Icecube Ryder
2005-Aug-23 04:02 UTC
[Asterisk-Users] X100P Clone not picking up incoming calls. [POTS]
Hello All, I have this strange problem, I can dial out with my sip phone and it seems to work relatively well, but when I call in, the line just rings and rings, I get no indication in asterisk that it's detecting an incoming call. The strange thing is that in ztmonitor 1 -vv the rx volume goes from around 99% when the line is idle to 0% as soon as the line starts ringing. I'm located in iceland, and have set my country settings to no[rway] which should be the same. I've even edited the [no] signaling section in indications.conf from 425 to 440 (tone A) (and 450 too) but no success. I've tried using the OSS and ALSA sound systems in case there was some error decoding the tone. I've tried revesing ring and tip on the POTS line itself. I've tried starting the zap driver in all modes (ks, ls, gs) If anyone has any idea what's wrong, please reply asap, especially if any norwegians see this :) Snippets from conf files: /etc/zaptel.conf loadzone=no defaultzone=no fxsls=1 /etc/asterisk/zapata.conf [channels] context=pots signalling=fxs_ls echocancel=yes echocancelwhenbridged=yes rxgain=1.0 txgain=1.0 immediate=yes busydetect=yes busycount=3 channel => 1 /etc/asterisk/extensions.conf [global] CONSOLE=Console/dsp TRUNK=Zap/1 [local] ;ignorepat => 9 exten => _9.,1,Dial,Zap/1/${EXTEN:1} exten => _9.,2,Congestion exten => 2000,hint,SIP/2000 ; Channel hints for presence [pots] exten => s,1,Answer exten => s,2,DigitTimeout,5 exten => s,3,ResponseTimeout,10 exten => s,4,Playback(groovy) exten => s,5,Playback(goodbye) exten => s,6,Hangup Regards, K.Reykdal.