search for: fxo

Hi all, I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in my office. the out going calls symptom like when called party pickup the phone but the calling party still hearing the ring tone from the IP phone. Please light me up. it been many sleepless night by googling around trying to get the right answers. Th...

...#39;t get mine to work, I tried all the obvious settings. The cb-24 gets stuck at init ESF framing, as if it's not seeing the t1 card at all. It does get a t1 carrier (detecting voltage??) Help! Thanks.. Everything appears to look good on the server, I did: [zaptel.conf] span=1,0,0,esf,b8zs fxogs=1-24 [zapata.conf] signalling=fxo_gs channel => 1-24 Tried ks, ls, still no dice. ztcfg -vvv reports: SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: FXO Groundstart (Default) (Slaves: 01) Channel 02: FXO Groundstart (Default) (Slaves: 02) Channel 03: F...

I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS). These connect to a Digium TE210P card. I'm running kernel 2.6.10 and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today. The results are the same for all versions: Right after I reboot, and modprobe wct4xxp, my analog phone connected to port 13 of the...

...l, I bought a Sangoma A200 card from an online supplier and explained exactly what I wanted, 3 incoming phone lines to PBX and a life line (some where to connect a standard BT phone to the PBX incase the power goes, making the BT phone ring). I was told to order 1 x FXS module (2 FXS ports) 2 x FXO modules (4 FXO ports) However being a complete noob, I have connected the 3 lines to the PBX and have all but 1 line working (BT Featureline problems), but after a month or playing, I realised I have 4 FXS ports and 2 FXO ports. --- [root at asterisk ~]# ztcfg -vvv Zaptel Version: 1.4.9.2 Echo C...

I have an analogue line connected to an FXO module on a TDM400. I want to use the FXO line only for outgoing calls - incoming calls are answered by other equipment, but even if I don't specify an "s" extension, the FXO module still seizes the line for all incoming calls. Is it possible to configure the FXO module to ignore ring...

Hello Experts. Im working with Asterisk PBXand freeswitch PBX. I have a challenge with FXO card in Asterisk and i could not solve it yet. I hope you could guide me in this regards. When i want route the call to FXO channels, Before the callee answer the phone (pick up phone), The channel is answered with FXO card. How can change this treat so that the callee dont answer the phone, the ch...

Is anyone using Vonage on an FXO port in Asterisk? How well does it work? Specifically, any echo/delay problems? Second part, I am assuming it is possible to separate fxo ports for least cost routing correct? In other words, I would like the routing to be such that any local or 1-800# dials fxo ports 1-4 which is a normal 4 lin...

All, Experiencing some issues on my FXO lines. If a call comes in on an FXO and then get transferred to another FXO (say to call someones cell phone), those two lines will stay tied together indefinitely. This happens to us when we transfer an incoming call to our on call guys after hours and on weekends. We have installed 3 other * boxe...

Hi- I'm totally stumped configuring my TDM400P with one FXS and one FXO module. Before I got the FXO module, I used to have an X101P, and everything was working very well. Now * doesn't seem to recognize the FXO channel. I've searched the wiki and the list archives. Stock Debian 3.0 stable installation. Any advice? Thanks. -- David Here's my configur...

I am currently having our new office wired up with 8 PSTN lines. The guy asked me if he could wire it up such that one line had two phone numbers. I bought a Sangoma A200 with 8 FXO ports, but now I'm wondering if all I needed were 4 FXO ports. Is it possible to set up Asterisk with 2 numbers per FXO? Thanks for any help, Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20...

I'm running Asterisk (stable branch downloaded 2-Sep-05) on RedHat 9 and I have a TDM22B installed (TDM400 w/ 2 FXO and 2 FXS ports). Everything seems to work except threeway calling. I can establish a threeway call, but it uses up BOTH FXO lines. Note that I DO have threeway calling active with my Bell service. Here's a typical scenario: 1) Call 765-1574, 2) When they answer, press flash and call 735-10...

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience...

Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and zaptel (1.2.5). The problem is that 6 modules can't be initaized and i get the folowing error: May 7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No such device May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such device here = 0, tmp->c...

Hi. I have been searching through old threads and various forums, but can't seem to find out what the consensus view is here on the best type of FXO hardware to use for a home asterisk implementation. Specifically, should I buy a FXO ATA like the Sipura 3000, or a PCI form factor port like the Digium TDM400 series. I have read horrible things about problems with the X100P, so I have ruled that out. The Sipura 3000 gives me the ability to get...

Hello-- In the interest of Symmetry, does anyone else in the world see any need for a device like the IAXy (or the SIP ones from other manufacturers, like the ATA186), but one that presents an FXO interface instead, so it can be connected not to phones, but the PSTN? murf

...sterisk, I'm looking to dump my current phone system (Nortel Venture). I presently have three POTS lines. I would use a VOIP provider, but now are presently available in the Toronto, ON, CANADA area that support user owned hardware/software. I need a 416/647 area code number. In looking at FXO cards to atteach to the lines, I've seen the Digum single port FXO card and their multipoort FXS cards. So far, the cheapest route seems to be to buy three Digum FXO cards; however, the system I want to use them it only has some three/four PCI slots. Having one card with three FXO ports woul...

...the right extension. We are in Argentina, so buying a star talk is out of the question, there is no selling of that in here. So, we want to use * as an auto attendant and voicemail for our 50 extensions. Is there anybody who has done that? What topology do we have to use? : 1) pstn line -> (fxo) asterisk (fxs) -> norstar or 2) pstn line -> (fxo/1) asterisk (fxo/2) -> ata -> (ext. 123) norstar or 3) pstn line -> norstar (ext. 123) -> ata/1 -> (fxo/1) asterisk (fxo/2) -> ata/2 -> (ext.321) norstar or 4) pstnl line -> norstar (ext. 123) -> ata -> (fxo) ast...

Perhaps someone with more experience can help me solve this puzzle: Asterisk 1.4.18 on a Dell PowerEdge SC440, CentOS 5, 2.6.18-53.1.14.el5, Digium TDM400 with 3FXO(1-3) and 1FXS(4) Phone service is provided by XO Communications via their XOptionsFlex service (5 analog lines, 3 of which are used by Asterisk). For simplicity I refer to them as xx43, xx44, and xx45 - based on their phone numbers. They are connected to the Digium as follows: xx43 = FXO 1 xx44 =...

...attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to post screen shots for others on our website after I figure it out and test it, assuming it performs well. The lack of a reliable and inexpensive FXO interface for * rules it out in one of the largest potential markets, small business PBX systems. The lack of r...

Hi, today a customer asked how to use asterisk with 12 to 16 FXO ports. I can use a channel bank with 16 FXO ports and connect the channel bank with a T1 cable to a T1 card in the Asterisk Server. Asterisk will then send the calls to the Voip provider over the internet. However a 16 fxo port channel bank is about USD 1500 + a t1 card USD 500 + a USD 1000 comput...