asterisk users - Feb 2006 - sipura 3000 and other probs

To All,

I recently purchased a Sipura 3000 for home use. Generally it seems to
work fine, but it also majorly screws up on a frequent, almost daily,
basis.

Terrible echo problems that come and go, and sometimes it just seems to
"lose its way" and can't re-register.

For example, I'll be talking to an incoming caller and an echo starts
quietly in the background. Within a minute or so, I'll lose the
connection, with my voice 100% reflecting back at me, and the caller says
the same occurs at their end, his/her voice 100% reflecting back to
him/her.

I usually have to reset the device completely at that point. Other times,
I'll get a call and talk for 1/2 hour with no problems whatsoever.

I have it set up with a@h V 2.2 according to the setup at

  http://mundy.org/blog/index.php?p=65

altough I am not using the caller ID portion of his setup.

Also I get the following strange error:

chan_sip.c: That's odd...  Got a response on a call we dont know about.
            Cseq 102 Cmd SIP/2.0

I can't seem to pin it down. I've checked the source (chan_sip.c) and
because I'm not well aquainted with the protocol, I'm about as clueless
as
could be as to what its telling me.

Unfortunately its a headless box, and so by the time I can log in through
PuTty/whatever and fire up asterisk -r, the call is long gone. On the
other hand, with my not so bountiful skills, I'm not sure how much good a
sip debug would help me anyway.

Any help or advice on either issue (could they be related?) would be
greatly appreciated.

Regards,

John C.

There's a vox forum that focuses on Sipuras - post your query there for good
tech help.  We've deployed a number of Sipura's and haven't
experienced that
problem (yet).  Have you started with the basics: firmware version, analog
cabling, etc.

MD 

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of john@cusick.ws
Sent: Wednesday, February 08, 2006 3:21 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] sipura 3000 and other probs

To All,

I recently purchased a Sipura 3000 for home use. Generally it seems to work
fine, but it also majorly screws up on a frequent, almost daily, basis.

Terrible echo problems that come and go, and sometimes it just seems to
"lose its way" and can't re-register.

For example, I'll be talking to an incoming caller and an echo starts
quietly in the background. Within a minute or so, I'll lose the connection,
with my voice 100% reflecting back at me, and the caller says the same
occurs at their end, his/her voice 100% reflecting back to him/her.

I usually have to reset the device completely at that point. Other times,
I'll get a call and talk for 1/2 hour with no problems whatsoever.

I have it set up with a@h V 2.2 according to the setup at

  http://mundy.org/blog/index.php?p=65

altough I am not using the caller ID portion of his setup.

Also I get the following strange error:

chan_sip.c: That's odd...  Got a response on a call we dont know about.
            Cseq 102 Cmd SIP/2.0

I can't seem to pin it down. I've checked the source (chan_sip.c) and
because I'm not well aquainted with the protocol, I'm about as clueless
as
could be as to what its telling me.

Unfortunately its a headless box, and so by the time I can log in through
PuTty/whatever and fire up asterisk -r, the call is long gone. On the other
hand, with my not so bountiful skills, I'm not sure how much good a sip
debug would help me anyway.

Any help or advice on either issue (could they be related?) would be greatly
appreciated.

Regards,

John C.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users