Hi all, The firmware I used is pa168s_iax2_us_151011.bin. My problem is the handset dial before I finished key in all the numbers, no matter how fast I managed to press the keys. It appeared it always dialed immediately, for example "011862", when I actually ment to dial 0118620xxxxxxxx. Thus left the remaining numbers "0xxxxxxxx" unsent. The handset had its dial plan disabled. It configured to use iax protocol. My extensions.conf has this: exten=_01186.,1, dial(SIP/<voipprovider>,60) and it works fine with other iaxy and Cisco ATA. Anyone encounter this symptom? Can you share your experience? Thanks, Min
Min Qiu wrote:> Hi all, > > The firmware I used is pa168s_iax2_us_151011.bin. > > My problem is the handset dial before I finished key in all > the numbers, no matter how fast I managed to press the keys. > It appeared it always dialed immediately, for example "011862", > when I actually ment to dial 0118620xxxxxxxx. Thus left the > remaining numbers "0xxxxxxxx" unsent. > > The handset had its dial plan disabled. It configured to use > iax protocol. My extensions.conf has this: > > exten=_01186.,1, dial(SIP/<voipprovider>,60) > > and it works fine with other iaxy and Cisco ATA. > > Anyone encounter this symptom? Can you share your experience? > > Thanks, > > Min > >Do you have remote dialplan ticked? (only available in the IAX firmware). This function causes the above effect and can only appears to work with very simple dialplans and should generally not be used. You may want to roll-back to the 1.50 firmware (ask if you can't find it elsewhere) there are sound quality issues with the 1.51 release.
On 6/12/2006, "Min Qiu" <mqiu@globalinternetworking.com> wrote:>Hi all, > >The firmware I used is pa168s_iax2_us_151011.bin. > >My problem is the handset dial before I finished key in all >the numbers, no matter how fast I managed to press the keys. >It appeared it always dialed immediately, for example "011862", >when I actually ment to dial 0118620xxxxxxxx. Thus left the >remaining numbers "0xxxxxxxx" unsent. > >The handset had its dial plan disabled. It configured to use >iax protocol. My extensions.conf has this: > >exten=_01186.,1, dial(SIP/<voipprovider>,60) > >and it works fine with other iaxy and Cisco ATA. > >Anyone encounter this symptom? Can you share your experience? > >Thanks, > >MinMin _ I amybe shooting in the dark here but - are you using inband DTMF? My AT320 only dials after I hit the Dial button or it times out. I do NOT use inband DTMF. Brett
> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > brett@websmyths.com > Sent: Monday, June 12, 2006 2:09 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] use AT320 international call > > > On 6/12/2006, "Min Qiu" <mqiu@globalinternetworking.com> wrote: > >Hi all, > > > >The firmware I used is pa168s_iax2_us_151011.bin. > > > >My problem is the handset dial before I finished key in all > >the numbers, no matter how fast I managed to press the keys. > >It appeared it always dialed immediately, for example "011862", > >when I actually ment to dial 0118620xxxxxxxx. Thus left the > >remaining numbers "0xxxxxxxx" unsent. > > > >The handset had its dial plan disabled. It configured to use > >iax protocol. My extensions.conf has this: > > > >exten=_01186.,1, dial(SIP/<voipprovider>,60) > > > >and it works fine with other iaxy and Cisco ATA. > > > >Anyone encounter this symptom? Can you share your experience? > > > >Thanks, > > > >Min > > Min _ I amybe shooting in the dark here but - are you using > inband DTMF?You hit the target. The default is inband DTMF and I did not change it (do have the knoweldge to configure it). I'll try the other option. Thanks for the help. Min> > My AT320 only dials after I hit the Dial button or it times > out. I do NOT > use inband DTMF. > > Brett > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Thomas Kenyon > Sent: Monday, June 12, 2006 2:06 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] use AT320 international call > > > Min Qiu wrote: > > Hi all, > > > > The firmware I used is pa168s_iax2_us_151011.bin. > > > > My problem is the handset dial before I finished key in all > > the numbers, no matter how fast I managed to press the keys. > > It appeared it always dialed immediately, for example "011862", > > when I actually ment to dial 0118620xxxxxxxx. Thus left the > > remaining numbers "0xxxxxxxx" unsent. > > > > The handset had its dial plan disabled. It configured to use > > iax protocol. My extensions.conf has this: > > > > exten=_01186.,1, dial(SIP/<voipprovider>,60) > > > > and it works fine with other iaxy and Cisco ATA. > > > > Anyone encounter this symptom? Can you share your experience? > > > > Thanks, > > > > Min > > > > > Do you have remote dialplan ticked? (only available in the > IAX firmware).Not sure, I'll double check...> This function causes the above effect and can only appears to > work with > very simple dialplans and should generally not be used. > > You may want to roll-back to the 1.50 firmware (ask if you > can't find it > elsewhere) there are sound quality issues with the 1.51 release.Arh... I did experence sound quality issues and I pointed my finger toward my VoIP provider;-) Good to know. Can you pass a pointer to where I can get 1.50? Thanks a lot, Min> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Min Qiu wrote:> Arh... I did experence sound quality issues and I pointed > my finger toward my VoIP provider;-) Good to know. Can > you pass a pointer to where I can get 1.50? > > Thanks a lot, > > Min >Atcom support will send you one by email, or I can email you a copy.