thr3ads.net - asterisk users - [Asterisk-Users] wildcard/FXO config [Aug 2005]

If this information is useful, please help other people find it:
Share via:

David Williams

2005-Aug-11 21:20 UTC

[Asterisk-Users] wildcard/FXO config

Trying to config the latest Asterisk/zaptel with an Digium Wildcard and a
single X100m FXO interface connected to a POTS analog line.

Build and install of both work ok  - I'm using Suse 8 on a dual Pentium box.
I load
the driver with "modprobe wctdm" and the LED on the wildcard lights
up. Then I start
Asterisk with "asterisk -vvvgc" and asterisk fails to start.
The messages look pretty good till the last few lines..

.
.
.
Aug 11 08:29:42 WARNING[6888]: chan_zap.c:9651 setup_zap: Ignoring
switchtype
Aug 11 08:29:42 WARNING[6888]: chan_zap.c:778 zt_open: Unable to specify
channel 1: No such device or address
Aug 11 08:29:42 ERROR[6888]: chan_zap.c:6239 mkintf: Unable to open
channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Aug 11 08:29:42 ERROR[6888]: chan_zap.c:9191 setup_zap: Unable to
register channel '1'
Aug 11 08:29:42 WARNING[6888]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Aug 11 08:29:42 WARNING[6888]: loader.c:440 load_modules: Loading module
chan_zap.so failed!

Any idea how I messed up the config files?

--Dave


Here's the entire verbose output:

# asterisk -vvvgc
  == Parsing '/etc/asterisk/asterisk.conf': Found
  == Parsing '/etc/asterisk/extconfig.conf': Found
Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster@digium.com>
========================================================================  ==
Parsing '/etc/asterisk/logger.conf': Found
Asterisk Event Logger Started /var/log/asterisk/event_log
  == Manager registered action Ping
  == Manager registered action Events
  == Manager registered action Logoff
  == Manager registered action Hangup
  == Manager registered action Status
  == Manager registered action Setvar
  == Manager registered action Getvar
  == Manager registered action Redirect
  == Manager registered action Originate
  == Manager registered action Command
  == Manager registered action ExtensionState
  == Manager registered action AbsoluteTimeout
  == Manager registered action MailboxStatus
  == Manager registered action MailboxCount
  == Manager registered action ListCommands
  == Parsing '/etc/asterisk/manager.conf': Found
  == Parsing '/etc/asterisk/rtp.conf': Found
  == RTP Allocating from port range 10000 -> 20000
Asterisk PBX Core Initializing
Registering builtin applications:
[AbsoluteTimeout]
  == Registered application 'AbsoluteTimeout'
[Answer]
  == Registered application 'Answer'
[BackGround]
  == Registered application 'BackGround'
[Busy]
  == Registered application 'Busy'
[Congestion]
  == Registered application 'Congestion'
[DigitTimeout]
  == Registered application 'DigitTimeout'
[Goto]
  == Registered application 'Goto'
[GotoIf]
  == Registered application 'GotoIf'
[GotoIfTime]
  == Registered application 'GotoIfTime'
[Hangup]
  == Registered application 'Hangup'
[NoOp]
  == Registered application 'NoOp'
[Prefix]
  == Registered application 'Prefix'
[Progress]
  == Registered application 'Progress'
[ResetCDR]
  == Registered application 'ResetCDR'
[ResponseTimeout]
  == Registered application 'ResponseTimeout'
[Ringing]
  == Registered application 'Ringing'
[SayNumber]
  == Registered application 'SayNumber'
[SayDigits]
  == Registered application 'SayDigits'
[SayAlpha]
  == Registered application 'SayAlpha'
[SayPhonetic]
  == Registered application 'SayPhonetic'
[SetAccount]
  == Registered application 'SetAccount'
[SetAMAFlags]
  == Registered application 'SetAMAFlags'
[SetGlobalVar]
  == Registered application 'SetGlobalVar'
[SetLanguage]
  == Registered application 'SetLanguage'
[SetVar]
  == Registered application 'SetVar'
[StripMSD]
  == Registered application 'StripMSD'
[Suffix]
  == Registered application 'Suffix'
[Wait]
  == Registered application 'Wait'
[WaitExten]
  == Registered application 'WaitExten'
Asterisk Dynamic Loader Starting:
  == Parsing '/etc/asterisk/modules.conf': Found
[chan_modem.so] => (Generic Voice Modem Driver)
  == Parsing '/etc/asterisk/modem.conf': Found
  == Loading modem driver chan_modem_aopen.so => (A/Open (Rockwell
Chipset) ITU-2 VoiceModem Driver)
  == Registered channel type 'Modem' (Generic Voice Modem Channel
Driver)
[res_musiconhold.so] => (Music On Hold Resource)
  == Parsing '/etc/asterisk/musiconhold.conf': Found
Aug 11 08:29:42 WARNING[6888]: res_musiconhold.c:565 moh_register:
Unable to open pseudo channel for timing...  Sound may be choppy.
  == Registered application 'MusicOnHold'
  == Registered application 'WaitMusicOnHold'
  == Registered application 'SetMusicOnHold'
[res_indications.so] => (Indications Configuration)
  == Parsing '/etc/asterisk/indications.conf': Found
    -- Registered indication country 'cl'
    -- Registered indication country 'tw'
    -- Registered indication country 'us'
    -- Registered indication country 'au'
    -- Registered indication country 'fr'
    -- Registered indication country 'de'
    -- Registered indication country 'nl'
    -- Registered indication country 'uk'
    -- Registered indication country 'fi'
    -- Registered indication country 'no'
    -- Registered indication country 'br'
    -- Registered indication country 'za'
    -- Registered indication country 'it'
    -- Registered indication country 'us-o'
    -- Registered indication country 'gr'
    -- Registered indication country 'ru'
    -- Registered indication country 'nz'
    -- Registered indication country 'sg'
    -- Registered indication country 'hu'
    -- Registered indication country 'lt'
    -- Registered indication country 'pl'
    -- Registered indication country 'pt'
    -- Registered indication country 'ee'
    -- Registered indication country 'mx'
    -- Registered indication country 'se'
    -- Setting default indication country to 'us'
  == Registered application 'Playtones'
  == Registered application 'StopPlaytones'
[res_features.so] => (Call Parking Resource)
  == Parsing '/etc/asterisk/features.conf': Found
    -- Registered extension context 'parkedcalls'
    -- Added extension '700' priority 1 to parkedcalls
  == Registered application 'ParkedCall'
  == Registered application 'Park'
  == Manager registered action ParkedCalls
[res_agi.so] => (Asterisk Gateway Interface (AGI))
  == Registered application 'DeadAGI'
  == Registered application 'EAGI'
  == Registered application 'AGI'
[res_crypto.so] => (Cryptographic Digital Signatures)
    -- Loaded PUBLIC key 'iaxtel'
    -- Loaded PUBLIC key 'freeworlddialup'
[res_adsi.so] => (ADSI Resource)
  == Parsing '/etc/asterisk/adsi.conf': Found
[res_monitor.so] => (Call Monitoring Resource)
  == Registered application 'Monitor'
  == Registered application 'StopMonitor'
  == Registered application 'ChangeMonitor'
  == Manager registered action Monitor
  == Manager registered action StopMonitor
  == Manager registered action ChangeMonitor
[app_sms.so] => (SMS/PSTN handler)
  == Registered application 'SMS'
[app_hasnewvoicemail.so] => (Indicator for whether a voice mailbox has
messages in a given folder.[)
  == Registered application 'HasVoicemail'
  == Registered application 'HasNewVoicemail'
[format_wav_gsm.so] => (Microsoft WAV format (Proprietary GSM))
  == Registered file format wav49, extension(s) WAV|wav49
[app_url.so] => (Send URL Applications)
  == Registered application 'SendURL'
[chan_modem_i4l.so] => (ISDN4Linux Emulated Modem Driver)
[app_test.so] => (Interface Test Application)
  == Registered application 'TestClient'
  == Registered application 'TestServer'
[chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
  == Parsing '/etc/asterisk/mgcp.conf': Found
  == MGCP Listening on 0.0.0.0:2727
  == Using TOS bits 0
  == Registered channel type 'MGCP' (Media Gateway Control Protocol
(MGCP))
[app_eval.so] => (Reevaluates strings)
  == Registered application 'Eval'
[chan_zap.so] => (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
Aug 11 08:29:42 WARNING[6888]: chan_zap.c:9651 setup_zap: Ignoring
switchtype
Aug 11 08:29:42 WARNING[6888]: chan_zap.c:778 zt_open: Unable to specify
channel 1: No such device or address
Aug 11 08:29:42 ERROR[6888]: chan_zap.c:6239 mkintf: Unable to open
channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Aug 11 08:29:42 ERROR[6888]: chan_zap.c:9191 setup_zap: Unable to
register channel '1'
Aug 11 08:29:42 WARNING[6888]: loader.c:345 ast_load_resource:
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Aug 11 08:29:42 WARNING[6888]: loader.c:440 load_modules: Loading module
chan_zap.so failed!






-- 
Dave Williams
Solutions Architect
Sun Microsystems, Inc.
Dallas, TX
w-(972)934-6367
m-(214)563-8619

Tzafrir Cohen

2005-Aug-13 00:01 UTC

head link

[Asterisk-Users] wildcard/FXO config

On Thu, Aug 11, 2005 at 11:20:41PM -0500, David Williams
wrote:> Trying to config the latest Asterisk/zaptel with an Digium Wildcard and a
> single X100m FXO interface connected to a POTS analog line.
> 
> Build and install of both work ok  - I'm using Suse 8 on a dual Pentium
> box. I load the driver with "modprobe wctdm" and the LED on the
wildcard
> lights up. Then I start Asterisk with "asterisk -vvvgc" and
asterisk fails
> to start.
> The messages look pretty good till the last few lines..
Shouldn't wcfxo be used for X100P (and clones)?

On zaptel 1.0 wctdm is simply an alias to wcfxs, right?

What is the output of:

  lsmod | grep zaptel
  cat /proc/zaptel/*

-- 
Tzafrir Cohen         | tzafrir@jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir@cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend

Paul Mahler

2005-Aug-13 22:17 UTC

head link

[Asterisk-Users] wildcard/FXO config

Note that the single line card will not work in a variety of more recent
servers including Dell servers. 

First, you have to get the card configured to run with Linux. This means
loading the correct driver and then configuring the driver. The driver
configuration information is held in the file /etc/zaptel.conf. Here is what
you need in zaptel.conf to configure your single port FXO board:

loadzone=us 
defaultzone=us
fxsls=1 ; fxl interface on fxo port
        ; channel one
        ; loop start

The command ztcfg uses the contents of the file, zaptel.conf, to configure the
driver. 

The file /etc/asterisk/zapata.conf contains the information used to configure *
for the board. Here is a working example of a configuration for the single line
FXO card. 

; zapta.conf configuration file 
; Contact : support@signate.com 
[channels] 
language=en  
context=main 
signalling=fxs_ls 
usecallerid=yes  
hidecallerid=no 
callwaiting=yes 
usecallingpres=yes  
callwaitingcallerid=yes 
threewaycalling=yes 
transfer=yes  
cancallforward=yes 
callreturn=yes 
group=1 
callgroup=1 
pickupgroup=1  
immediate=no 
context=main  
callerid="Your Name" <555-1212> 
channel => 1 

Hope this helps.

Paul Mahler
pmahler@signate.com
http://www.signate.com

Possibly Parallel Threads

Search for more maybe matching threads

asterisk users - Aug 2005 - wildcard/FXO config

[Asterisk-Users] wildcard/FXO config

[Asterisk-Users] wildcard/FXO config

[Asterisk-Users] wildcard/FXO config

Possibly Parallel Threads