Aldo Gonzalez
2006-Feb-16 08:57 UTC
[Asterisk-Users] Problem making outbound calls on TE210P using NFAS
Hello,
I'm running Asterisk@home 2.5
asterisk 1.2.4
zapatel 1.2.2
libpri 1.2.2
on a Dell Poweredge 2850 (1 CPU) with a TE210P
I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able
to receive inbound
calls on all channels and can only make outbound calls on channels 25-48.
Attempting to make an outbound call on channels 1-23 results in congestion.
---------------------------
[/etc/zaptel.conf]
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF ClockSource
# ??: 1 TE2/0/1/1 Clear
# ??: 2 TE2/0/1/2 Clear
# ??: 3 TE2/0/1/3 Clear
# ??: 4 TE2/0/1/4 Clear
# ??: 5 TE2/0/1/5 Clear
# ??: 6 TE2/0/1/6 Clear
# ??: 7 TE2/0/1/7 Clear
# ??: 8 TE2/0/1/8 Clear
# ??: 9 TE2/0/1/9 Clear
# ??: 10 TE2/0/1/10 Clear
# ??: 11 TE2/0/1/11 Clear
# ??: 12 TE2/0/1/12 Clear
# ??: 13 TE2/0/1/13 Clear
# ??: 14 TE2/0/1/14 Clear
# ??: 15 TE2/0/1/15 Clear
# ??: 16 TE2/0/1/16 Clear
# ??: 17 TE2/0/1/17 Clear
# ??: 18 TE2/0/1/18 Clear
# ??: 19 TE2/0/1/19 Clear
# ??: 20 TE2/0/1/20 Clear
# ??: 21 TE2/0/1/21 Clear
# ??: 22 TE2/0/1/22 Clear
# ??: 23 TE2/0/1/23 Clear
# ??: 24 TE2/0/1/24 HDLCFCS
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" B8ZS/ESF
# ??: 25 TE2/0/2/1 Clear
# ??: 26 TE2/0/2/2 Clear
# ??: 27 TE2/0/2/3 Clear
# ??: 28 TE2/0/2/4 Clear
# ??: 29 TE2/0/2/5 Clear
# ??: 30 TE2/0/2/6 Clear
# ??: 31 TE2/0/2/7 Clear
# ??: 32 TE2/0/2/8 Clear
# ??: 33 TE2/0/2/9 Clear
# ??: 34 TE2/0/2/10 Clear
# ??: 35 TE2/0/2/11 Clear
# ??: 36 TE2/0/2/12 Clear
# ??: 37 TE2/0/2/13 Clear
# ??: 38 TE2/0/2/14 Clear
# ??: 39 TE2/0/2/15 Clear
# ??: 40 TE2/0/2/16 Clear
# ??: 41 TE2/0/2/17 Clear
# ??: 42 TE2/0/2/18 Clear
# ??: 43 TE2/0/2/19 Clear
# ??: 44 TE2/0/2/20 Clear
# ??: 45 TE2/0/2/21 Clear
# ??: 46 TE2/0/2/22 Clear
# ??: 47 TE2/0/2/23 Clear
# ??: 48 TE2/0/2/24 Clear
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
bchan=1-23,25-48
dchan=24
loadzone = us
defaultzone = us
---------------------------
[/etc/asterisk/zapata.conf]
[trunkgroups]
trunkgroup=>1,24
spanmap => 1,1,1
spanmap => 2,1,2
[channels]
language=en
context=from-pstn
group=1
signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
switchtype=5ess
pridialplan=national
callerid=asreceived under ;usedistinctiveringdetection=yes
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes ; default - no
echotraining=400 ; default 800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=yes
channel => 1-23,25-48
#include zapata-auto.conf
#include zapata_additional.conf
---------------------------
[/etc/sysconfig/zaptel]
MODULES="$MODULES wct2xxp"
---------------------------
Below is a snippet of /var/log/asterisk/full when attempting to make outbound
call via lower
channels:
Feb 16 10:41:34 VERBOSE[3878] logger.c: -- Executing
GotoIf("SIP/2002-2290", "0?16") in new
stack
Feb 16 10:41:34 DEBUG[3878] pbx.c: Not taking any branch
Feb 16 10:41:34 VERBOSE[3878] logger.c: -- Executing Dial("SIP/2002-
2290", "ZAP/g1/xxxxxxxxxx") in new stack
Feb 16 10:41:34 VERBOSE[3878] logger.c: -- Requested transfer capability:
0x00 - SPEECH
Feb 16 10:41:34 VERBOSE[3878] logger.c: -- Called g1/xxxxxxxxxx
Feb 16 10:41:35 VERBOSE[3368] logger.c: -- Channel 1/2, span 1 got hangup
Feb 16 10:41:35 VERBOSE[3878] logger.c: -- Zap/2-1 is circuit-busy
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Set option AUDIO MODE, value: ON(1) on
Zap/2-1
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Hangup: channel: 2 index = 0, normal =
15, callwait = -1,
thirdcall = -1
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Already hungup... Calling hangup once,
and clearing call
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: disabled echo cancellation on channel 2
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Set option TDD MODE, value: OFF(0) on
Zap/2-1
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Updated conferencing on 2, with 0
conference users
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on
Zap/2-1
Feb 16 10:41:35 DEBUG[3878] chan_zap.c: disabled echo cancellation on channel 2
Feb 16 10:41:35 VERBOSE[3878] logger.c: -- Hungup 'Zap/2-1'
Feb 16 10:41:35 VERBOSE[3878] logger.c: == Everyone is busy/congested at this
time (1:0/1/0)
Feb 16 10:41:35 DEBUG[3878] app_dial.c: Exiting with DIALSTATUS=CONGESTION.
where xxxxxxxxxx is a phone number
---------------------------
Enabling
CLI> pri intense debug span 1
-- Executing Dial("SIP/2002-8576", "ZAP/g1/18009993355")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
> [ 00 01 ce d2 08 02 00 07 05 04 03 80 90 a2 18 04 e9 81 83 82 6c 0c 21 80
38 30 30 34 35 36 32
30 39 39 70 0c a1 31 38 30 30 39 39 39 33 33 35 35 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 103 0: 0
> N(R): 105 P: 0
> 44 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer> Protocol Discriminator: Q.931 (8) len=44
> Call Ref: len= 2 (reference 7/0x7) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 04 e9 81 83 82]
> Channel ID (len= 6) [ Ext: 1 IntID: Explicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 DS1 Identifier: 1
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 2 ]
> [6c 0c 21 80 38 30 30 34 35 36 32 30 39 39]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan
(E.164/E.163) (1)> Presentation: Presentation permitted, user number
not screened
(0) '8004562099' ]> [70 0c a1 31 38 30 30 39 39 39 33 33 35 35]
> Called Number (len=14) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan
(E.164/E.163) (1) '18009993355' ]
asterisk1*CLI>
< [ 00 01 01 d0 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 104 P/F: 0
< 0 bytes of data
-- ACKing all packets from 102 to (but not including) 104
-- ACKing packet 103, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
< [ 02 01 d2 d0 08 02 80 07 5a 08 02 80 a2 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 105 0: 0
< N(R): 104 P: 0
< 9 bytes of data
-- ACKing all packets from 103 to (but not including) 104
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 7/0x7) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 80 a2]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
User (0)
< Ext: 1 Cause: Unknown (34), class = Network Congestion
(2) ]
Sending Receiver Ready (106)
> [ 02 01 01 d4 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 106 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 1/2, span 1 got hangup
-- Called g1/18009993355
-- Zap/2-1 is circuit-busy
-- Hungup 'Zap/2-1'
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Goto("SIP/2002-8576", "s-CONGESTION|1") in
new stack
-- Goto (macro-dialout-trunk,s-CONGESTION,1)
-- Executing NoOp("SIP/2002-8576", "Dial failed due to
CONGESTION") in new stack
-- Executing Macro("SIP/2002-8576", "outisbusy") in new
stack
-- Executing Playback("SIP/2002-8576",
"all-circuits-busy-now") in new stack
-- Playing 'all-circuits-busy-now' (language 'en')
-- Executing Playback("SIP/2002-8576",
"pls-try-call-later") in new stack
-- Playing 'pls-try-call-later' (language 'en')
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on
'SIP/2002-8576' in
macro 'outisbusy'
== Spawn extension (from-internal, 818009993355, 2) exited non-zero on
'SIP/2002-8576'
-- Executing Macro("SIP/2002-8576", "hangupcall") in new
stack
-- Executing ResetCDR("SIP/2002-8576", "w") in new stack
-- Executing NoCDR("SIP/2002-8576", "") in new stack
-- Executing Wait("SIP/2002-8576", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on
'SIP/2002-8576' in
macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on
'SIP/2002-8576'
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (106)
> [ 00 01 01 d5 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 106 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
asterisk1*CLI>
< [ 00 01 01 d1 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 104 P/F: 1
< 0 bytes of data
-- ACKing all packets from 103 to (but not including) 104
Thanks in advance,
Aldo
Sean Cook
2006-Feb-16 09:21 UTC
[Asterisk-Users] Problem making outbound calls on TE210P using NFAS
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Why do you have immediate set? *immediate*: Normally (i.e. with immediate set to 'no', the default), when you lift an FXS handset, the Zaptel driver provides you a dialtone and listens for digits that you dial, passing them on to Asterisk. Asterisk waits until the number you've dialed matches an extension, and then begins executing the first command on the matching extension. If you set immediate=yes, then Asterisk will instruct the Zaptel driver to not generate a dialtone when you lift a handset, instead passing control immediately to Asterisk. Asterisk will start executing the commands for this channel's "s" extension <http://www.voip-info.org/wiki/index.php?page=Asterisk+s+extension>. This is sometimes referred to as "batphone mode". Default: no. immediate=yes Aldo Gonzalez wrote:> Hello, > > I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri > 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P > > I have 2 t1 circuits using NFAS with dchan on 24 and no backup > dchan. I am able to receive inbound calls on all channels and can > only make outbound calls on channels 25-48. Attempting to make an > outbound call on channels 1-23 results in congestion. > > --------------------------- > > [/etc/zaptel.conf] # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" > B8ZS/ESF ClockSource # ??: 1 TE2/0/1/1 Clear # ??: 2 TE2/0/1/2 > Clear # ??: 3 TE2/0/1/3 Clear # ??: 4 TE2/0/1/4 Clear # ??: 5 > TE2/0/1/5 Clear # ??: 6 TE2/0/1/6 Clear # ??: 7 TE2/0/1/7 Clear # > ??: 8 TE2/0/1/8 Clear # ??: 9 TE2/0/1/9 Clear # ??: 10 TE2/0/1/10 > Clear # ??: 11 TE2/0/1/11 Clear # ??: 12 TE2/0/1/12 Clear # ??: 13 > TE2/0/1/13 Clear # ??: 14 TE2/0/1/14 Clear # ??: 15 TE2/0/1/15 > Clear # ??: 16 TE2/0/1/16 Clear # ??: 17 TE2/0/1/17 Clear # ??: 18 > TE2/0/1/18 Clear # ??: 19 TE2/0/1/19 Clear # ??: 20 TE2/0/1/20 > Clear # ??: 21 TE2/0/1/21 Clear # ??: 22 TE2/0/1/22 Clear # ??: 23 > TE2/0/1/23 Clear # ??: 24 TE2/0/1/24 HDLCFCS > > # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" B8ZS/ESF # ??: 25 > TE2/0/2/1 Clear # ??: 26 TE2/0/2/2 Clear # ??: 27 TE2/0/2/3 Clear # > ??: 28 TE2/0/2/4 Clear # ??: 29 TE2/0/2/5 Clear # ??: 30 TE2/0/2/6 > Clear # ??: 31 TE2/0/2/7 Clear # ??: 32 TE2/0/2/8 Clear # ??: 33 > TE2/0/2/9 Clear # ??: 34 TE2/0/2/10 Clear # ??: 35 TE2/0/2/11 Clear > # ??: 36 TE2/0/2/12 Clear # ??: 37 TE2/0/2/13 Clear # ??: 38 > TE2/0/2/14 Clear # ??: 39 TE2/0/2/15 Clear # ??: 40 TE2/0/2/16 > Clear # ??: 41 TE2/0/2/17 Clear # ??: 42 TE2/0/2/18 Clear # ??: 43 > TE2/0/2/19 Clear # ??: 44 TE2/0/2/20 Clear # ??: 45 TE2/0/2/21 > Clear # ??: 46 TE2/0/2/22 Clear # ??: 47 TE2/0/2/23 Clear # ??: 48 > TE2/0/2/24 Clear > > span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs > > bchan=1-23,25-48 dchan=24 > > loadzone = us defaultzone = us > > --------------------------- [/etc/asterisk/zapata.conf] > [trunkgroups] trunkgroup=>1,24 spanmap => 1,1,1 spanmap => 2,1,2 > [channels] language=en context=from-pstn group=1 signalling=pri_cpe > ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=5ess > pridialplan=national callerid=asreceived under > ;usedistinctiveringdetection=yes rxwink=300 ; Atlas > seems to use long (250ms) winks usecallerid=yes hidecallerid=no > callwaiting=yes usecallingpres=yes callwaitingcallerid=yes > threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes > echocancel=yes echocancelwhenbridged=yes ; default - no > echotraining=400 ; default 800 rxgain=0.0 txgain=0.0 callgroup=1 > pickupgroup=1 immediate=yes channel => 1-23,25-48 #include > zapata-auto.conf #include zapata_additional.conf > > --------------------------- [/etc/sysconfig/zaptel] > MODULES="$MODULES wct2xxp" > > --------------------------- > > Below is a snippet of /var/log/asterisk/full when attempting to > make outbound call via lower channels: > > > Feb 16 10:41:34 VERBOSE[3878] logger.c: -- Executing > GotoIf("SIP/2002-2290", "0?16") in new stack Feb 16 10:41:34 > DEBUG[3878] pbx.c: Not taking any branch Feb 16 10:41:34 > VERBOSE[3878] logger.c: -- Executing Dial("SIP/2002- 2290", > "ZAP/g1/xxxxxxxxxx") in new stack Feb 16 10:41:34 VERBOSE[3878] > logger.c: -- Requested transfer capability: 0x00 - SPEECH Feb > 16 10:41:34 VERBOSE[3878] logger.c: -- Called g1/xxxxxxxxxx Feb > 16 10:41:35 VERBOSE[3368] logger.c: -- Channel 1/2, span 1 got > hangup Feb 16 10:41:35 VERBOSE[3878] logger.c: -- Zap/2-1 is > circuit-busy Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Set option > AUDIO MODE, value: ON(1) on Zap/2-1 Feb 16 10:41:35 DEBUG[3878] > chan_zap.c: Hangup: channel: 2 index = 0, normal = 15, callwait > -1, thirdcall = -1 Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Already > hungup... Calling hangup once, and clearing call Feb 16 10:41:35 > DEBUG[3878] chan_zap.c: disabled echo cancellation on channel 2 Feb > 16 10:41:35 DEBUG[3878] chan_zap.c: Set option TDD MODE, value: > OFF(0) on Zap/2-1 Feb 16 10:41:35 DEBUG[3878] chan_zap.c: Updated > conferencing on 2, with 0 conference users Feb 16 10:41:35 > DEBUG[3878] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on > Zap/2-1 Feb 16 10:41:35 DEBUG[3878] chan_zap.c: disabled echo > cancellation on channel 2 Feb 16 10:41:35 VERBOSE[3878] logger.c: > -- Hungup 'Zap/2-1' Feb 16 10:41:35 VERBOSE[3878] logger.c: => Everyone is busy/congested at this time (1:0/1/0) Feb 16 10:41:35 > DEBUG[3878] app_dial.c: Exiting with DIALSTATUS=CONGESTION. > > where xxxxxxxxxx is a phone number > > --------------------------- > > Enabling CLI> pri intense debug span 1 -- Executing > Dial("SIP/2002-8576", "ZAP/g1/18009993355") in new stack -- > Requested transfer capability: 0x00 - SPEECH > >> [ 00 01 ce d2 08 02 00 07 05 04 03 80 90 a2 18 04 e9 81 83 82 6c >> 0c 21 80 38 30 30 34 35 36 32 > > 30 39 39 70 0c a1 31 38 30 30 39 39 39 33 33 35 35 ] > >> Informational frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 >> N(S): 103 0: 0 N(R): 105 P: 0 44 bytes of data > > -- Restarting T203 counter Stopping T_203 timer Starting T_200 > timer > >> Protocol Discriminator: Q.931 (8) len=44 Call Ref: len= 2 >> (reference 7/0x7) (Originator) Message type: SETUP (5) [04 03 80 >> 90 a2] Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info >> transfer capability: Speech (0) Ext: 1 Trans mode/rate: 64kbps, >> circuit-mode (16) Ext: 1 User information layer 1: u-Law (34) >> [18 04 e9 81 83 82] Channel ID (len= 6) [ Ext: 1 IntID: >> Explicit, PRI Spare: 0, Exclusive Dchan: 0 ChanSel: Reserved Ext: >> 1 DS1 Identifier: 1 Ext: 1 Coding: 0 Number Specified >> Channel Type: 3 Ext: 1 Channel: 2 ] [6c 0c 21 80 38 30 30 34 35 >> 36 32 30 39 39] Calling Number (len=14) [ Ext: 0 TON: National >> Number (2) NPI: ISDN/Telephony Numbering Plan > > (E.164/E.163) (1) > >> Presentation: Presentation permitted, user number not screened > > (0) '8004562099' ] > >> [70 0c a1 31 38 30 30 39 39 39 33 33 35 35] Called Number >> (len=14) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony >> Numbering Plan > > (E.164/E.163) (1) '18009993355' ] asterisk1*CLI> < [ 00 01 01 d0 ] > > < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 > EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 104 > P/F: 0 < 0 bytes of data -- ACKing all packets from 102 to (but not > including) 104 -- ACKing packet 103, new txqueue is -1 (-1 means > empty) -- Since there was nothing left, stopping T200 counter -- > Nothing left, starting T203 counter -- Restarting T203 counter > > < [ 02 01 d2 d0 08 02 80 07 5a 08 02 80 a2 ] > > < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 > EA: 1 < N(S): 105 0: 0 < N(R): 104 P: 0 < 9 bytes of data -- > ACKing all packets from 103 to (but not including) 104 -- Since > there was nothing left, stopping T200 counter -- Stopping T203 > counter since we got an ACK -- Nothing left, starting T203 counter > < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 > (reference 7/0x7) (Terminator) < Message type: RELEASE COMPLETE > (90) < [08 02 80 a2] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) > standard (0) 0: 0 Location: User (0) < Ext: 1 > Cause: Unknown (34), class = Network Congestion (2) ] Sending > Receiver Ready (106) > >> [ 02 01 01 d4 ] > > >> Supervisory frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000 EA: 1 >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 106 P/F: 0 0 >> bytes of data > > -- Restarting T203 counter -- Restarting T203 counter -- Channel > 1/2, span 1 got hangup -- Called g1/18009993355 -- Zap/2-1 is > circuit-busy -- Hungup 'Zap/2-1' == Everyone is busy/congested at > this time (1:0/1/0) -- Executing Goto("SIP/2002-8576", > "s-CONGESTION|1") in new stack -- Goto > (macro-dialout-trunk,s-CONGESTION,1) -- Executing > NoOp("SIP/2002-8576", "Dial failed due to CONGESTION") in new stack > -- Executing Macro("SIP/2002-8576", "outisbusy") in new stack -- > Executing Playback("SIP/2002-8576", "all-circuits-busy-now") in new > stack -- Playing 'all-circuits-busy-now' (language 'en') -- > Executing Playback("SIP/2002-8576", "pls-try-call-later") in new > stack -- Playing 'pls-try-call-later' (language 'en') == Spawn > extension (macro-outisbusy, s, 2) exited non-zero on > 'SIP/2002-8576' in macro 'outisbusy' == Spawn extension > (from-internal, 818009993355, 2) exited non-zero on 'SIP/2002-8576' > -- Executing Macro("SIP/2002-8576", "hangupcall") in new stack -- > Executing ResetCDR("SIP/2002-8576", "w") in new stack -- Executing > NoCDR("SIP/2002-8576", "") in new stack -- Executing > Wait("SIP/2002-8576", "5") in new stack == Spawn extension > (macro-hangupcall, s, 3) exited non-zero on 'SIP/2002-8576' in > macro 'hangupcall' == Spawn extension (from-internal, h, 1) exited > non-zero on 'SIP/2002-8576' T203 counter expired, sending RR and > scheduling T203 again Sending Receiver Ready (106) > >> [ 00 01 01 d5 ] > > >> Supervisory frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 106 P/F: 1 0 >> bytes of data > > -- Restarting T203 counter asterisk1*CLI> < [ 00 01 01 d1 ] > > < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 > EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 104 > P/F: 1 < 0 bytes of data -- ACKing all packets from 103 to (but not > including) 104 > > > Thanks in advance, Aldo > > _______________________________________________ --Bandwidth and > Colocation provided by Easynews.com -- > > Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFD9KaYy9wPyZpnL2URAl0cAJ4tYVqHtUMVHxKBAglcUSYTStRkyACeOQcA tYclmb7lQ5dA+/NBQyHicHo=za6c -----END PGP SIGNATURE-----