thr3ads.net - asterisk users - [Asterisk-Users] TDM02B card difficulties [Oct 2005]

If this information is useful, please help other people find it:
Share via:

Min Qiu

2005-Oct-07 12:41 UTC

[Asterisk-Users] TDM02B card difficulties

Hi all,

I just installed an TDM02B.  My system is a dell pc with
linux 2.6.12-1.1456_FC4
asterisk-1.2.0-beta1
zaptel-1.2.0-beta1
libpri-1.2.0-beta1

in /etc/zaptel.conf I have (all others are default):
fxsks=3-4                       <--- I saw light in the ports
channels=1-2                    <--- change it to 3-4 has same result

but...
[root@nmsd0 asterisk]# /etc/rc.d/init.d/zaptel restart
Unloading zaptel hardware drivers: wctdm.
Removing zaptel module:                                    [  OK  ]
Loading zaptel framework:                                  [  OK  ]
Waiting for zap to come online...OK
Loading zaptel hardware modules:Running ztcfg:  Notice: Configuration file is
/etc/zaptel.conf
line 207: Cannot get number of tones chanel 1
line 207: Cannot init tones chanel 1
/etc/init.d/functions: line 408: 13058 Segmentation fault      $*
                                                           [FAILED]

Wires are checked.  Can anyone point me to next step?

Thanks a lot,

Min

Tzafrir Cohen

2005-Oct-07 13:57 UTC

head link

[Asterisk-Users] TDM02B card difficulties

On Fri, Oct 07, 2005 at 03:41:43PM -0400, Min Qiu wrote:> 
> Hi all,
> 
> I just installed an TDM02B.  My system is a dell pc with
> linux 2.6.12-1.1456_FC4
> asterisk-1.2.0-beta1
> zaptel-1.2.0-beta1
> libpri-1.2.0-beta1
> 
> in /etc/zaptel.conf I have (all others are default):
> fxsks=3-4                       <--- I saw light in the ports
> channels=1-2                    <--- change it to 3-4 has same result
cat /proc/zaptel/1 to see the channel numbers.

Anyway, the last line is incorrect. It should be used in zapata.conf and
not in zaptel.conf .
> 
> but...
> [root@nmsd0 asterisk]# /etc/rc.d/init.d/zaptel restart
> Unloading zaptel hardware drivers: wctdm.
> Removing zaptel module:                                    [  OK  ]
> Loading zaptel framework:                                  [  OK  ]
> Waiting for zap to come online...OK
> Loading zaptel hardware modules:Running ztcfg:  Notice: Configuration file
is /etc/zaptel.conf
> line 207: Cannot get number of tones chanel 1
> line 207: Cannot init tones chanel 1
> /etc/init.d/functions: line 408: 13058 Segmentation fault      $*
>                                                            [FAILED]
> 
> Wires are checked.  Can anyone point me to next step?
> 
> Thanks a lot,
> 
> Min
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir@cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend

Min Qiu

2005-Oct-10 07:27 UTC

head link

[Asterisk-Users] TDM02B card difficulties

Thank you for your respond, please see more detail inline...

Min
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of 
> Tzafrir Cohen
> Sent: Friday, October 07, 2005 4:57 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] TDM02B card difficulties
> 
> 
> On Fri, Oct 07, 2005 at 03:41:43PM -0400, Min Qiu wrote:
> > 
> > Hi all,
> > 
> > I just installed an TDM02B.  My system is a dell pc with
> > linux 2.6.12-1.1456_FC4
> > asterisk-1.2.0-beta1
> > zaptel-1.2.0-beta1
> > libpri-1.2.0-beta1
> > 
> > in /etc/zaptel.conf I have (all others are default):
> > fxsks=3-4                       <--- I saw light in the ports
> > channels=1-2                    <--- change it to 3-4 has 
> same result
> 
> cat /proc/zaptel/1 to see the channel numbers.
[root@nmsd0 mqiu]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0
           2 WCTDM/0/1
           3 WCTDM/0/2
           4 WCTDM/0/3
> 
> Anyway, the last line is incorrect. It should be used in 
> zapata.conf and
> not in zaptel.conf .
The zaptel.conf has "channels=..." as an example.  Took the line
out I have:

 [chan_phone.so] => (Linux Telephony API Support)
  == Parsing '/etc/asterisk/phone.conf': Found
  == Registered channel type 'Phone' (Standard Linux Telephony API
Driver)
 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Oct 10 10:28:18 WARNING[28754]: chan_zap.c:890 zt_open: Unable to specify
channel 1: No such device or address
Oct 10 10:28:18 ERROR[28754]: chan_zap.c:6650 mkintf: Unable to open channel 1:
No such device or address
here = 0, tmp->channel = 1, channel = 1
Oct 10 10:28:18 ERROR[28754]: chan_zap.c:10030 setup_zap: Unable to register
channel '1'
Oct 10 10:28:18 WARNING[28754]: loader.c:403 __load_resource: chan_zap.so:
load_module failed, returning -1
Oct 10 10:28:18 WARNING[28754]: loader.c:543 load_modules: Loading module
chan_zap.so failed!
Ouch ... error while writing audio data: : Broken pipe


> 
> > 
> > but...
> > [root@nmsd0 asterisk]# /etc/rc.d/init.d/zaptel restart
> > Unloading zaptel hardware drivers: wctdm.
> > Removing zaptel module:                                    [  OK  ]
> > Loading zaptel framework:                                  [  OK  ]
> > Waiting for zap to come online...OK
> > Loading zaptel hardware modules:Running ztcfg:  Notice: 
> Configuration file is /etc/zaptel.conf
> > line 207: Cannot get number of tones chanel 1
> > line 207: Cannot init tones chanel 1
> > /etc/init.d/functions: line 408: 13058 Segmentation fault      $*
> >                                                            [FAILED]
> > 
> > Wires are checked.  Can anyone point me to next step?
> > 
> > Thanks a lot,
> > 
> > Min
> > 
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > Asterisk-Users@lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> -- 
> Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
> http://tzafrir.org.il |                           | a Mutt's  
> tzafrir@cohens.org.il |                           |  best
> ICQ# 16849755         |                           | friend
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Min Qiu

2005-Oct-11 10:34 UTC

head link

[Asterisk-Users] TDM02B card difficulties

Tzafrir,

The problem was indeed as you discribed.  Digium support
help me to straight out my setting by doing exactly what
you said.  I was simply mixed up with channels config
by trying different combination of signal, channels value 
in zaptel.conf and zapata.conf.

Thanks a lot,

Min

> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com 
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of 
> Tzafrir Cohen
> Sent: Monday, October 10, 2005 4:16 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] TDM02B card difficulties
> 
> 
> On Mon, Oct 10, 2005 at 10:27:19AM -0400, Min Qiu wrote:
> > Thank you for your respond, please see more detail inline...
> > 
> > Min
> > 
> > > -----Original Message-----
> > > From: asterisk-users-bounces@lists.digium.com 
> > > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of 
> > > Tzafrir Cohen
> > > Sent: Friday, October 07, 2005 4:57 PM
> > > To: asterisk-users@lists.digium.com
> > > Subject: Re: [Asterisk-Users] TDM02B card difficulties
> > > 
> > > 
> > > On Fri, Oct 07, 2005 at 03:41:43PM -0400, Min Qiu wrote:
> > > > 
> > > > Hi all,
> > > > 
> > > > I just installed an TDM02B.  My system is a dell pc with
> > > > linux 2.6.12-1.1456_FC4
> > > > asterisk-1.2.0-beta1
> > > > zaptel-1.2.0-beta1
> > > > libpri-1.2.0-beta1
> > > > 
> > > > in /etc/zaptel.conf I have (all others are default):
> > > > fxsks=3-4                       <--- I saw light in the
ports
> > > > channels=1-2                    <--- change it to 3-4 has
> > > same result
> > > 
> > > cat /proc/zaptel/1 to see the channel numbers.
> > 
> > [root@nmsd0 mqiu]# cat /proc/zaptel/1
> > Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> > 
> >            1 WCTDM/0/0
> >            2 WCTDM/0/1
> >            3 WCTDM/0/2
> >            4 WCTDM/0/3
> 
> None of them has been configured by ztcfg, right?
> 
> What's the output of ztcfg -vv
> 
> > 
> > > 
> > > Anyway, the last line is incorrect. It should be used in 
> > > zapata.conf and
> > > not in zaptel.conf .
> > 
> > The zaptel.conf has "channels=..." as an example.  Took the
line
> > out I have:
> 
> It shouldn't . 
> 
> Could you please post /etc/zaptel.conf and /etc/asterisk/zapata.conf ?
> 
> -- 
> Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
> http://tzafrir.org.il |                           | a Mutt's  
> tzafrir@cohens.org.il |                           |  best
> ICQ# 16849755         |                           | friend
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Possibly Parallel Threads

Search for more apparently analagous threads

asterisk users - Oct 2005 - TDM02B card difficulties

[Asterisk-Users] TDM02B card difficulties

[Asterisk-Users] TDM02B card difficulties

[Asterisk-Users] TDM02B card difficulties

[Asterisk-Users] TDM02B card difficulties

Possibly Parallel Threads