asterisk users - Oct 2005 - AVM B1

Hi,

I'm trying to get Asterisk working with the AVM B1 card. I've tried
every
instruction set I can find, but to no avail.

I think I'm getting mixed up as to what Zaptel/CAPI configuration to use.

If someone is currently using one of these cards, would it be possible to
mail me a few bits of the important config files?

Sorry if I should have included something else too, but let me know and I'll
provide it!

Steve


My capi.conf is as follows:

# card          file    proto   io      irq     mem     cardnr  options
#b1isa          b1.t4   DSS1    0x150   7       -       -       P2P
b1pci           b1.t4   DSS1    -       -       -       -
c4              c4.bin  DSS1    -       -       -       -
c4              -       DSS1    -       -       -       -
c4              -       DSS1    -       -       -       -       P2P
c4              -       DSS1    -       -       -       -       P2P
#c2             c2.bin  DSS1    -       -       -       -
#c2             -       DSS1    -       -       -       -
#t1isa          t1.t4   DSS1    0x340   9       -       0
#t1pci          t1.t4   DSS1    -       -       -       -
#fcpci          -       -       -       -       -       -
#fcclassic      -       -       0x150   10      -       -


CAPI seems to be installed correctly:

talky:/home/steve# capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-03  (49.19)
Serial Number: 3904932
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000001f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 for fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x8000003f
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
   T.30 for fax group 3
   T.30 for fax group 3 with extensions

  0100
  0200
  39000000
  1f000040
  1b0b0000
  3f000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS

Steve Foy schrieb:
> Hi,
> 
> I'm trying to get Asterisk working with the AVM B1 card. I've tried
every
> instruction set I can find, but to no avail.
You should use the chan_capi or chan_capi-cm. I used to use an old B1 
ISA card, which worked without much trouble, after I got the CAPI itself 
running. Asterisk ontop of CAPI worked just fine.

You don't need to configure anything for the Zaptel, except if you want 
to use Asterisk functionality that needs a timing source. But that 
should be the second step.
-- 
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA