asterisk users - Sep 2004 - Asterisk is not "picking up the phone" with a x100p card

Hi.

I have a x100p card installed on my asterisk box... my zapata.conf file 
includes the following lines:

[channels]
context=default
switchtype=national
signalling=fxo_ls
rxwink=300
echocancel=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1


Basically, the zapata.conf file generated by make samples.

Then in my extensions.conf I have this:

[default]
include => demo

And demo is also the included in the sample extensions.conf

Now, when I call into my PSTN line connected to the x100p card (which 
also has a phone attached just to hear the ringing), asterisk is not 
answering the call. I expected it to go into the [default] context, 
which should make a welcome speech.

I am able to call asterisk from the console and everything goes ok. This 
is also the lsmod report concerning wcfxo and zaptel when asterisk is 
not running:

wcfxo                   8704   0  (unused)
zaptel                188416   0  [wcfxo]

and this is when asterisk is running:

wcfxo                   8704   0  (unused)
zaptel                188416   4  [wcfxo]

so I assume zaptel is being used by asterisk as expected.

Any hints on why asterisk doens't get the call?

Thanks in advance.

RODOLFO


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0438-1, 14/09/2004
Tested on: 15/09/2004 23:51:53
avast! - copyright (c) 2000-2004 ALWIL Software.
http://www.avast.com

Rodolfo,

Shouldn't it be siganlling=fxs_ls for the x100p ?
Where is your channel => 1

What is in your zaptel.conf ?

Dave

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Rodolfo
Grave
Sent: 15 September 2004 22:52
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Asterisk is not "picking up the phone" with
ax100p card


Hi.

I have a x100p card installed on my asterisk box... my zapata.conf file 
includes the following lines:

[channels]
context=default
switchtype=national
signalling=fxo_ls
rxwink=300
echocancel=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1


Basically, the zapata.conf file generated by make samples.

Then in my extensions.conf I have this:

[default]
include => demo

And demo is also the included in the sample extensions.conf

Now, when I call into my PSTN line connected to the x100p card (which 
also has a phone attached just to hear the ringing), asterisk is not 
answering the call. I expected it to go into the [default] context, 
which should make a welcome speech.

I am able to call asterisk from the console and everything goes ok. This 
is also the lsmod report concerning wcfxo and zaptel when asterisk is 
not running:

wcfxo                   8704   0  (unused)
zaptel                188416   0  [wcfxo]

and this is when asterisk is running:

wcfxo                   8704   0  (unused)
zaptel                188416   4  [wcfxo]

so I assume zaptel is being used by asterisk as expected.

Any hints on why asterisk doens't get the call?

Thanks in advance.

RODOLFO


---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0438-1, 14/09/2004
Tested on: 15/09/2004 23:51:53
avast! - copyright (c) 2000-2004 ALWIL Software.
http://www.avast.com



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users