PSTN number is 555-1296. Usually, I have Asterisk take incoming calls on the X100P and send them to the analog phone on the S100U (exten => s,1,Goto(3100)) and from time to time I set Asterisk to call my cell phone, which it does over IAX with anot...

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here is my probelm: This is what i did. unplugged s100u rmmo...

...risk asterisk 196, 255 Feb 24 14:55 pseudo crw-rw---- 1 asterisk asterisk 196, 253 Feb 24 14:55 timer but NO channel 01 al all. I would like to know if anybody 1) ever succeded in having this configuration up and running. 2) ever succeded in having this configuration up and running with a *TRUE* S100U adapter from Digium. 3) If 2 is true *WHERE* it could be possible to buy this true adapter: on digium shop I was not able to find it. My opinion is that it could be an issue related to the operating system: I think I should do something similar to what I did on /etc/udev/rules.d/50-udev.rules in...